94830

94830 Datasheet

Part	Datasheet
94830	94830 (pdf)

PDF Datasheet Preview
Specialty Terminals 73F-250-32-NB Female Disconnect, Nylon Insulated with Insulation Grip, Interlock Barrel Data Sheet Product Number Wire Range AWG 73F-250-32-NB 12-10 Mates with Male Tab Width W' x Thickness Maximum Barrel Insulation Length I.D. Diameter UNDERWRITERS LABORATORIES STANDARD NO. UL 310 3M FILE NO. E70512 Specifications Wire Size Barrel Seam Maximum Voltage Rating: Maximum Operating Temp Maximum Current Insulator Material Terminal Material Insulator Grip Material Plating: CANADIAN STANDARDS ASSOCIATION STANDARD NO. NO. 153 3M FILE NO. LR22190 See Table Above Butted/Interlock with Insulation Grip 600 V Building Wire 1000 V signs or fixtures Luminaires Same as Wire Nylon Brass Tin Installation Information WARNING Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UL Listed and CSA Certified for use on stranded copper AWG wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-482, TR-490 ratchet style hand tools. Barrel Crimp Electrical Insulation Crimp Mechanical Suitable for factory installation on steel or brass tabs, UL and CSA. Suitable for field application on brass tabs, strain relief is required, UL only. Engineering Specification Crimp-Type Female Disconnect shall, electrically and mechanically, connect permanently to the prestripped end of a stranded copper wire and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer tongue variations sized to x or x and barrel variations in wire AWG size 22-18, 16-14, 12-10 and construction, non-insulated, vinyl insulated, nylon fully insulated, etc. The female disconnect shall have regulatory agency coverage, UL Listed, CSA Certification. The tongue portion shall be marked with the wire range and manufacturer’s symbol The Nylon Insulated Female Disconnect with Interlock Barrel and Insulation Grip shall be tin plated thick brass with a tongue for gripping a x Male Tab per ANSI/NEMA CD-2 and a long barrel with a tin plated brass funnel entry insulation grip, covered by a molded nylon sleeve, color coded and sized for a specified AWG wire range Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire 1000 V signs or lighting fixtures luminaires and temperature rated maximum. Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required. 3M is a trademark of 3M Company. is a trademark of Underwriters Laboratories. is a trademark of Canadian Standards Association. IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Electrical Products Division 6801 River Place Blvd. Austin, TX 78726-9000 Litho in USA. 3M 2003 78-8126-0828-5-B

PDF Datasheet Preview

Specialty Terminals
73F-250-32-NB

Female Disconnect, Nylon Insulated
with Insulation Grip, Interlock Barrel

Data Sheet

Product Number

Wire Range AWG
73F-250-32-NB 12-10

Mates with Male Tab Width W' x Thickness

Maximum

Barrel Insulation

Length

I.D.

Diameter

UNDERWRITERS LABORATORIES STANDARD NO. UL 310 3M FILE NO. E70512

Specifications

Wire Size Barrel Seam Maximum Voltage Rating:

Maximum Operating Temp Maximum Current Insulator Material Terminal Material Insulator Grip Material Plating:

CANADIAN STANDARDS ASSOCIATION STANDARD NO. NO. 153 3M FILE NO. LR22190

See Table Above Butted/Interlock with Insulation Grip 600 V Building Wire 1000 V signs or fixtures Luminaires Same as Wire Nylon Brass Tin

Installation Information

WARNING

Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes.

UL Listed and CSA Certified for use on stranded copper AWG wire only. Strip away the end 3/8 inch of wire insulation. Make the crimp in the proper station of a recommended 3M crimp tool TH-440, TH-450 scissor style , or TR-482, TR-490 ratchet style hand tools.

Barrel Crimp Electrical

Insulation Crimp Mechanical

Suitable for factory installation on steel or brass tabs, UL and CSA. Suitable for field application on brass tabs, strain relief is required, UL only.

Engineering Specification

Crimp-Type Female Disconnect shall, electrically and mechanically, connect permanently to the prestripped end of a stranded copper wire and have a tongue portion with fingers which grip a Male Disconnect in a separable, reusable manner, forming a Quick Connect Wiring Termination.

The connector line shall offer tongue variations sized to x or x and barrel variations in wire AWG size 22-18, 16-14, 12-10 and construction, non-insulated, vinyl insulated, nylon fully insulated, etc. The female disconnect shall have regulatory agency coverage, UL Listed, CSA Certification. The tongue portion shall be marked with the wire range and manufacturer’s symbol

The Nylon Insulated Female Disconnect with Interlock Barrel and Insulation Grip shall be tin plated thick brass with a tongue for gripping a x Male Tab per ANSI/NEMA CD-2 and a long barrel with a tin plated brass funnel entry insulation grip, covered by a molded nylon sleeve, color coded and sized for a specified AWG wire range

Insulated connectors shall be UL Listed and CSA Certified for 600 V building wire 1000 V signs or lighting fixtures luminaires and temperature rated maximum.

Female Disconnects shall be suitable for field or factory wiring, with a UL Recognized strain relief required.
3M is a trademark of 3M Company.
is a trademark of Underwriters Laboratories.
is a trademark of Canadian Standards Association.

IMPORTANT NOTICE Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty Limited Remedy Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Electrical Products Division
6801 River Place Blvd. Austin, TX 78726-9000

Litho in USA. 3M 2003 78-8126-0828-5-B

More datasheets: M44473 SL001 | M44473 SL002 | M2226 SL002 | M2226 SL005 | M2226 SL001 | ACPM-9301-BLK | ACPM-9301-TR1 | ACPM-9301-SG1 | X000018 | B65525J0000R608

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 94830 Datasheet file may be downloaded here without warranties.

Datasheet ID: 94830 518736