ATF16V8C-7SC

ATF16V8C-7SC Datasheet


Atmel ATF16V8C

Part Datasheet
ATF16V8C-7SC ATF16V8C-7SC ATF16V8C-7SC (pdf)
Related Parts Information
ATF16V8C-7PU ATF16V8C-7PU ATF16V8C-7PU
ATF16V8C-7JU ATF16V8C-7JU ATF16V8C-7JU
ATF16V8C-7JI ATF16V8C-7JI ATF16V8C-7JI
ATF16V8C-7XU ATF16V8C-7XU ATF16V8C-7XU
ATF16V8C-7XC ATF16V8C-7XC ATF16V8C-7XC
ATF16V8C-7SI ATF16V8C-7SI ATF16V8C-7SI
ATF16V8C-7PI ATF16V8C-7PI ATF16V8C-7PI
ATF16V8C-7PC ATF16V8C-7PC ATF16V8C-7PC
ATF16V8C-7JC ATF16V8C-7JC ATF16V8C-7JC
ATF16V8C-5XC ATF16V8C-5XC ATF16V8C-5XC
ATF16V8C-5JC ATF16V8C-5JC ATF16V8C-5JC
ATF16V8C-7SU ATF16V8C-7SU ATF16V8C-7SU
PDF Datasheet Preview
• Industry-standard architecture

Emulates Many 20-pin Low-cost, easy to use software tools
• High speed electrically-erasable programmable logic devices EE PLD
5ns maximum pin-to-pin delay
• Low power, 100uA pin controlled power-down mode option
• CMOS and TTL compatible inputs and outputs

I/O pin keeper circuits
• Advanced flash technology

Reprogrammable 100% tested
• High reliability CMOS process
20 year data retention 100 erase/write cycles 2,000V ESD protection 200mA latchup immunity
• Commercial and industrial temperature ranges
• Dual-in-line and surface mount packages in standard pinouts
• PCI compliant
• Green ROHS compliant package options available

High Performance Electrically-erasable Programmable Logic Devices

Atmel ATF16V8C

The ATF16V8C is a high performance EECMOS programmable logic device PLD that utilizes the Atmel proven electrically-erasable EE Flash memory technology. Offered options include speeds down to 5ns and a 100uA pin-controlled power-down mode. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% for commercial range 5V devices.

The ATF16V8C incorporates a superset of the generic architectures, which allows direct replacement of the 16R8 family and most 20-pin combinatorial PLDs. Eight outputs are each allocated eight product terms. Three different modes of operation are configured automatically with software, and allow highly complex logic functions to be realized.

The ATF16V8C can significantly reduce total system power, thereby enhancing system reliability and reducing power supply costs. When pin 4 is configured as the power-down control pin, supply current drops to less than 100uA whenever the pin is high. If the powerdown feature isn't required for a particular application, pin 4 may be used as a logic input. Also, the pin-keeper circuits eliminate the need for internal pull-up resistors along with their attendant power consumption.

Figure Block diagram

Note Includes optional PD control pin

Figure

Pin name CLK I/O OE VCC PD

Pin configurations

Function Clock Logic inputs Bidirectinoal buffers Output enable +5V supply Power-down

I/CLK I1 I2

PD/I3 I4 I5 I6 I7 I8

TSSOP Top view

VCC I/O I/O I/O I/O I/O I/O I/O I/O I9/OE

DIP/SOIC Top view

PLCC Top view
3 I2 2 I1 1 I/CLK 20 VCC 19 I/O

I/CLK 1 I1 2 I2 3

PD/I3 4 I4 5 I5 6 I6 7 I7 8 I8 9

GND 10
20 VCC 19 I/O 18 I/O 17 I/O 16 I/O 15 I/O 14 I/O 13 I/O 12 I/O 11 I9/OE

PD/I3 4 I4 5 I5 6 I6 7 I7 8
18 I/O 17 I/O 16 I/O 15 I/O 14 I/O

I8 9 GND 10 I9/OE 11

I/O 12 I/O 13

Atmel ATF16V8C

Atmel ATF16V8C

Absolute maximum ratings*

Temperature under bias -40C to +85C
Ordering information
tPD ns 5
tS ns 3
tCO ns 4
Atmel ordering code*

ATF16V8C-5JX

ATF16V8C-7JU ATF16V8C-7PU ATF16V8C-7SU

ATF16V8C-5JC

ATF16V8C-7JC ATF16V8C-7PC ATF16V8C-7SC ATF16V8C-7XC ATF16V8C-7JI ATF16V8C-7PI ATF16V8C-7SI ATF16V8C-7XI

ATF16V8C-10JI

Package
20J 20P3 20S
20J 20P3 20S 20X 20J 20P3 20S 20X

Operation range Commercial
0C to 70C Industrial
-40C to 85C Commercial
0C to 70C

Commercial 0C to 70C

Industrial -40C to 85C

Industrial -40C to 85C

Using “C” Product for Industrial

To use commercial product for Industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device 7ns “C” = 10ns “I” and de-rate power by
Notes *Shaded parts are being obsoleted in 2011 The suffix, “U” and “X” as part of the ordering code, implies the package is ROHS compliant and lead free
20J 20P3 20S 20X

Package type 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Dual Inline Package PDIP 20-lead, Wide, Plastic Gull-Wing Small Outline SOIC 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP

Package Drawings 20J PLCC

PIN NO. 1 IDENTIFIER
e E1 E

D2/E2 B1

A2 A1 A
0.51 0.020 MAX 3X

This package conforms to JEDEC reference MS-018, Variation AA. Dimensions D1 and E1 do not include mold protrusion.

Allowable protrusion is mm per side. Dimension D1 and E1 include mold mismatch and are measured at the extreme material condition at the upper or lower parting line. Lead coplanarity is mm maximum.

COMMON DIMENSIONS Unit of Measure = mm

SYMBOL MIN NOM MAX NOTE

Note 2

Note 2

D2/E2

TITLE 2325 Orchard Parkway 20J, 20-lead, Plastic J-leaded Chip Carrier PLCC R San Jose, CA 95131
10/04/01
18 Atmel ATF16V8C
20P3 PDIP

D PIN 1

Atmel ATF16V8C

SEATING PLANE

A1 B B1

This package conforms to JEDEC reference MS-001, Variation AD. Dimensions D and E1 do not include mold Flash or Protrusion.

Mold Flash or Protrusion shall not exceed mm

COMMON DIMENSIONS Unit of Measure = mm

SYMBOL MIN

NOM MAX NOTE

Note 2

Note 2

TITLE 2325 Orchard Parkway 20P3, 20-lead mm Wide Plastic Dual R San Jose, CA 95131 Inline Package PDIP
1/23/04
20P3
20S SOIC
20 Atmel ATF16V8C
20X TSSOP

Dimensions in Millimeters and Inches . Controlling dimension Millimeters. JEDEC Standard MO-153 AC

Atmel ATF16V8C

INDEX MARK PIN 1

SEATING PLANE
Added green ROHS compliant package options Removed lead based packaged from ordering section
22 Atmel ATF16V8C

Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel +1 408 441-0311 Fax +1 408 487-2600

Atmel Asia Limited Unit 01-5 & 16, 19F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel +852 2245-6100 Fax +852 2722-1369

Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Tel +49 89-31970-0 Fax +49 89-3194621

Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 JAPAN Tel +81 3 3523-3551 Fax +81 3 3523-7581
logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
More datasheets: DM74LS174N | DM74LS175N | 90012T | AD61009ARSRL | ATF16V8C-7PU | ATF16V8C-7JU | ATF16V8C-7JI | ATF16V8C-7XU | ATF16V8C-7XC | ATF16V8C-7SI


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATF16V8C-7SC Datasheet file may be downloaded here without warranties.

Datasheet ID: ATF16V8C-7SC 519255