U6813B-MFPG3Y

U6813B-MFPG3Y Datasheet

The U6812B is a bipolar monolithic K-line bus transceiver designed to provide bi-directional serial communication in automotive diagnostic applications. The standard K-line is ISO 9141 compatible for baud rates up to 250 kBaud.

Part	Datasheet
U6813B-MFPG3Y	U6813B-MFPG3Y (pdf)

Related Parts	Information
U6812B-MFPG3	U6812B-MFPG3

PDF Datasheet Preview
• Wide Power Supply Voltage Range • Short-circuit Protected K-interface, ISO9141 Compatible • Three Short-circuit Protected 40-mA Open-collector Buffers • All Low-power Outputs with Built-in 28-V Clamping • CMOS Compatible Digital Inputs with Hysteresis • Digital 1-mA Push-pull “RxD” K-line Output • Channel-specific Over-temperature Switch Off in Event of Short Circuit • Load-dump Protection and Interference Protection According to ISO 7637-1/4 DIN 40839 The U6812B is a bipolar monolithic K-line bus transceiver designed to provide bi-directional serial communication in automotive diagnostic applications. The standard K-line is ISO 9141 compatible for baud rates up to 250 kBaud. The IC provides three universally applicable 40-mA open-collector buffers, that can be used for signal decoupling. The U6812B is manufactured using Atmel’s bipolar process and fully complies to automotive industry specifications.The U6812B provides an ideal grouping of SO-packaged low-power drivers, thus meeting customers’ demand for space-saving and cost-effective circuit board assembly. Figure Block Diagram Single-ended Bus Transceiver with Triple Buffer U6812B K-diagnosis ISO 9141 VS/2 VCC/2 VCC/2 DIS IN 3 Temperature control K GND OUT 1 GND OUT 2 GND OUT 3 GND Pin Configuration Figure Pinning SO16 GND 1 OUT 2 VCC 5 OUT 3 7 GND 8 U6812B 16 GND 15 K 14 TXD 13 RXD 12 VS 11 IN 1 10 OUT 1 9 GND Table Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin Description Type Supply OUT 2 Open-collector output Digital input Digital input Supply Digital input OUT 3 Open-collector output Supply Supply OUT 1 Open-collector output Ordering Information Extended Type Number U6812B-MFPG3Y Package Information Package SO16 Remarks Taped and reeled, Pb-free Package SO16 Dimensions in mm U6812B technical drawings according to DIN specifications History 4760B-AUTO-10/05 • Put datasheet in a new template • Pb-free logo on page 1 added • Table “Ordering Information” on page 9 changed Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel 41 26-426-5555 Fax 41 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel 33 2-40-18-18-18 Fax 33 2-40-18-19-60 ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France Tel 33 4-42-53-60-00 Fax 33 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel 44 1355-803-000 Fax 44 1355-242-743 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel 49 71-31-67-0 Fax 49 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel 33 4-76-58-30-00 Fax 33 4-76-58-34-80 Literature Requests Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. Atmel Corporation All rights reserved. logo and combinations thereof, Everywhere You and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Printed on recycled paper.

PDF Datasheet Preview

• Wide Power Supply Voltage Range
• Short-circuit Protected K-interface, ISO9141 Compatible
• Three Short-circuit Protected 40-mA Open-collector Buffers
• All Low-power Outputs with Built-in 28-V Clamping
• CMOS Compatible Digital Inputs with Hysteresis
• Digital 1-mA Push-pull “RxD” K-line Output
• Channel-specific Over-temperature Switch Off in Event of Short Circuit
• Load-dump Protection and Interference Protection

According to ISO 7637-1/4 DIN 40839

The U6812B is a bipolar monolithic K-line bus transceiver designed to provide bi-directional serial communication in automotive diagnostic applications. The standard K-line is ISO 9141 compatible for baud rates up to 250 kBaud.

The IC provides three universally applicable 40-mA open-collector buffers, that can be used for signal decoupling. The U6812B is manufactured using Atmel’s bipolar process and fully complies to automotive industry specifications.The U6812B provides an ideal grouping of SO-packaged low-power drivers, thus meeting customers’ demand for space-saving and cost-effective circuit board assembly.

Figure Block Diagram

Single-ended Bus Transceiver with Triple Buffer

U6812B

K-diagnosis ISO 9141

VS/2

VCC/2

VCC/2

DIS IN 3

Temperature
control

K GND

OUT 1 GND OUT 2 GND OUT 3 GND

Pin Configuration

Figure Pinning SO16

GND 1

OUT 2

VCC 5

OUT 3 7

GND 8

U6812B
16 GND 15 K 14 TXD 13 RXD 12 VS 11 IN 1 10 OUT 1 9 GND

Table Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pin Description

Type

Supply

OUT 2

Open-collector output

Digital input

Digital input

Supply

Digital input

OUT 3

Open-collector output

Supply

Supply

OUT 1

Open-collector output
Ordering Information

Extended Type Number U6812B-MFPG3Y

Package Information

Package SO16

Remarks Taped and reeled, Pb-free

Package SO16

Dimensions in mm

U6812B
technical drawings according to DIN specifications

History
4760B-AUTO-10/05
• Put datasheet in a new template
• Pb-free logo on page 1 added
• Table “Ordering Information” on page 9 changed

Atmel Corporation
2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 487-2600

Regional Headquarters

Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel 41 26-426-5555 Fax 41 26-426-5500

Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369

Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581

Atmel Operations

Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314

Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314

La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel 33 2-40-18-18-18 Fax 33 2-40-18-19-60

ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France Tel 33 4-42-53-60-00 Fax 33 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759

Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel 44 1355-803-000 Fax 44 1355-242-743

RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel 49 71-31-67-0 Fax 49 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759

Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom

Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel 33 4-76-58-30-00 Fax 33 4-76-58-34-80

Literature Requests

Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

Atmel Corporation All rights reserved. logo and combinations thereof, Everywhere You and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Printed on recycled paper.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived U6813B-MFPG3Y Datasheet file may be downloaded here without warranties.

Datasheet ID: U6813B-MFPG3Y 519522