SY100EP56VK4C

SY100EP56VK4C Datasheet

ECL Pro SY100EP56V

Part	Datasheet
SY100EP56VK4C	SY100EP56VK4C (pdf)

PDF Datasheet Preview
3.3V/5V PECL/ECL 3GHz DUAL DIFFERENTIAL 2:1 MULTIPLEXER ECL Pro SY100EP56V FINAL s Dual, fully differential 2:1 PECL/ECL multiplexer s Guaranteed AC parameters over temperature/ voltage • > 3GHz fMAX toggle • < 100ps within device skew • < 230ps rise/fall times • < 500ps propagation delay s Flexible power supply 3.0V to 5.5V s Wide operating temperature range to +85°C s VBB reference for AC-coupled and single-ended applications s Both channels have independent input select or common select control s 100k PECL/ECL compatible logic s Available in 20-pin TSSOP package PIN CONFIGURATION/BLOCK DIAGRAM D0a 1 /D0a 2 VBB0 3 D0b 4 /D0b 5 D1a 6 /D1a 7 VBB1 8 D1b 9 /D1b 10 20 VCC 1 19 Q0 18 /Q0 0 17 SEL0 16 COM_SEL 15 SEL1 14 VCC 13 Q1 0 12 /Q1 11 VEE ECL Pro The SY100EP56V is a high-speed, low-skew, fully differential Dual PECL/ECL 2:1 multiplexer. This device is a pin-for-pin, plug-in replacement to the MC10/100EP56DT. Two separate 2:1 multiplexers Channel 0 and Channel 1 with dedicated select control pins SEL0 and SEL1 are implemented in a 20-pin TSSOP package. The signal-path inputs D0a, D0b and D1a, D1b accept differential signals as low as 150mV pk-pk. For applications that require common select control for both channels A & B, a common select pin COM_SEL is available. All I/O pins are 100k PECL/ECL logic compatible. is guaranteed over the industrial to +85°C temperature range and 3.0V to 5.5V supply voltage range. This device will operate in PECL/LVPECL or ECL/ LVECL mode. The 500ps max 400 typ propagation delay is matched for all signal and logic select paths D-to-QOUT, SEL-to-QOUT, and COM_SEL-to-QOUT. Two VBB output reference pins approx equal to VCC are available for or single-ended applications. The SY100EP56V is part of Micrel’s high-speed, Precision Edge timing and distribution family. For applications that require a different I/O combination, consult the Micrel website at and choose from a comprehensive product line of high-speed, low skew fanout buffers, translators, and clock dividers. CROSS REFERENCE TABLE Micrel Semiconductor SY100EP56VK4I SY100EP56VK4ITR ON Semiconductor MC100EP56DT MC100EP56DTR2 20-pin TSSOP Package ECL Pro is a trademark of Micrel, Inc. 1 Amendment /0 Issue Date March 2003 Micrel PIN DESCRIPTION ECL Pro SY100EP56V D0a, /D0a D0b, /D0b Pin Number 1, 2, 4, 5 D1a, /D1a D1b, /D1b 6, 7 9, 10 VBB0, VBB1 VEE /Q1, Q1 11 12, 13 SEL1, SEL0 15, 17 PRODUCT ORDERING CODE Ordering Code Package Operating Package Type Range Marking SY100EP56VK4C K4-20-1 Commercial XEP56V SY100EP56VK4CTR 1 K4-20-1 Commercial XEP56V Note Tape and Reel. Note Recommended for new designs. Ordering Code Package Type SY100EP56VK4I 2 K4-20-1 SY100EP56VK4ITR 1, 2 K4-20-1 Operating Range Industrial Industrial Package Marking XEP56V XEP56V Output Swing 200mV/div. Output Swing 200mV/div. OUTPUT AMPLITUDE mV 500 1000 1500 2000 2500 3000 3500 4000 PROPAGATION DELAY ps -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Micrel TYPICAL OPERATING CHARACTERISTICS VCC = 3.3V, VEE = GND, TA = 25°C, unless otherwise stated. Output Amplitude vs. Frequency 900 800 700 600 500 400 300 TA = 25°C 200 VCC = 3.3V 100 VIN = 800mV FREQUENCY MHz TA = 25°C VCC = 3.3V VEE GND VIN = 800mV 500MHz Output ECL Pro SY100EP56V Propagation Delay vs. Temperature 350 TA = 25°C VCC = 3.3V VIN = 800mV TEMPERATURE °C TA = 25°C VCC = 3.3V VEE GND VIN = 800mV 1.5GHz Output TIME 300ps/div. TA = 25°C VCC = 3.3V VEE GND VIN = 800mV 2.5GHz Output TIME 100ps/div. 3.0GHz Output TA = 25°C VCC = 3.3V VEE GND VIN = 800mV /Q Output Swing 200mV/div. Output Swing 200mV/div. TIME 60ps/div. TIME 55ps/div. Micrel

PDF Datasheet Preview

3.3V/5V PECL/ECL 3GHz DUAL DIFFERENTIAL 2:1 MULTIPLEXER

ECL Pro SY100EP56V

FINAL
s Dual, fully differential 2:1 PECL/ECL multiplexer s Guaranteed AC parameters over temperature/
voltage
• > 3GHz fMAX toggle
• < 100ps within device skew
• < 230ps rise/fall times
• < 500ps propagation delay s Flexible power supply 3.0V to 5.5V s Wide operating temperature range to +85°C s VBB reference for AC-coupled and single-ended applications s Both channels have independent input select or common select control s 100k PECL/ECL compatible logic s Available in 20-pin TSSOP package

PIN CONFIGURATION/BLOCK DIAGRAM

D0a 1 /D0a 2 VBB0 3 D0b 4 /D0b 5 D1a 6 /D1a 7 VBB1 8 D1b 9 /D1b 10
20 VCC 1
19 Q0
18 /Q0 0
17 SEL0
16 COM_SEL
15 SEL1
14 VCC
13 Q1
0 12 /Q1
11 VEE

ECL Pro

The SY100EP56V is a high-speed, low-skew, fully differential Dual PECL/ECL 2:1 multiplexer. This device is a pin-for-pin, plug-in replacement to the MC10/100EP56DT. Two separate 2:1 multiplexers Channel 0 and Channel 1 with dedicated select control pins SEL0 and SEL1 are implemented in a 20-pin TSSOP package. The signal-path inputs D0a, D0b and D1a, D1b accept differential signals as low as 150mV pk-pk. For applications that require common select control for both channels A & B, a common select pin COM_SEL is available. All I/O pins are 100k PECL/ECL logic compatible.
is guaranteed over the industrial to +85°C temperature range and 3.0V to 5.5V supply voltage range. This device will operate in PECL/LVPECL or ECL/ LVECL mode. The 500ps max 400 typ propagation delay is matched for all signal and logic select paths D-to-QOUT, SEL-to-QOUT, and COM_SEL-to-QOUT. Two VBB output reference pins approx equal to VCC are available for or single-ended applications.

The SY100EP56V is part of Micrel’s high-speed, Precision Edge timing and distribution family. For applications that require a different I/O combination, consult the Micrel website at and choose from a comprehensive product line of high-speed, low skew fanout buffers, translators, and clock dividers.

CROSS REFERENCE TABLE

Micrel Semiconductor SY100EP56VK4I SY100EP56VK4ITR

ON Semiconductor MC100EP56DT MC100EP56DTR2
20-pin TSSOP Package

ECL Pro is a trademark of Micrel, Inc. 1

Amendment /0

Issue Date March 2003

Micrel

PIN DESCRIPTION

ECL Pro SY100EP56V

D0a, /D0a D0b, /D0b

Pin Number
1, 2, 4, 5

D1a, /D1a D1b, /D1b
6, 7 9, 10

VBB0, VBB1

VEE /Q1, Q1
11 12, 13

SEL1, SEL0
15, 17
PRODUCT ORDERING CODE
Ordering Code

Package Operating Package

Type

Range Marking

SY100EP56VK4C

K4-20-1 Commercial XEP56V

SY100EP56VK4CTR 1 K4-20-1 Commercial XEP56V

Note Tape and Reel. Note Recommended for new designs.
Ordering Code

Package Type

SY100EP56VK4I 2

K4-20-1

SY100EP56VK4ITR 1, 2 K4-20-1

Operating Range

Industrial

Industrial

Package Marking

XEP56V

XEP56V

Output Swing 200mV/div. Output Swing 200mV/div.

OUTPUT AMPLITUDE mV 500 1000 1500 2000 2500 3000 3500 4000

PROPAGATION DELAY ps -40 -30 -20 -10
0 10 20 30 40 50 60 70 80 90

Micrel

TYPICAL OPERATING CHARACTERISTICS

VCC = 3.3V, VEE = GND, TA = 25°C, unless otherwise stated.

Output Amplitude vs. Frequency
900 800 700 600 500 400 300 TA = 25°C 200 VCC = 3.3V 100 VIN = 800mV

FREQUENCY MHz

TA = 25°C VCC = 3.3V VEE GND VIN = 800mV
500MHz Output

ECL Pro SY100EP56V

Propagation Delay
vs. Temperature
350 TA = 25°C

VCC = 3.3V VIN = 800mV

TEMPERATURE °C

TA = 25°C VCC = 3.3V VEE GND VIN = 800mV
1.5GHz Output

TIME 300ps/div.

TA = 25°C VCC = 3.3V VEE GND VIN = 800mV
2.5GHz Output

TIME 100ps/div.
3.0GHz Output

TA = 25°C VCC = 3.3V VEE GND VIN = 800mV /Q

Output Swing 200mV/div. Output Swing 200mV/div.

TIME 60ps/div.

TIME 55ps/div.

Micrel

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SY100EP56VK4C Datasheet file may be downloaded here without warranties.

Datasheet ID: SY100EP56VK4C 647926