AT49F1614T-90TC

AT49F1614T-90TC Datasheet

The AT49F16X4 T is a 5.0-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each or 2,097,152 bytes of 8 bits each. The x16 data appears on I/O0 - I/O15 the x8 data appears on I/O0 - I/O7. The memory is divided into 40 sectors for erase operations. The device is offered in 48-lead TSOP and 48-ball µBGA packages. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single 5.0V power supply, making it ideally suited for in-system programming.

Part	Datasheet
AT49F1614T-90TC	AT49F1614T-90TC (pdf)

PDF Datasheet Preview
• 4.5V to 5.5V Read/Write • Access Time 90 ns • Sector Erase Architecture Thirty 32K Word 64K byte Sectors with Individual Write Lockout Eight 4K Word 8K byte Sectors with Individual Write Lockout Two 16K Word 32K byte Sectors with Individual Write Lockout • Fast Word Program Time 10 µs • Fast Sector Erase Time 200 ms • Dual-plane Organization, Permitting Concurrent Read while Program/Erase Memory Plane A Eight 4K Word, Two 16K Word and Six 32K Word Sectors Memory Plane B Twenty-four 32K Word Sectors • Erase Suspend Capability Supports Reading/Programming Data from Any Sector by Suspending Erase of Any Different Sector • Low-power Operation 60 mA Active 3 mA Standby • DATA Polling, Toggle Bit, Ready/Busy for End of Program Detection • RESET Input for Device Initialization • Sector Program Unlock Command • TSOP, CBGA and µBGA Package Options • Top or Bottom Boot Block Configuration Available The AT49F16X4 T is a 5.0-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each or 2,097,152 bytes of 8 bits each. The x16 data appears on I/O0 - I/O15 the x8 data appears on I/O0 - I/O7. The memory is divided into 40 sectors for erase operations. The device is offered in 48-lead TSOP and 48-ball µBGA packages. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single 5.0V power supply, making it ideally suited for in-system programming. The device powers on in the read mode. Command sequences are used to place the device in other operation modes such as program and erase. The device has the continued Pin Configurations Pin Name A0 - A19 CE OE WE RESET RDY/BUSY I/O0 - I/O14 I/O15 A-1 BYTE NC DC Function Addresses Chip Enable Output Enable Write Enable Reset READY/BUSY Output Data Inputs/Outputs I/O15 Data Input/Output, Word Mode A-1 LSB Address Input, Byte Mode Selects Byte or Word Mode No Connect Don’t Connect 16-megabit 1M x 16/2M x 8 5-volt Only Flash Memory AT49F1604 AT49F1604T AT49F1614 AT49F1614T Not Recommended for New Designs A15 1 A14 2 A13 3 A12 4 A11 5 A10 6 NC 10 WE 11 RESET 12 NC 14 A19 15 A18 16 A17 17 A7 18 A6 19 A5 20 A4 21 A3 22 A2 23 A1 24 TSOP Top View Type 1 48 A16 47 VCC 46 GND 45 I/O15 44 I/O7 43 I/O14 42 I/O6 41 I/O13 40 I/O5 39 I/O12 38 I/O4 37 VCC 36 I/O11 35 I/O3 34 I/O10 33 I/O2 32 I/O9 31 I/O1 30 I/O8 29 I/O0 28 OE 27 GND 26 CE 25 A0 TSOP Top View Type 1 A15 1 A14 2 A13 3 A12 4 A11 5 A10 6 A9 7 A8 8 A19 9 NC 10 WE 11 RESET 12 NC 13 NC 14 RDY/BUSY 15 A18 16 A17 17 A7 18 A6 19 A5 20 A4 21 A3 22 A2 23 A1 24 48 A16 47 BYTE 46 GND 45 I/O15/A-1 44 I/O7 43 I/O14 42 I/O6 41 I/O13 40 I/O5 39 I/O12 38 I/O4 37 VCC 36 I/O11 35 I/O3 34 I/O10 33 I/O2 32 I/O9 31 I/O1 30 I/O8 29 I/O0 28 OE 27 GND 26 CE 25 A0 AT49F1604 T AT49F1614 T µBGA Top View Ball Down AT49F1604 T /1614 T Ordering Information tACC ICC mA Active Standby Ordering Code AT49F1614-90TI Package 48T Operation Range Industrial -40°C to 85°C 48C2 48T 48U Package Type 48-ball, Plastic Chip-size Ball Grid Array Package CBGA 48-lead, Thin Small Outline Package TSOP 48-ball, Micro Ball Grid Array Package µBGA AT49F1604 T /1614 T Packaging Information 48C2, 48-ball, Plastic Chip-size Ball Grid Array Package CBGA Dimensions in Millimeters and Inches * AT49F1604 T /1614 T 48T, 48-lead, Plastic Thin Small Outline Package TSOP Dimensions in Millimeters and Inches * JEDEC OUTLINE MO-142 DD 6 54321 A B C D E F G H BSC NON-ACCUMULATIVE DIA BALL TYP Controlling dimension millimeters 48U, 48-ball, Micro Ball Grid Array Package µBGA Dimensions in Millimeters Controlling dimension millimeters 87 6 5 4 3 21 MIN. TYP NON-ACCUMULATIVE DIA TYP Atmel Headquarters Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600 Europe Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL 44 1276-686-677 FAX 44 1276-686-697 Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369 Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581 Atmel Operations Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759 Atmel Rousset Zone Industrielle 13106 Rousset Cedex France TEL 33 4-4253-6000 FAX 33 4-4253-6001 Fax-on-Demand North America 1- 800 292-8635 International 1- 408 441-0732 e-mail Web Site BBS 1- 408 436-4309 Atmel Corporation Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Marks bearing and/or are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others. Printed on recycled paper.

PDF Datasheet Preview

• 4.5V to 5.5V Read/Write
• Access Time 90 ns
• Sector Erase Architecture

Thirty 32K Word 64K byte Sectors with Individual Write Lockout Eight 4K Word 8K byte Sectors with Individual Write Lockout Two 16K Word 32K byte Sectors with Individual Write Lockout
• Fast Word Program Time 10 µs
• Fast Sector Erase Time 200 ms
• Dual-plane Organization, Permitting Concurrent Read while Program/Erase

Memory Plane A Eight 4K Word, Two 16K Word and Six 32K Word Sectors Memory Plane B Twenty-four 32K Word Sectors
• Erase Suspend Capability Supports Reading/Programming Data from Any Sector by Suspending Erase of Any Different Sector
• Low-power Operation 60 mA Active 3 mA Standby
• DATA Polling, Toggle Bit, Ready/Busy for End of Program Detection
• RESET Input for Device Initialization
• Sector Program Unlock Command
• TSOP, CBGA and µBGA Package Options
• Top or Bottom Boot Block Configuration Available

The AT49F16X4 T is a 5.0-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each or 2,097,152 bytes of 8 bits each. The x16 data appears on I/O0 - I/O15 the x8 data appears on I/O0 - I/O7. The memory is divided into 40 sectors for erase operations. The device is offered in 48-lead TSOP and 48-ball µBGA packages. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single 5.0V power supply, making it ideally suited for in-system programming.

The device powers on in the read mode. Command sequences are used to place the device in other operation modes such as program and erase. The device has the
continued

Pin Configurations

Pin Name A0 - A19 CE OE WE RESET RDY/BUSY I/O0 - I/O14

I/O15 A-1

BYTE NC DC

Function Addresses Chip Enable Output Enable Write Enable Reset READY/BUSY Output Data Inputs/Outputs I/O15 Data Input/Output, Word Mode A-1 LSB Address Input, Byte Mode Selects Byte or Word Mode No Connect Don’t Connect
16-megabit 1M x 16/2M x 8 5-volt Only Flash Memory AT49F1604 AT49F1604T AT49F1614 AT49F1614T

Not Recommended for New Designs

A15 1

A14 2

A13 3

A12 4

A11 5

A10 6

NC 10

WE 11

RESET 12

NC 14

A19 15

A18 16

A17 17

A7 18

A6 19

A5 20

A4 21

A3 22

A2 23

A1 24

TSOP Top View Type 1
48 A16 47 VCC 46 GND 45 I/O15 44 I/O7 43 I/O14 42 I/O6 41 I/O13 40 I/O5 39 I/O12 38 I/O4 37 VCC 36 I/O11 35 I/O3 34 I/O10 33 I/O2 32 I/O9 31 I/O1 30 I/O8 29 I/O0 28 OE 27 GND 26 CE 25 A0

TSOP Top View Type 1

A15 1 A14 2 A13 3 A12 4 A11 5 A10 6

A9 7 A8 8 A19 9 NC 10 WE 11 RESET 12 NC 13 NC 14 RDY/BUSY 15 A18 16 A17 17 A7 18 A6 19 A5 20 A4 21 A3 22 A2 23 A1 24
48 A16 47 BYTE 46 GND 45 I/O15/A-1 44 I/O7 43 I/O14 42 I/O6 41 I/O13 40 I/O5 39 I/O12 38 I/O4 37 VCC 36 I/O11 35 I/O3 34 I/O10 33 I/O2 32 I/O9 31 I/O1 30 I/O8 29 I/O0 28 OE 27 GND 26 CE 25 A0

AT49F1604 T AT49F1614 T
µBGA Top View Ball Down
AT49F1604 T /1614 T Ordering Information
tACC

ICC mA

Active

Standby
Ordering Code AT49F1614-90TI

Package 48T

Operation Range Industrial
-40°C to 85°C
48C2 48T 48U

Package Type 48-ball, Plastic Chip-size Ball Grid Array Package CBGA 48-lead, Thin Small Outline Package TSOP 48-ball, Micro Ball Grid Array Package µBGA

AT49F1604 T /1614 T

Packaging Information
48C2, 48-ball, Plastic Chip-size Ball Grid Array Package CBGA Dimensions in Millimeters and Inches *

AT49F1604 T /1614 T
48T, 48-lead, Plastic Thin Small Outline Package TSOP Dimensions in Millimeters and Inches *

JEDEC OUTLINE MO-142 DD
6 54321

A B C D E F G H

BSC NON-ACCUMULATIVE

DIA BALL TYP
*Controlling dimension millimeters
48U, 48-ball, Micro Ball Grid Array Package µBGA Dimensions in Millimeters
*Controlling dimension millimeters
87 6 5 4 3 21

MIN.

TYP NON-ACCUMULATIVE

DIA TYP

Atmel Headquarters

Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600

Europe Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL 44 1276-686-677 FAX 44 1276-686-697

Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369

Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581

Atmel Operations

Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759

Atmel Rousset Zone Industrielle 13106 Rousset Cedex France TEL 33 4-4253-6000 FAX 33 4-4253-6001

Fax-on-Demand North America 1- 800 292-8635 International 1- 408 441-0732
e-mail

Web Site

BBS 1- 408 436-4309

Atmel Corporation Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.

Marks bearing and/or are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others.

Printed on recycled paper.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT49F1614T-90TC Datasheet file may be downloaded here without warranties.

Datasheet ID: AT49F1614T-90TC 518697