MT16JTF25664AY-1G4D1

MT16JTF25664AY-1G4D1 Datasheet

MT16JTF25664AY 2GB MT16JTF51264AY 4GB

Part	Datasheet
MT16JTF25664AY-1G4D1	MT16JTF25664AY-1G4D1 (pdf)

PDF Datasheet Preview
2GB, 4GB x64, DR 240-Pin DDR3 SDRAM UDIMM Features DDR3 SDRAM UDIMM MT16JTF25664AY 2GB MT16JTF51264AY 4GB For component data sheets, refer to Micron’s Web site: • DDR3 functionality and operations supported as per component data sheet • 240-pin, unbuffered dual in-line memory module UDIMM • Fast data transfer rates PC3-10600, PC3-8500, or PC3-6400 • 2GB 256 Meg x 64 , 4GB 512 Meg x 64 • VDD = VDDQ = +1.5V ± 075V • VDDSPD = + 3.0V to + 3.6V • Reset pin for improved system stability • Nominal and dynamic on-die termination ODT for data, strobe, and mask signals • Dual rank • 8 internal device banks for concurrent operation • Fixed burst length of 8 BL8 and burst chop of 4 BC4 via the mode register • Adjustable data-output drive strength • Serial presence-detect SPD EEPROM • Gold edge contacts • Pb-free • Addresses are mirrored for second rank • Fly-by topology • Terminated command, address, and control bus Figure 1 240-Pin UDIMM MO-269 R/C B PCB height 30mm 1.18in Options • Operating temperature1 Commercial 0°C TA +70°C Industrial TA +85°C • Frequency/CAS latency 1.5ns CL = 9 DDR3-1333 1.5ns CL = 10 DDR3-1333 1.87ns CL = 7 DDR3-1066 1.87ns CL = 8 DDR3-1066 2.5ns CL = 5 DDR3-800 2.5ns CL = 6 DDR3-800 Marking None I -1G4 -1G3 -1G1 -1G0 -80C -80B Notes Contact Micron for industrial temperature module offerings. Table 1: Speed Grade -1G4 -1G3 -1G1 -1G0 -80C -80B Key Timing Parameters Industry Nomenclature PC3-10600 PC3-10600 PC3-8500 PC3-8500 PC3-6400 PC3-6400 Data Rate MT/s CL = 10 CL = 9 CL = 8 CL = 7 CL = 6 1333 1066 800 1333 1066 800 1066 800 1066 800 CL = 5 tRCD ns tRP ns tRC ns

PDF Datasheet Preview

2GB, 4GB x64, DR 240-Pin DDR3 SDRAM UDIMM Features

DDR3 SDRAM UDIMM

MT16JTF25664AY 2GB MT16JTF51264AY 4GB

For component data sheets, refer to Micron’s Web site:
• DDR3 functionality and operations supported as per component data sheet
• 240-pin, unbuffered dual in-line memory module UDIMM
• Fast data transfer rates PC3-10600, PC3-8500, or PC3-6400
• 2GB 256 Meg x 64 , 4GB 512 Meg x 64
• VDD = VDDQ = +1.5V ± 075V
• VDDSPD = + 3.0V to + 3.6V
• Reset pin for improved system stability
• Nominal and dynamic on-die termination ODT for
data, strobe, and mask signals
• Dual rank
• 8 internal device banks for concurrent operation
• Fixed burst length of 8 BL8 and burst chop of
4 BC4 via the mode register
• Adjustable data-output drive strength
• Serial presence-detect SPD EEPROM
• Gold edge contacts
• Pb-free
• Addresses are mirrored for second rank
• Fly-by topology
• Terminated command, address, and control bus

Figure 1 240-Pin UDIMM MO-269 R/C B

PCB height 30mm 1.18in

Options
• Operating temperature1 Commercial 0°C TA +70°C Industrial TA +85°C
• Frequency/CAS latency
1.5ns CL = 9 DDR3-1333
1.5ns CL = 10 DDR3-1333
1.87ns CL = 7 DDR3-1066
1.87ns CL = 8 DDR3-1066
2.5ns CL = 5 DDR3-800
2.5ns CL = 6 DDR3-800

Marking

None I
-1G4 -1G3 -1G1 -1G0 -80C -80B

Notes Contact Micron for industrial temperature module offerings.

Table 1:

Speed Grade -1G4 -1G3 -1G1 -1G0
-80C -80B

Key Timing Parameters

Industry Nomenclature

PC3-10600 PC3-10600 PC3-8500 PC3-8500 PC3-6400 PC3-6400

Data Rate MT/s

CL = 10 CL = 9 CL = 8 CL = 7 CL = 6
1333 1066 800
1333 1066 800
1066 800
1066 800

CL = 5
tRCD ns
tRP ns
tRC ns

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MT16JTF25664AY-1G4D1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MT16JTF25664AY-1G4D1 648312