TPG100010

TPG100010 Datasheet

Part Number TPG100010

Part	Datasheet
TPG100010	TPG100010 (pdf)

PDF Datasheet Preview
Softlog ICP2PORT-P Production Quality In-Circuit Service Programmer Part Number TPG100010 The Softlog ICP2PORT-P Production Quality In-Circuit Service Programmer is specially designed to meet your service programming needs. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. Note All technical support and warranty service will be provided by Softlog. You can contact them at Fast programming of 8-bit MCUs, 16-bit PIC MCUs and DSCs, and serial EEPROMs On-board 4MB flash memory for non-volatile storage of 6 environments Supports 3 serialization schemes sequential, random, and user file 1 to 8 bytes Vdd and Vpp overload protection protects programmer and devices to be programmed Power supply 3 AAA batteries, USB or power adapter Configurable counter allows control of the number of upgrades performed Programmable Vdd to 5.5V and Vpp to 13.5V Programmable clock/data speed 500KHz to 2.5MHz Programmable delay between Vdd and Vpp to 250ms Programmable Vdd source programmer or target Vdd current limit 50 mA Prevents damage to connected microcontroller in case of power ON and power OFF 2/19/2015 Additional Information Softlog Production Quality In-Circuit Programmers Softlog production quality programmers can program up to 64 target boards simultaneously, and offer advanced features such as Secure Programming, DLL support, and High Current drive. Softlog has produced production quality programmers since Several models of Softlog programmers are available. All models program 8-bit devices, including PIC12C, PIC16C, PIC10F, PIC12F, PIC16 L F, PIC18F, PIC18F J , and PIC18F K . The following options are available: Option D DLL/Command Line Support for control by external programs or batch files Option P dsPIC/PIC24 Device Support Option S Security Support for strong encryption and to limit the number of devices programmed more information Option K Keeloq Support Option X PIC32 Support Microchip P/N TPG100001 TPG100002 TPG100004 TPG100005 TPG100006 TPG100007 TPG100008 TPG100009 TPG100010 Softlog P/N ICP2-DS ICP2GANGDP ICP2GANG ICP2GANGDS ICP2-DS ICP2 HC ICP2PORT-P Channels Battery Drive Capability Normal Normal Normal Normal Normal Normal High Base Base DLL/Command Line Support D dsPIC/PIC24 Support P Security Support S Note 1 Keeloq Support K and PIC32 Support X are not available for these models Note 2 Any support option D/P/S/K/X can be activated remotely. Upgrades for secure programming S are available from microchipDIRECT. For other options, contact Softlog Systems for details. Note 3 ICP2 programmers can be powered by USB, or by external power adapter included . ICP2GANG programmers are powered by external power adapter included . Note 4 ICP2PORT programmers can be powered by USB, batteries 3 type AAA , or external power adapter not included . Capabilities of High-Current Programmer The ICP2 HC model is designed for target boards with high current requirements: Parameter Microchip P/N TPG100001 Supply from USB VDD current, max VPP capacitive load, max VPP current, max Clock current, max Data current, max Softlog P/N ICP2 Yes VDD current is limited to 40mA 250mA recommended till 100mA 22nF 25mA 5mA due to in-series resistor 5mA due to in-series resistor Microchip P/N TPG100008 Softlog P/N ICP2 HC Not Available 1000mA 100nF 100mA

PDF Datasheet Preview

Softlog ICP2PORT-P Production Quality In-Circuit Service Programmer

Part Number TPG100010

The Softlog ICP2PORT-P Production Quality In-Circuit Service Programmer is specially designed to meet your service programming needs. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. Note All technical support and warranty service will be provided by Softlog. You can contact them at

Fast programming of 8-bit MCUs, 16-bit PIC MCUs and DSCs, and serial EEPROMs On-board 4MB flash memory for non-volatile storage of 6 environments Supports 3 serialization schemes sequential, random, and user file 1 to 8 bytes Vdd and Vpp overload protection protects programmer and devices to be programmed Power supply 3 AAA batteries, USB or power adapter Configurable counter allows control of the number of upgrades performed Programmable Vdd to 5.5V and Vpp to 13.5V Programmable clock/data speed 500KHz to 2.5MHz Programmable delay between Vdd and Vpp to 250ms Programmable Vdd source programmer or target Vdd current limit 50 mA Prevents damage to connected microcontroller in case of power ON and power OFF
2/19/2015

Additional Information

Softlog Production Quality In-Circuit Programmers

Softlog production quality programmers can program up to 64 target boards simultaneously, and offer advanced features such as Secure Programming, DLL support, and High Current drive. Softlog has produced production quality programmers since

Several models of Softlog programmers are available. All models program 8-bit devices, including PIC12C, PIC16C, PIC10F, PIC12F, PIC16 L F, PIC18F, PIC18F J , and PIC18F K . The following options are available:

Option D DLL/Command Line Support for control by external programs or batch files Option P dsPIC/PIC24 Device Support Option S Security Support for strong encryption and to limit the number of devices programmed more information Option K Keeloq Support Option X PIC32 Support

Microchip P/N TPG100001 TPG100002 TPG100004

TPG100005 TPG100006

TPG100007 TPG100008 TPG100009 TPG100010

Softlog P/N

ICP2-DS ICP2GANGDP ICP2GANG ICP2GANGDS ICP2-DS ICP2 HC ICP2PORT-P

Channels

Battery

Drive Capability

Normal

Normal

Normal

Normal

Normal

Normal

High

Base

Base

DLL/Command Line Support D
dsPIC/PIC24 Support P

Security Support S

Note 1 Keeloq Support K and PIC32 Support X are not available for these models

Note 2 Any support option D/P/S/K/X can be activated remotely. Upgrades for secure programming S are available from microchipDIRECT. For other options, contact Softlog Systems for details.

Note 3 ICP2 programmers can be powered by USB, or by external power adapter included . ICP2GANG programmers are powered by external power adapter included .

Note 4 ICP2PORT programmers can be powered by USB, batteries 3 type AAA , or external power adapter not included .

Capabilities of High-Current Programmer

The ICP2 HC model is designed for target boards with high current requirements:

Parameter

Microchip P/N TPG100001

Supply from USB VDD current, max VPP capacitive load, max VPP current, max Clock current, max Data current, max

Softlog P/N ICP2 Yes VDD current is limited to 40mA 250mA recommended till 100mA 22nF 25mA 5mA due to in-series resistor 5mA due to in-series resistor

Microchip P/N TPG100008 Softlog P/N ICP2 HC Not Available 1000mA 100nF 100mA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TPG100010 Datasheet file may be downloaded here without warranties.

Datasheet ID: TPG100010 648247