MIKROE-1969

MIKROE-1969 Datasheet


With two mikroBUS sockets on clicker 2, you can take advantage of the huge potential of click boards, the constantly expanding range of over 196 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away:

Part Datasheet
MIKROE-1969 MIKROE-1969 MIKROE-1969 (pdf)
PDF Datasheet Preview
Page 1 of 7

All the inventions waiting to happen...
clicker 2 is a battery-powered click board two-seater. Inventing and putting together fully-functional standalone gadgets is now just 1% perspiration, and 99% inspiration!

Thousands of possibilities
19110 CLICK BOARD COMBINATIONS

With two mikroBUS sockets on clicker 2, you can take advantage of the huge potential of click boards, the constantly expanding range of over 196 add-on boards. Blend different functionalities together and come up with new and original inventions. That’s just two clicks and your project is half-way done. Go ahead and play with a few ideas right away:

Page 2 of 7

Security ensured

This clicker 2 is powered by CEC1302, a 32-bit MCU from Microchip that integrates a cryptographic engine that provides high level security features.
• Authentication with public key algorithms RSA-2048
• Integrity with Secure Hash Algorithms SHA-1, SHA-256
• Privacy with symmetric encryption AES
• Entropy with true Random Number Generator CEC1302 has 128 KB SRAM, 32 KB boot ROM, and runs at 48MHz.

Page 3 of 7

Powering Your Inventions

Focus on your main idea because clicker 2 will take care of the details for you your prototype already has a power management system in place. The onboard IC will provide 3.3V or 5V to the clicks. It turns the USB port into a battery charger. For convenience, clicker 2 for CEC1302 features a reset button and an ON/OFF switch you can also connect an external ON/OFF switch .

Page 4 of 7

Expanding Your Ideas

No idea is too big for clicker Let your train of thought lead you anywhere. Consider all options, explore all directions. More click boards? Additional electronics? Done and done. clicker 2 has the same pocket-size form factor and the same pair of 1x26 connection pads as mikromedia boards. This makes it compatible with mikromedia shields letting you expand your device any way you want.

Page 5 of 7

MIKROE-1154 mikroBUS shield

MIKROE-938 Connect shield

MIKROE-767 PHOTO shield

MIKROE-712 Battery Boost shield

Hardware Debugging

Efficiently erradicate any bugs and iron out your code until it’s wrinkle free and your clicker 2 device works mikroProg for CEC1302. It’s a fast hardware debugger and programmer that exploits the MCU’s integrated encryption module, enabling secure firmware updating.

Tech specs

Pushbuttons, signal LEDs, jumpers, pads for connecting an external ON/OFF switch, here are all the bits and details at your disposal:

Page 6 of 7

Processor
- CEC1302 has 128 KB SRAM - 32 KB boot ROM - 48MHz

Connectivity
- 52 programmable GPIOs - 2 mikroBUS host sockets - USB Mini-B connector

Documentation and software

Download Shematic [6.43MB]

Download UART Bootloader [1.05MB]

Download mikroProg Suite for ARM [2.3MB]

What’s in the package?

Page 7 of 7

Order Now

MIKROE-1969
clicker 2 for CEC1302
5/2/2016
More datasheets: DBMY-5W5P-K87 | BH5DSF | LTL914SEKS | LTL914SYKS | DBMMG5C5PJK87 | APT30DS20HJ | MB85RS2MTPH-G-JNE1 | MB85RS2MTPF-G-JNERE2 | VKI50-06P1 | JW150G1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MIKROE-1969 Datasheet file may be downloaded here without warranties.

Datasheet ID: MIKROE-1969 649293