JW150G1

JW150G1 Datasheet


JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W

Part Datasheet
JW150G1 JW150G1 JW150G1 (pdf)
PDF Datasheet Preview
Data Sheet March 2008

JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W

The JW100G and JW150G Power Modules use advanced, surface-mount technology and delivers high-quality, efficient, and compact dc-dc conversion.
n Distributed power architectures n Computer equipment n Communications equipment

Options
n Heat sinks available for extended operation n Choice of remote on/off logic configuration n Short pins mm ± mm
in. in.
n Small size mm x mm x mm in. x in. x in.
n High power density
n High efficiency 76% typical
n Low output noise
n Constant frequency
n Industry-standard pinout
n Metal baseplate and case ground pin
n 2:1 input voltage range
n Overcurrent, overtemperature, and overvoltage protection
n Remote sense and remote on/off
n Adjustable output voltage
n Manufacturing facilities registered against the ISO* 9000 series standards
n UL† 60950 Recognized, C22.2 No. 6095000 Certified, and VDE § 0805 IEC **60950, 4th Edition Licensed
n CE mark meets 73/23/EEC and 93/68/EEC directives††
* ISO is a registered trademark of the International Organization for Standardization.
† UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Associa-
tion. § VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** IEC is a trademark of International Elecktrotechniker Commis-
sion. †† This product is intended for integration into end-use equipment.

All the required procedures for CE marking of end-use equipment should be followed. The CE mark is placed on selected products.

The JW100G and JW150G Power Modules are dc-dc converter that operate over an input voltage range of 36 Vdc to 75 Vdc and provide a precisely regulated dc output. The outputs are fully isolated from the inputs, allowing versatile polarity configurations and grounding connections. The module has a maximum power ratings of 50 W to 75 W at a typical full-load efficiency of

The sealed modules offer a metal baseplate for excellent thermal performance. Threaded-through holes are provided to allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications.

JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W

Data Sheet March 2008

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability.

Parameter

Input Voltage Continuous Transient 100 ms

I/O Isolation Voltage

Operating Case Temperature See Thermal Considerations section.

Storage Temperature

VI, trans

Tstg
80 100 1500 100

Unit
The temperature at this location should not exceed 100 °C. The output power of the module should not exceed the rated power for the module as listed in the Ordering Information table.

Although the maximum case temperature of the power module is 100 °C, you can limit this temperature to a lower value for extremely high reliability.

For additional information on these modules, refer to the Thermal Management JC-, JFC-, JW-, and JFWSeries 50 W to 150 W Board-Mounted Power Modules Technical Note TN97-008EPS .

Lineage Power

JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W

Data Sheet March 2008

Thermal Considerations continued

Heat Transfer Without Heat Sinks

Increasing airflow over the module enhances the heat transfer via convection. Figure 23 shows the maximum power that can be dissipated by the module without exceeding the maximum case temperature versus local ambient temperature TA for natural convection through 4 m/s 800 ft./min. .

Note that the natural convection condition was measured at m/s to m/s 10 ft./min. to 20 ft./min. however, systems in which these power modules may be used typically generate natural convection airflow rates of m/s 60 ft./min. due to other heat dissipating components in the system. The use of Figure 23 is shown in the following example.

POWER DISSIPATION, PD W
18 16

VI = 75 V

VI = 48 V

VI = 36 V
0 1 3 5 7 9 11 13 15 17 19 21

OUTPUT CURRENT, IO A
1-0061

Figure JW100G Power Dissipation vs. Output Current

Example What is the minimum airflow necessary for a JW150G operating at VI = 55 V, an output current of 30 A, and a maximum ambient temperature of 40 °C?

Solution Given VI = 55 V

IO = 30 A TA = 40 °C Determine PD Use Figure PD = W Determine airflow v Use Figure v = m/s 600 ft./min.

POWER DISSIPATION, PD W
m/s 800 ft./min.
m/s 700 ft./min.
m/s 600 ft./min.
m/s 500 ft./min.
m/s 400 ft./min.
m/s 300 ft./min.
m/s 200 ft./min.
m/s 100 ft./min.
5 m/s NAT. CONV. 20 ft./min.
0 10 20 30 40 50 60 70 80 90 100

LOCAL AMBIENT TEMPERATURE, TA °C
8-1150 F .a

Figure Forced Convection Power Derating with No Heat Sink Either Orientation

POWER DISSIPATION, PD W

VI = 36 V

VI = 55 V

VI = 75 V

OUTPUT CURRENT, IO A
Ordering Information

Please contact your Lineage Power Account Manager or Field Application Engineer for pricing and availability.

Table Device Codes

Input Voltage
48 V 48 V 48 V 48 V

Output Voltage

Output Power 50 W 50 W 75 W 75 W

Output Current
20 A 20 A 30 A 30 A

Remote On/Off Logic

Negative Positive Negative Positive

Device Code JW100G1 JW100G JW150G1 JW150G

Comcode
108553256 TBD
108457706 TBD

Optional features can be ordered using the suffixes shown in Table The suffixes follow the last letter of the device code and are placed in descending order. For example, the device code for a JW100G1 module with the following option is shown below:

Short pins

JW100G61

Table Device Options

Option Short pins mm ± mm
in. ± in.

Suffix 6

Lineage Power

Data Sheet March 2008

JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W
Ordering Information continued

Table Device Accessories

Accessory 1/4 in. transverse kit heat sink, thermal pad, and screws 1/4 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws 1 in. transverse kit heat sink, thermal pad, and screws 1 in. longitudinal kit heat sink, thermal pad, and screws 1/2 in. transverse kit heat sink, thermal pad, and screws 1/2 in. longitudinal kit heat sink, thermal pad, and screws

Dimensions are in millimeters and inches .

Comcode
407243989 407243997 407244706 407244714 407244722 407244730 407244748 407244755
1/4 IN. 1/2 IN.
1 IN.
1/2 IN.
1/4 IN.
1/2 IN.
1 IN.
1/2 IN.
8-2832 F .a

Figure Longitudinal Heat Sink

Figure Transverse Heat Sink
8-2833 F

Lineage Power

JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W

Notes

Data Sheet March 2008

Lineage Power

JW100G and JW150G Power Modules dc-dc Converters 36 Vdc to 75 Vdc Input, Vdc Output 50 W to 75 W

Data Sheet March 2008

A sia-Pacific Head qu art ers T el +65 6 41 6 4283

World W ide Headq u arters Lin eag e Po wer Co rp oratio n 30 00 Sk yline D riv e, Mes quite, T X 75149, U SA +1-800-526-7819 Outs id e U .S.A +1- 97 2-2 84 -2626 ag ep ower.co m e-m ail tech sup lin ea gep ower.co m

Eu ro pe, M id dle-East an d Afric a He ad qu arters Tel +49 8 9 6089 286

Ind ia Head qu arters Tel +91 8 0 28411633

Lineage Power reserves the right to make changes to the produc t s or inform ation contained herein without notice. No liability is ass umed as a res ult of their use or applic ation. No rights under any patent acc ompany the sale of any s uc h pr oduct s or information.
2008 Lineage Power Corpor ation, Mesquite, Texas All International Rights Res er ved.

March 2008 DS00-077EPS Replaces DS00-076EPS
More datasheets: LTS-6760P | DBMY-5W5P-K87 | BH5DSF | LTL914SEKS | LTL914SYKS | DBMMG5C5PJK87 | APT30DS20HJ | MB85RS2MTPH-G-JNE1 | MB85RS2MTPF-G-JNERE2 | VKI50-06P1


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived JW150G1 Datasheet file may be downloaded here without warranties.

Datasheet ID: JW150G1 645697