MIKROE-2501

MIKROE-2501 Datasheet

THERMO K click IC/Module MCP9600 datasheet [1] Interface I2C Power supply 3.3V or 5V Product page shop.mikroe.com/click/sensors/thermo-k [2] Schematic THERMO K click schematic [3]

Part	Datasheet
MIKROE-2501	MIKROE-2501 (pdf)

PDF Datasheet Preview
THERMO K click THERMO K click THERMO K click THERMO K click IC/Module MCP9600 datasheet [1] Interface I2C Power supply 3.3V or 5V Product page shop.mikroe.com/click/sensors/thermo-k [2] Schematic THERMO K click schematic [3] THERMO K click carries the MCP9600 IC from Microchip and depending on the type of probe it uses, the click can measure temperatures from −200 °C to +1372 °C. THERMO K click is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface. Features and usage notes Temperature range With the type-K probe, available in our store [4], this click can measure temperature up to +480 °C. MCP9600 from Microchip The MCP9600 IC converts thermocouple EMF to degree Celsius with integrated Cold-Junction compensation. It corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±1.5°C accurate temperature data. 4 alert outputs THERMO K click has 4 alert outputs onboard that can be used to detect multiple temperature zones. You can define on which specific temperature the THERMO K click will send an alarm. THERMO K click Low power modes Low-Power modes are available for battery-powered applications. In shut-down mode the module uses only 2 µA. Thermocouple probe In order to use THERMO K click you need to connect the appropriate K-type thermocouple probe not included in the package into the PCC-SMP connector. Key features • MCP9600 IC from Microchip • Four Programmable Temperature Alert Outputs • Operating Current 300 µA typical • Shutdown Current 2 µA typical • Interface I2C • 3.3V or 5V power supply Jumpers and settings Designator Name Default Position PWR.SEL. Left ADDR. Right SEL. Default Option 3V3 GND Description describe the use + list all options with respective descriptions Power Supply Voltage Selection 3V3/5V, left position 3v3, right position 5V I2C address Selection. Left position VDD is 1100111x and right position GND is Additional information Our store [5] offers Thermocouple Type-K Glass Braid Insulated probes. Pinout diagram This table shows how the pinout on THERMO K click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns . Notes Notes Alert 4 output ALERT4 1 AN mikroBUStm X PWM 16 ALERT2 Alert 2 output Alert 3 output ALERT3 2 RST INT 15 ALERT1 Alert 1 output Not connected NC

PDF Datasheet Preview

THERMO K click

THERMO K click

THERMO K click

THERMO K click IC/Module MCP9600 datasheet [1] Interface I2C Power supply 3.3V or 5V Product page shop.mikroe.com/click/sensors/thermo-k [2] Schematic THERMO K click schematic [3]

THERMO K click carries the MCP9600 IC from Microchip and depending on the type of probe it uses, the click can measure temperatures from −200 °C to +1372 °C. THERMO K click is designed to run either on 3.3V or 5V power supply. It communicates with the target MCU through I2C interface.

Features and usage notes

Temperature range

With the type-K probe, available in our store [4], this click can measure temperature up to +480 °C.

MCP9600 from Microchip

The MCP9600 IC converts thermocouple EMF to degree Celsius with integrated Cold-Junction compensation. It corrects the thermocouple nonlinear error characteristics of eight thermocouple types and outputs ±1.5°C accurate temperature data.
4 alert outputs

THERMO K click has 4 alert outputs onboard that can be used to detect multiple temperature zones. You can define on which specific temperature the THERMO K click will send an alarm.

THERMO K click

Low power modes

Low-Power modes are available for battery-powered applications. In shut-down mode the module uses only 2 µA.

Thermocouple probe

In order to use THERMO K click you need to connect the appropriate K-type thermocouple probe not included in the package into the PCC-SMP connector.

Key features
• MCP9600 IC from Microchip
• Four Programmable Temperature Alert Outputs
• Operating Current 300 µA typical
• Shutdown Current 2 µA typical
• Interface I2C
• 3.3V or 5V power supply

Jumpers and settings

Designator Name

Default Position

PWR.SEL. Left

ADDR.

Right

SEL.

Default Option 3V3 GND

Description describe the use + list all options with respective descriptions

Power Supply Voltage Selection 3V3/5V, left position 3v3, right position 5V I2C address Selection. Left position VDD is 1100111x and right position GND is

Additional information

Our store [5] offers Thermocouple Type-K Glass Braid Insulated probes.

Pinout diagram

This table shows how the pinout on THERMO K click corresponds to the pinout on the mikroBUS socket the latter shown in the two middle columns .

Notes

Notes

Alert 4 output ALERT4 1 AN
mikroBUStm X PWM 16 ALERT2 Alert 2 output

Alert 3 output ALERT3 2 RST

INT 15 ALERT1 Alert 1 output

Not connected NC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-2501 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-2501 649494