UATM30M2C

UATM30M2C Datasheet

Part	Datasheet
UATM30M2C	UATM30M2C (pdf)

PDF Datasheet Preview
UATM30M2C Datasheet CENTELLAX - 30GHz Broadband MMIC Low-Noise Amplifier Application The UATM30M2C Broadband MMIC Low-Noise Amplifier is designed for low-noise and broadband flat-gain applications in RF and microwave communications, test equipment and military systems. By using specific external components, the bandwidth of operation can be extended below 40MHz. The UATM30M2C is an eight stage traveling wave amplifier. The amplifier has been designed for low noise, flat gain, and good return loss to 30GHz. The amplifier typically has 2.5dB NF and 18dB gain from 6-20GHz, and 16dB gain from 0.04-30GHz. The UATM30M2C has >30dB dynamic gain control, and includes a temperature-referenced power detector output. Device Highlights • Low noise, ultra-flat gain 6-20GHz • 2.5dB NF, 18 ± 0.3dB gain • Excellent 1.5-20GHz performance • Very flat gain 18 ± 0.6dB • High Psat at 20GHz 20dBm • High P-1dB at 20GHz 17dBm • Wideband operation 0.04-30GHz • Good input / output return loss • High isolation • >30dB dynamic gain control • Integrated power detector • 100% DC, RF, and visually tested • Size 2390x920um 94.1x36.2mil Key Specifications Vdd=5.0V, Idd=150mA, Zo=50Ω Specifications pertain to wafer measurements with RF probes and DC bias cards 25°C 6 - 20GHz - 20GHz - 30GHz Parameter Min Typ Max Min Typ Max Min Typ Max S21 dB Flatness ±dB S11 dB S22 dB S12 dB 18 -16 -13 -18 -15 -35 -30 18 -16 -13 -18 -15 -35 -30 16 -10 -8 -18 -15 -30 -25 P-1dB dBm 1dB Compressed Output Power Psat dBm Saturated Output Power Pout dBm Output Power at 16dB Gain NF dB Noise Figure 16 17 19 20 17 16 17 19 20 17 12 14 RFdet mV/mW RF Detector Sensitivity CENTELLAX • Web • Email • Tel • Fax Specifications subject to change without notice. Copyright 2001-2006 Centellax, Inc. Printed in USA. 19 Apr S21 dB UATM30M2C S21 5V, 150mA 7V, 190mA

PDF Datasheet Preview

UATM30M2C Datasheet

CENTELLAX
- 30GHz Broadband MMIC Low-Noise Amplifier

Application

The UATM30M2C Broadband MMIC Low-Noise Amplifier is designed for low-noise and broadband flat-gain applications in RF and microwave communications, test equipment and military systems. By using specific external components, the bandwidth of operation can be extended below 40MHz.

The UATM30M2C is an eight stage traveling wave amplifier. The amplifier has been designed for low noise, flat gain, and good return loss to 30GHz. The amplifier typically has 2.5dB NF and 18dB gain from 6-20GHz, and 16dB gain from 0.04-30GHz.

The UATM30M2C has >30dB dynamic gain control, and includes a temperature-referenced power detector output.

Device Highlights
• Low noise, ultra-flat gain 6-20GHz
• 2.5dB NF, 18 ± 0.3dB gain
• Excellent 1.5-20GHz performance
• Very flat gain 18 ± 0.6dB
• High Psat at 20GHz 20dBm
• High P-1dB at 20GHz 17dBm
• Wideband operation 0.04-30GHz
• Good input / output return loss
• High isolation
• >30dB dynamic gain control
• Integrated power detector
• 100% DC, RF, and visually tested
• Size 2390x920um 94.1x36.2mil

Key Specifications

Vdd=5.0V, Idd=150mA, Zo=50Ω

Specifications pertain to wafer measurements with RF probes and DC bias cards 25°C
6 - 20GHz
- 20GHz
- 30GHz

Parameter

Min Typ Max

Min Typ Max

Min Typ Max

S21 dB Flatness ±dB S11 dB S22 dB S12 dB
18 -16 -13 -18 -15 -35 -30
18 -16 -13 -18 -15 -35 -30
16 -10 -8 -18 -15 -30 -25

P-1dB dBm
1dB Compressed Output Power

Psat dBm

Saturated Output Power

Pout dBm Output Power at 16dB Gain

NF dB

Noise Figure
16 17 19 20 17
16 17 19 20 17
12 14

RFdet mV/mW RF Detector Sensitivity

CENTELLAX
• Web
• Email
• Tel
• Fax Specifications subject to change without notice. Copyright 2001-2006 Centellax, Inc. Printed in USA. 19 Apr

S21 dB

UATM30M2C S21
5V, 150mA
7V, 190mA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived UATM30M2C Datasheet file may be downloaded here without warranties.

Datasheet ID: UATM30M2C 649167