LAN91C96I-MS

LAN91C96I-MS Datasheet

LAN91C96i

Part	Datasheet
LAN91C96I-MS	LAN91C96I-MS (pdf)

Related Parts	Information
LAN91C96I-MU	LAN91C96I-MU

PDF Datasheet Preview
LAN91C96i Non-PCI Single-Chip Full Duplex Ethernet Controller Product Features Non-PCI Single-Chip Ethernet Controller Fully Supports Full Duplex Switched Ethernet Supports Enhanced Transmit Queue Management 6K Bytes of On-Chip RAM Supports IEEE ANSI 8802-3 Ethernet Technology Hardware Memory Management Unit Optional Configuration via Serial EEPROM Interface Jumperless Supports single 5V or 3.3V VCC Design Industrial temperature range of to 85°C Supports Mixed Voltage External PHY Designs Low Power CMOS Design 100 Pin QFP and TQFP Lead-Free RoHS Compliant Packages 1.0mm body Thickness Pin Compatible with the LAN91C92 and LAN91C94 Bus Interface Direct Interface to Local Bus, with No Wait States Flexible Bus Interface 16 Bit Data and Control Paths Fast Access Time Pipelined Data Path Handles Block Word Transfers for any Alignment High Performance Chained "Back-to-Back" Transmit and Receive Data Brief Pin Compatible with the LAN91C92 and the LAN91C94 in Local Bus Mode Dynamic Memory Allocation Between Transmit and Receive Flat Memory Structure for Low CPU Overhead Buffered Architecture, Insensitive to Bus Latencies No Overruns/Underruns Supports Boot PROM for Diskless Local Bus Network Interface Integrated 10BASE-T Transceiver Functions: - Driver and Receiver - Link Integrity Test - Receive Polarity Detection and Correction Integrated AUI Interface 10 Mb/s Manchester Encoding/Decoding and Clock Recovery Automatic Retransmission, Bad Packet Rejection, and Transmit Padding External and Internal Loopback Modes Four Direct Driven LEDs for Status/ Diagnostics Software Drivers LAN9000 Drivers for Major Network Operating Systems Utilizing Local Bus Interface Software Drivers Compatible with the LAN91C92, LAN91C94, LAN91C100FD 100 Mb/s , and LAN91C110 100 Mb/s Controllers in Local Bus Mode Software Drivers Utilize Full Capability of 32 Bit Microprocessor SMSC LAN91C96i PRODUCT PREVIEW Non-PCI Single-Chip Full Duplex Ethernet Controller ORDER NUMBERS: LAN91C96i-MU for 100 pin, TQFP Lead-Free RoHS Compliant package LAN91C96i-MS for 100 pin, QFP Lead-Free RoHS Compliant package 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 631 435-6000, FAX 631 273-3123 Copyright 2008 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order the "Terms of Sale Agreement" . The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at SMSC is a registered trademark of Standard Microsystems Corporation “SMSC” . Product names and company names are the trademarks of their respective holders. PRODUCT PREVIEW SMSC LAN91C96i Non-PCI Single-Chip Full Duplex Ethernet Controller The LAN91C96i is a VLSI Ethernet Controller that combines Local Bus interfaces in one chip. LAN91C96i integrates all MAC and physical layer functions, as well as the packet RAM, needed to implement a high performance 10BASE-T twisted pair node. For 10BASE5 thick coax , 10BASE2 thin coax , and 10BASE-F fiber implementations, the LAN91C96i interfaces to external transceivers via the provided AUI port. Only one additional IC is required for most applications. The LAN91C96i comes with Full Duplex Switched Ethernet FDSWE support allowing the controller to provide much higher throughput. 6K bytes of RAM is provided to support enhanced throughput and compensate for any increased system service latencies. The controller implements multiple advanced powerdown modes including Magic Packet to conserve power and operate more efficiently. The LAN91C96i can directly interface with the Local Bus and deliver no-wait-state operation. For Local Bus interfaces, the LAN91C96i occupies 16 I/0 locations and no memory space. The same I/O space is used for Local Bus operations. Its shared memory is sequentially accessed with 40ns access times to any of its registers, including its packet memory. DMA services are not used by the LAN91C96i, virtually decoupling network traffic from local or system bus utilization. For packet memory management, the LAN91C96i integrates a unique hardware Memory Management Unit MMU with enhanced performance and decreased software overhead when compared to ring buffer and linked list architectures. The LAN91C96i is portable to different CPU and bus platforms due to its flexible bus interface, flat memory structure no pointers , and its loosely coupled buffered architecture not sensitive to latency . The LAN91C96i is available in 100-pin QFP and TQFP mm body thickness packages green, leadfree packages are also available. The low profile TQFP is ideal for mobile applications such as PC Card LAN adapters. The LAN91C96i operates with a single power supply voltage of 5V or 3.3V. The industrial temperature range for LAN91C96i is to 85°C.

PDF Datasheet Preview

LAN91C96i

Non-PCI Single-Chip Full Duplex Ethernet Controller

Product Features

Non-PCI Single-Chip Ethernet Controller Fully Supports Full Duplex Switched Ethernet Supports Enhanced Transmit Queue

Management 6K Bytes of On-Chip RAM Supports IEEE ANSI 8802-3 Ethernet

Technology Hardware Memory Management Unit Optional Configuration via Serial EEPROM

Interface Jumperless Supports single 5V or 3.3V VCC Design Industrial temperature range of to 85°C Supports Mixed Voltage External PHY Designs Low Power CMOS Design 100 Pin QFP and TQFP Lead-Free RoHS

Compliant Packages 1.0mm body Thickness Pin Compatible with the LAN91C92 and

LAN91C94

Bus Interface

Direct Interface to Local Bus, with No Wait States Flexible Bus Interface 16 Bit Data and Control Paths Fast Access Time Pipelined Data Path Handles Block Word Transfers for any Alignment High Performance Chained "Back-to-Back"

Transmit and Receive

Data Brief

Pin Compatible with the LAN91C92 and the LAN91C94 in Local Bus Mode

Dynamic Memory Allocation Between Transmit and Receive

Flat Memory Structure for Low CPU Overhead Buffered Architecture, Insensitive to Bus

Latencies No Overruns/Underruns Supports Boot PROM for Diskless Local Bus

Network Interface

Integrated 10BASE-T Transceiver Functions:
- Driver and Receiver - Link Integrity Test - Receive Polarity Detection and Correction

Integrated AUI Interface 10 Mb/s Manchester Encoding/Decoding and

Clock Recovery Automatic Retransmission, Bad Packet

Rejection, and Transmit Padding External and Internal Loopback Modes Four Direct Driven LEDs for Status/ Diagnostics

Software Drivers

LAN9000 Drivers for Major Network Operating Systems Utilizing Local Bus Interface

Software Drivers Compatible with the LAN91C92, LAN91C94, LAN91C100FD 100 Mb/s , and LAN91C110 100 Mb/s Controllers in Local Bus Mode

Software Drivers Utilize Full Capability of 32 Bit Microprocessor

SMSC LAN91C96i

PRODUCT PREVIEW

Non-PCI Single-Chip Full Duplex Ethernet Controller

ORDER NUMBERS:

LAN91C96i-MU for 100 pin, TQFP Lead-Free RoHS Compliant package LAN91C96i-MS for 100 pin, QFP Lead-Free RoHS Compliant package
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 631 435-6000, FAX 631 273-3123

Copyright 2008 SMSC or its subsidiaries. All rights reserved.

Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order the "Terms of Sale Agreement" . The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at SMSC is a registered trademark of Standard Microsystems Corporation “SMSC” . Product names and company names are the trademarks of their respective holders.

PRODUCT PREVIEW

SMSC LAN91C96i

Non-PCI Single-Chip Full Duplex Ethernet Controller

The LAN91C96i is a VLSI Ethernet Controller that combines Local Bus interfaces in one chip. LAN91C96i integrates all MAC and physical layer functions, as well as the packet RAM, needed to implement a high performance 10BASE-T twisted pair node. For 10BASE5 thick coax , 10BASE2 thin coax , and 10BASE-F fiber implementations, the LAN91C96i interfaces to external transceivers via the provided AUI port. Only one additional IC is required for most applications. The LAN91C96i comes with Full Duplex Switched Ethernet FDSWE support allowing the controller to provide much higher throughput. 6K bytes of RAM is provided to support enhanced throughput and compensate for any increased system service latencies. The controller implements multiple advanced powerdown modes including Magic Packet to conserve power and operate more efficiently. The LAN91C96i can directly interface with the Local Bus and deliver no-wait-state operation. For Local Bus interfaces, the LAN91C96i occupies 16 I/0 locations and no memory space.

The same I/O space is used for Local Bus operations. Its shared memory is sequentially accessed with 40ns access times to any of its registers, including its packet memory. DMA services are not used by the LAN91C96i, virtually decoupling network traffic from local or system bus utilization. For packet memory management, the LAN91C96i integrates a unique hardware Memory Management Unit MMU with enhanced performance and decreased software overhead when compared to ring buffer and linked list architectures. The LAN91C96i is portable to different CPU and bus platforms due to its flexible bus interface, flat memory structure no pointers , and its loosely coupled buffered architecture not sensitive to latency .

The LAN91C96i is available in 100-pin QFP and TQFP mm body thickness packages green, leadfree packages are also available. The low profile TQFP is ideal for mobile applications such as PC Card LAN adapters. The LAN91C96i operates with a single power supply voltage of 5V or 3.3V. The industrial temperature range for LAN91C96i is to 85°C.

More datasheets: M25PE40-VMC6G | 76650-0038 | TXM-433-RM | TXM-418-RM | DDMY-50S-A197 | MOC3023 | MOC3021 | MOC3022.300 | MOC3022 | USB2005-MV-01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LAN91C96I-MS Datasheet file may be downloaded here without warranties.

Datasheet ID: LAN91C96I-MS 648122