SST26VF016BAT-104I/SN

SST26VF016BAT-104I/SN Datasheet

SST26VF016B

Part	Datasheet
SST26VF016BAT-104I/SN	SST26VF016BAT-104I/SN (pdf)

Related Parts	Information
SST26VF016BA-104I/SN	SST26VF016BA-104I/SN
SST26VF016BA-104I/SM	SST26VF016BA-104I/SM
SST26VF016BA-104I/MF	SST26VF016BA-104I/MF
SST26VF016BAT-104I/MF	SST26VF016BAT-104I/MF
SST26VF016BAT-104I/SM	SST26VF016BAT-104I/SM

PDF Datasheet Preview
SST26VF016B 2.5V/3.0V 16 Mbit Serial Quad I/O SQI Flash Memory • Single Voltage Read and Write Operations - 2.7-3.6V or 2.3-3.6V • Serial Interface Architecture - Nibble-wide multiplexed I/O’s with SPI-like serial command structure - Mode 0 and Mode 3 - x1/x2/x4 Serial Peripheral Interface SPI Protocol • High Speed Clock Frequency - 2.7-2.6V 104 MHz max - 2.3-3.6V 80 MHz max • Burst Modes - Continuous linear burst - 8/16/32/64 Byte linear burst with wrap-around • Superior Reliability - Endurance 100,000 Cycles min - Greater than 100 years Data Retention • Low Power Consumption - Active Read current 15 mA typical 104 MHz - Standby Current 15 µA typical • Fast Erase Time - Sector/Block Erase 18 ms typ , 25 ms max - Chip Erase 35 ms typ , 50 ms max • Page-Program - 256 Bytes per page in x1 or x4 mode • End-of-Write Detection - Software polling the BUSY bit in status register • Flexible Erase Capability - Uniform 4 KByte sectors - Four 8 KByte top and bottom parameter overlay blocks - One 32 KByte top and bottom overlay blocks - Uniform 64 KByte overlay blocks • Write-Suspend - Suspend Program or Erase operation to access another block/sector • Software Reset RST mode • Software Write Protection - Individual-Block Write Protection with permanent lock-down capability - 64 KByte blocks, two 32 KByte blocks, and eight 8 KByte parameter blocks - Read Protection on top and bottom 8 KByte parameter blocks • Security ID - One-Time Programmable OTP 2 KByte, Secure ID - 64 bit unique, factory pre-programmed identifier - User-programmable area • Temperature Range - Industrial -40°C to +85°C - Extended -40°C to +105°C • Packages Available - 8-contact WDFN 6mm x 5mm - 8-lead SOIJ mm - 8-lead SOIC mm • All devices are RoHS compliant Product Description The Serial Quad I/O SQI family of flash-memory devices features a six-wire, 4-bit I/O interface that allows for low-power, high-performance operation in a low pin-count package. SST26VF016B also supports full command-set compatibility to traditional Serial Peripheral Interface SPI protocol. System designs using SQI flash devices occupy less board space and ultimately lower system costs. All members of the 26 Series, SQI family are manufactured with proprietary, high-performance CMOS technology. The split-gate cell design and thickoxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. SST26VF016B significantly improves performance and reliability, while lowering power consumption. These devices write Program or Erase with a single power supply of 2.3-3.6V. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. SST26VF016B is offered in 8-contact WDFN 6 mm x 5 mm , 8-lead SOIJ mm , and 8-lead SOIC mm . See Figures 2-1 through 2-3 for pin assignments. 2014-2015 Microchip Technology Inc. DS20005262C-page 1 SST26VF016B TO OUR VALUED CUSTOMERS It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via Email at We welcome your feedback. Most Current Data Sheet To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at: You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, e.g., is version A of document Errata Customer Notification System Register on our web site at to receive the most current information on all of our products. DS20005262C-page 2 2014-2015 Microchip Technology Inc. BLOCK DIAGRAM FIGURE 1-1: FUNCTIONAL BLOCK DIAGRAM • Business of Microchip Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives CUSTOMER CHANGE NOTIFICATION SERVICE CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels • Distributor or Representative • Local Sales Office • Field Application Engineer FAE • Technical Support Customers should contact their distributor, representative or Field Application Engineer FAE for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at: DS20005262C-page 56 2014-2015 Microchip Technology Inc. SST26VF016B PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office. X XXX Valid Combinations: Device Tape/Reel Operating Temperature Package Indicator Frequency Device: SST26VF016B = 16 Mbit, 2.5V/3.0V, SQI Flash Memory WP#/Hold# pin Enable at power-up Tape and Reel Flag: T blank = Tape and Reel = Tube or Tray Operating Frequency: = 104 MHz SST26VF016B-104I/SM SST26VF016BT-104I/SM SST26VF016B-104I/SN SST26VF016BT-104I/SN SST26VF016B-104I/MF SST26VF016BT-104I/MF SST26VF016B-104V/SM SST26VF016BT-104V/SM SST26VF016B-104V/SN SST26VF016BT-104V/SN SST26VF016B-104V/MF SST26VF016BT-104V/MF Temperature I V = -40°C to +85°C = -40°C to +105°C Package: = WDFN 6mm x 5mm Body , 8-lead = SOIJ mm Body , 8-lead = SOIC mm Body , 8-lead 2014-2015 Microchip Technology Inc. DS20005262C-page 57 SST26VF016B TABLE 11-1 SERIAL FLASH DISCOVERABLE PARAMETER SFDP 1 OF 16 Address Bit Address Data Comments SFDP Header 1st DWORD SFDP Header A7:A0 SFDP Signature

PDF Datasheet Preview

SST26VF016B
2.5V/3.0V 16 Mbit Serial Quad I/O SQI Flash Memory
• Single Voltage Read and Write Operations - 2.7-3.6V or 2.3-3.6V
• Serial Interface Architecture - Nibble-wide multiplexed I/O’s with SPI-like serial command structure - Mode 0 and Mode 3 - x1/x2/x4 Serial Peripheral Interface SPI Protocol
• High Speed Clock Frequency - 2.7-2.6V 104 MHz max - 2.3-3.6V 80 MHz max
• Burst Modes - Continuous linear burst - 8/16/32/64 Byte linear burst with wrap-around
• Superior Reliability - Endurance 100,000 Cycles min - Greater than 100 years Data Retention
• Low Power Consumption - Active Read current 15 mA typical 104 MHz - Standby Current 15 µA typical
• Fast Erase Time - Sector/Block Erase 18 ms typ , 25 ms max - Chip Erase 35 ms typ , 50 ms max
• Page-Program - 256 Bytes per page in x1 or x4 mode
• End-of-Write Detection - Software polling the BUSY bit in status register
• Flexible Erase Capability - Uniform 4 KByte sectors - Four 8 KByte top and bottom parameter overlay blocks - One 32 KByte top and bottom overlay blocks - Uniform 64 KByte overlay blocks
• Write-Suspend - Suspend Program or Erase operation to access another block/sector
• Software Reset RST mode
• Software Write Protection
- Individual-Block Write Protection with permanent lock-down capability - 64 KByte blocks, two 32 KByte blocks, and eight 8 KByte parameter blocks
- Read Protection on top and bottom 8 KByte parameter blocks
• Security ID - One-Time Programmable OTP 2 KByte, Secure ID - 64 bit unique, factory pre-programmed identifier - User-programmable area
• Temperature Range - Industrial -40°C to +85°C - Extended -40°C to +105°C
• Packages Available - 8-contact WDFN 6mm x 5mm - 8-lead SOIJ mm - 8-lead SOIC mm
• All devices are RoHS compliant

Product Description

The Serial Quad I/O SQI family of flash-memory devices features a six-wire, 4-bit I/O interface that allows for low-power, high-performance operation in a low pin-count package. SST26VF016B also supports full command-set compatibility to traditional Serial Peripheral Interface SPI protocol. System designs using SQI flash devices occupy less board space and ultimately lower system costs.

All members of the 26 Series, SQI family are manufactured with proprietary, high-performance CMOS technology. The split-gate cell design and thickoxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

SST26VF016B significantly improves performance and reliability, while lowering power consumption. These devices write Program or Erase with a single power supply of 2.3-3.6V. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.

SST26VF016B is offered in 8-contact WDFN 6 mm x 5 mm , 8-lead SOIJ mm , and 8-lead SOIC mm . See Figures 2-1 through 2-3 for pin assignments.
2014-2015 Microchip Technology Inc.

DS20005262C-page 1

SST26VF016B

TO OUR VALUED CUSTOMERS

It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and enhanced as new volumes and updates are introduced. If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via Email at We welcome your feedback.

Most Current Data Sheet

To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:

You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page. The last character of the literature number is the version number, e.g., is version A of document

Errata

Customer Notification System

Register on our web site at to receive the most current information on all of our products.

DS20005262C-page 2
2014-2015 Microchip Technology Inc.

BLOCK DIAGRAM

FIGURE 1-1:

FUNCTIONAL BLOCK DIAGRAM
• Business of Microchip Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives

CUSTOMER CHANGE NOTIFICATION SERVICE

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels
• Distributor or Representative
• Local Sales Office
• Field Application Engineer FAE
• Technical Support

Customers should contact their distributor, representative or Field Application Engineer FAE for support. Local sales offices are also available to help customers. A listing of sales offices and locations is included in the back of this document. Technical support is available through the web site at:

DS20005262C-page 56
2014-2015 Microchip Technology Inc.

SST26VF016B

PRODUCT IDENTIFICATION SYSTEM

To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.

X XXX

Valid Combinations:

Device Tape/Reel Operating Temperature Package Indicator Frequency

Device:

SST26VF016B = 16 Mbit, 2.5V/3.0V, SQI Flash Memory WP#/Hold# pin Enable at power-up

Tape and Reel Flag:

T blank
= Tape and Reel = Tube or Tray

Operating

Frequency:
= 104 MHz

SST26VF016B-104I/SM SST26VF016BT-104I/SM SST26VF016B-104I/SN SST26VF016BT-104I/SN SST26VF016B-104I/MF SST26VF016BT-104I/MF

SST26VF016B-104V/SM SST26VF016BT-104V/SM SST26VF016B-104V/SN SST26VF016BT-104V/SN SST26VF016B-104V/MF SST26VF016BT-104V/MF

Temperature I V
= -40°C to +85°C = -40°C to +105°C

Package:
= WDFN 6mm x 5mm Body , 8-lead = SOIJ mm Body , 8-lead = SOIC mm Body , 8-lead
2014-2015 Microchip Technology Inc.

DS20005262C-page 57

SST26VF016B

TABLE 11-1 SERIAL FLASH DISCOVERABLE PARAMETER SFDP 1 OF 16

Address Bit Address

Data

Comments

SFDP Header 1st DWORD

SFDP Header

A7:A0

SFDP Signature

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SST26VF016BAT-104I/SN Datasheet file may be downloaded here without warranties.

Datasheet ID: SST26VF016BAT-104I/SN 648209