IS61WV3216DBLL-10TLI-TR

IS61WV3216DBLL-10TLI-TR Datasheet

IS61WV3216DALL/DALS IS61WV3216DBLL/DBLS IS64WV3216DBLL/DBLS

Part	Datasheet
IS61WV3216DBLL-10TLI-TR	IS61WV3216DBLL-10TLI-TR (pdf)

Related Parts	Information
IS61WV3216DBLL-10TLI	IS61WV3216DBLL-10TLI

PDF Datasheet Preview
IS61WV3216DALL/DALS IS61WV3216DBLL/DBLS IS64WV3216DBLL/DBLS 32K x 16 HIGH SPEED ASYNCHRONOUS CMOS STATIC RAM MAY 2012 FEATURES HIGH SPEED IS61/64WV3216DALL/DBLL • High-speed access time 8, 10, 12, 20 ns • Low Active Power 135 mW typical • Low Standby Power 12 µW typical CMOS standby LOW POWER IS61/64WV3216DALS/DBLS • High-speed access time 25, 35 ns • Low Active Power 55 mW typical • Low Standby Power 12 µW typical CMOS standby • Single power supply Vdd 1.65V to 2.2V IS61WV3216DAxx Vdd 2.4V to 3.6V IS61/64WV3216DBxx • Fully static operation no clock or refresh required • Three state outputs • Data control for upper and lower bytes • Industrial and Automotive temperature support • Lead-free available DESCRIPTION The ISSI IS61WV3216DAxx/DBxx and IS64WV3216DBxx are high-speed, 524,288-bit static RAMs organized as 32,768 words by 16 bits. It is fabricated using ISSI's high- performance CMOS technology.This highly reliable process coupled with innovative circuit design techniques, yields high-performance and low power consumption devices. When CE is HIGH deselected , the device assumes a standby mode at which the power dissipation can be reduced down with CMOS input levels. Easy memory expansion is provided by using Chip Enable and Output Enable inputs, CE and OE. The active LOW Write Enable WE controls both writing and reading of the memory. A data byte allows Upper Byte UB and Lower Byte LB access. The IS61WV3216DAxx/DBxx and IS64WV3216DBxx are packaged in the JEDEC standard 44-pin TSOP Type II and 48-pin Mini BGA 6mm x 8mm . FUNCTIONAL BLOCK DIAGRAM A0-A14 DECODER 32K x 16 MEMORY ARRAY VDD GND I/O0-I/O7 Lower Byte I/O8-I/O15 Upper Byte I/O DATA CIRCUIT COLUMN I/O CONTROL CIRCUIT Copyright 2012 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest version of this device specification before relying on any published information and before placing orders for products. Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that a. the risk of injury or damage has been minimized b. the user assume all such risks and c. potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances Integrated Silicon Solution, Inc. 05/14/2012 IS61WV3216DALL/DALS, IS61WV3216DBLL/DBLS, IS64WV3216DBLL/DBLS TRUTH TABLE I/O PIN Mode I/O0-I/O7 I/O8-I/O15 Not Selected High-Z High-Z Output Disabled High-Z High-Z High-Z High-Z Read Dout ORDERING INFORMATION HIGH SPEED Industrial Range -40°C to +85°C Voltage Range 2.4V to 3.6V Speed ns 8 Order Part No. IS61WV3216DBLL-8BI IS61WV3216DBLL-8BLI IS61WV3216DBLL-8TI IS61WV3216DBLL-8TLI IS61WV3216DBLL-10BI IS61WV3216DBLL-10BLI IS61WV3216DBLL-10TI IS61WV3216DBLL-10TLI Package 48 mini BGA 6mm x 8mm 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II TSOP Type II , Lead-free 48 mini BGA 6mm x 8mm 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II TSOP Type II , Lead-free Industrial Range -40°C to +85°C Voltage Range 1.65V to 2.2V Speed ns Order Part No. IS61WV3216DALL-20BLI IS61WV3216DALL-20TLI Package 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II , Lead-free Automotive Range -40°C to +125°C Voltage Range 2.4V to 3.6V Speed ns Order Part No. IS64WV3216DBLL-10BA3 IS64WV3216DBLL-10BLA3 IS64WV3216DBLL-10CTA3 IS64WV3216DBLL-10CTLA3 Package 48 mini BGA 6mm x 8mm 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II , Copper Leadframe TSOP Type II , Lead-free, Copper Leadframe ORDERING INFORMATION LOW POWER - IN EVALUATION Industrial Range -40°C to +85°C Voltage Range 2.4V to 3.6V Speed ns 35 Order Part No. Package IS61WV3216DBLS-35TLI TSOP Type II , Lead-free Integrated Silicon Solution, Inc. 05/14/2012 IS61WV3216DALL/DALS, IS61WV3216DBLL/DBLS, IS64WV3216DBLL/DBLS Integrated Silicon Solution, Inc. NOTE : CONTROLLING DIMENSION MM DIMENSION D AND E1 DO NOT INCLUDE MOLD PROTRUSION. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION/INTRUSION. 06/04/2008 1 2 3 4 5 6 7 8 9 10 11 12 IS61WV3216DALL/DALS, IS61WV3216DBLL/DBLS, IS64WV3216DBLL/DBLS 08/12/2008 NOTE : CONTROLLING DIMENSION MM Reference document JEDEC MO-207 Integrated Silicon Solution, Inc. 05/14/2012

PDF Datasheet Preview

IS61WV3216DALL/DALS IS61WV3216DBLL/DBLS IS64WV3216DBLL/DBLS
32K x 16 HIGH SPEED ASYNCHRONOUS CMOS STATIC RAM

MAY 2012

FEATURES HIGH SPEED IS61/64WV3216DALL/DBLL
• High-speed access time 8, 10, 12, 20 ns
• Low Active Power 135 mW typical
• Low Standby Power 12 µW typical

CMOS standby LOW POWER IS61/64WV3216DALS/DBLS
• High-speed access time 25, 35 ns
• Low Active Power 55 mW typical
• Low Standby Power 12 µW typical

CMOS standby
• Single power supply

Vdd 1.65V to 2.2V IS61WV3216DAxx Vdd 2.4V to 3.6V IS61/64WV3216DBxx
• Fully static operation no clock or refresh required
• Three state outputs
• Data control for upper and lower bytes
• Industrial and Automotive temperature support
• Lead-free available

DESCRIPTION The ISSI IS61WV3216DAxx/DBxx and IS64WV3216DBxx
are high-speed, 524,288-bit static RAMs organized as
32,768 words by 16 bits. It is fabricated using ISSI's high-
performance CMOS technology.This highly reliable process coupled with innovative circuit design techniques, yields high-performance and low power consumption devices.

When CE is HIGH deselected , the device assumes a standby mode at which the power dissipation can be reduced down with CMOS input levels.

Easy memory expansion is provided by using Chip Enable and Output Enable inputs, CE and OE. The active LOW Write Enable WE controls both writing and reading of the memory. A data byte allows Upper Byte UB and Lower Byte LB access.

The IS61WV3216DAxx/DBxx and IS64WV3216DBxx are packaged in the JEDEC standard 44-pin TSOP Type II and 48-pin Mini BGA 6mm x 8mm .

FUNCTIONAL BLOCK DIAGRAM

A0-A14

DECODER
32K x 16 MEMORY ARRAY

VDD GND

I/O0-I/O7 Lower Byte

I/O8-I/O15 Upper Byte

I/O DATA CIRCUIT

COLUMN I/O

CONTROL CIRCUIT

Copyright 2012 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest version of this device specification before relying on any published information and before placing orders for products.

Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written assurance to its satisfaction, that a. the risk of injury or damage has been minimized b. the user assume all such risks and c. potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances

Integrated Silicon Solution, Inc.
05/14/2012

IS61WV3216DALL/DALS, IS61WV3216DBLL/DBLS, IS64WV3216DBLL/DBLS

TRUTH TABLE

I/O PIN

Mode

I/O0-I/O7 I/O8-I/O15

Not Selected

High-Z

High-Z

Output Disabled

High-Z High-Z

High-Z High-Z

Read

Dout
ORDERING INFORMATION HIGH SPEED

Industrial Range -40°C to +85°C

Voltage Range 2.4V to 3.6V

Speed ns 8

Order Part No.

IS61WV3216DBLL-8BI IS61WV3216DBLL-8BLI IS61WV3216DBLL-8TI IS61WV3216DBLL-8TLI

IS61WV3216DBLL-10BI

IS61WV3216DBLL-10BLI

IS61WV3216DBLL-10TI

IS61WV3216DBLL-10TLI

Package
48 mini BGA 6mm x 8mm 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II TSOP Type II , Lead-free
48 mini BGA 6mm x 8mm 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II TSOP Type II , Lead-free

Industrial Range -40°C to +85°C

Voltage Range 1.65V to 2.2V

Speed ns Order Part No.

IS61WV3216DALL-20BLI

IS61WV3216DALL-20TLI

Package
48 mini BGA 6mm x 8mm , Lead-free TSOP Type II , Lead-free

Automotive Range -40°C to +125°C

Voltage Range 2.4V to 3.6V

Speed ns Order Part No.

IS64WV3216DBLL-10BA3

IS64WV3216DBLL-10BLA3

IS64WV3216DBLL-10CTA3

IS64WV3216DBLL-10CTLA3

Package
48 mini BGA 6mm x 8mm 48 mini BGA 6mm x 8mm , Lead-free TSOP Type II , Copper Leadframe TSOP Type II , Lead-free, Copper Leadframe
ORDERING INFORMATION LOW POWER - IN EVALUATION

Industrial Range -40°C to +85°C

Voltage Range 2.4V to 3.6V

Speed ns 35

Order Part No.

Package

IS61WV3216DBLS-35TLI TSOP Type II , Lead-free

Integrated Silicon Solution, Inc.
05/14/2012

IS61WV3216DALL/DALS, IS61WV3216DBLL/DBLS, IS64WV3216DBLL/DBLS

Integrated Silicon Solution, Inc.

NOTE :

CONTROLLING DIMENSION MM

DIMENSION D AND E1 DO NOT INCLUDE MOLD PROTRUSION.

DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION/INTRUSION.
06/04/2008
1 2 3 4 5 6 7 8 9 10 11 12

IS61WV3216DALL/DALS, IS61WV3216DBLL/DBLS, IS64WV3216DBLL/DBLS
08/12/2008

NOTE :

CONTROLLING DIMENSION MM Reference document JEDEC MO-207

Integrated Silicon Solution, Inc.
05/14/2012

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IS61WV3216DBLL-10TLI-TR Datasheet file may be downloaded here without warranties.

Datasheet ID: IS61WV3216DBLL-10TLI-TR 639304