USB2005-MV-01

USB2005-MV-01 Datasheet

USB2005

Part	Datasheet
USB2005-MV-01	USB2005-MV-01 (pdf)

PDF Datasheet Preview
USB2005 USB ATA/ATAPI Controller with PD-DRM PRODUCT FEATURES Datasheet - Provides support for digital rights management for portable devices PD-DRM via Mass Storage Class SCSI Inquiry command as specified by Microsoft for Windows Media Systems WM-DRM . Reports all media as Removable HDDs only . - Volt, Low Power Core Operation - Volt I/O with 5V input tolerance - Supports a low-cost single 3.3V regulator design, by using a 1N4001 diode to provide the 2.5V core voltage from the 3.3V supply - Complete USB Specification Compatibility Includes USB Transceiver A Bi-directional Control and a Bi-directional Bulk Endpoint are provided. - Complete System Solution for interfacing ATA or ATAPI devices to USB bus Supports USB Mass Storage Compliant Bootable BIOS Supports ATA6 Drive capacities up to 2048GB True UDMA Mode 4 transfer rates Support for ATAPI Devices: CD-ROM CD-R CD-RW DVD/R/W - Support for sharing ATA/ATAPI drive with external microprocessor for file playback in portable media player applications Pin indication of USB bus SUSPEND state Control pin to force drive interface high impedance state for drive sharing - 8051 8 bit microprocessor Provides low speed control functions 30 Mhz execution speed at 4 cycles per instruction average 768 Bytes of internal SRAM for general purpose scratchpad or program execution while re-flashing external ROM - Double Buffered Bulk Endpoint Bi-directional 512 Byte Buffer for Bulk Endpoint 64 Byte RX Control Endpoint Buffer 64 Byte TX Control Endpoint Buffer - Internal or External Program Memory Interface 48K Byte Internal ROM or optional 64K Byte External Code Space using Flash, SRAM, or EPROM Memory - On Board 12Mhz Crystal Driver Circuit - Internal PLL for 480Mhz USB Sampling, 30Mhz MCU clock, and 60Mhz ATA clock - Supports firmware upgrade via USB bus if "boot block" Flash program memory is used for optional external program memory - Optional Serial EEPROM interface for VID/PID/Serial Number Customization - 100 Pin, STQFP Lead-free RoHS Compliant Package 12x12x1.4mm body, 14x14mm footprint SMSC USB2005 DATASHEET USB ATA/ATAPI Controller with PD-DRM Datasheet ORDER NUMBER USB2005-MV-01 FOR 100 PIN, STQFP LEAD-FREE ROHS COMPLIANT PACKAGE 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 631 435-6000, FAX 631 273-3123 Copyright 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order the "Terms of Sale Agreement" . The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at SMSC is a registered trademark of Standard Microsystems Corporation “SMSC” . Product names and company names are the trademarks of their respective holders. DATASHEET SMSC USB2005 USB ATA/ATAPI Controller with PD-DRM Datasheet Table of Contents

PDF Datasheet Preview

USB2005

USB ATA/ATAPI Controller with PD-DRM

PRODUCT FEATURES

Datasheet
- Provides support for digital rights management for portable devices PD-DRM via Mass Storage Class SCSI Inquiry command as specified by Microsoft for Windows Media Systems WM-DRM . Reports all media as Removable HDDs only .
- Volt, Low Power Core Operation
- Volt I/O with 5V input tolerance
- Supports a low-cost single 3.3V regulator design, by using a 1N4001 diode to provide the 2.5V core voltage from the 3.3V supply
- Complete USB Specification Compatibility

Includes USB Transceiver A Bi-directional Control and a Bi-directional Bulk

Endpoint are provided.
- Complete System Solution for interfacing ATA or ATAPI devices to USB bus

Supports USB Mass Storage Compliant Bootable BIOS Supports ATA6 Drive capacities up to 2048GB True UDMA Mode 4 transfer rates Support for ATAPI Devices:

CD-ROM CD-R CD-RW DVD/R/W
- Support for sharing ATA/ATAPI drive with external microprocessor for file playback in portable media player applications

Pin indication of USB bus SUSPEND state Control pin to force drive interface high impedance
state for drive sharing
- 8051 8 bit microprocessor

Provides low speed control functions 30 Mhz execution speed at 4 cycles per instruction
average 768 Bytes of internal SRAM for general purpose
scratchpad or program execution while re-flashing external ROM
- Double Buffered Bulk Endpoint

Bi-directional 512 Byte Buffer for Bulk Endpoint 64 Byte RX Control Endpoint Buffer 64 Byte TX Control Endpoint Buffer
- Internal or External Program Memory Interface
48K Byte Internal ROM or optional 64K Byte External Code Space using Flash, SRAM, or EPROM Memory
- On Board 12Mhz Crystal Driver Circuit
- Internal PLL for 480Mhz USB Sampling, 30Mhz MCU clock, and 60Mhz ATA clock
- Supports firmware upgrade via USB bus if "boot block" Flash program memory is used for optional external program memory
- Optional Serial EEPROM interface for VID/PID/Serial Number Customization
- 100 Pin, STQFP Lead-free RoHS Compliant Package 12x12x1.4mm body, 14x14mm footprint

SMSC USB2005

DATASHEET

USB ATA/ATAPI Controller with PD-DRM Datasheet

ORDER NUMBER USB2005-MV-01 FOR 100 PIN, STQFP LEAD-FREE ROHS COMPLIANT PACKAGE
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 631 435-6000, FAX 631 273-3123

Copyright 2007 SMSC or its subsidiaries. All rights reserved.

Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order the "Terms of Sale Agreement" . The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at SMSC is a registered trademark of Standard Microsystems Corporation “SMSC” . Product names and company names are the trademarks of their respective holders.

DATASHEET

SMSC USB2005

USB ATA/ATAPI Controller with PD-DRM Datasheet

Table of Contents

More datasheets: DDMY24W7PA101 | M25PE40-VMC6G | 76650-0038 | TXM-433-RM | TXM-418-RM | DDMY-50S-A197 | MOC3023 | MOC3021 | MOC3022.300 | MOC3022

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived USB2005-MV-01 Datasheet file may be downloaded here without warranties.

Datasheet ID: USB2005-MV-01 648261