MAXQ616V-L000+T

MAXQ616V-L000+T Datasheet

MAXQ616

Part	Datasheet
MAXQ616V-L000+T	MAXQ616V-L000+T (pdf)

Related Parts	Information
MAXQ616V-L001+T	MAXQ616V-L001+T

PDF Datasheet Preview
MAXQ616 Infrared Remote Control System-on-Chip Save Power, Cost and Board Space 16-Bump WLP Reduces Board Space Requirements by 50% Description The MAXQ616 is a low-power, 16-bit microcontroller designed for low-power applications including universal remote controls, consumer electronics, and white goods. The device combines a powerful 16-bit RISC microcontroller and integrated peripherals including a universal synchronous/asynchronous receiver-transmitter USART , an SPI master/slave and communications ports, along with an IR module with carrier frequency generation and flexible port I/O capable of multiplexed keypad control. An internal amplifier eliminates the need for external circuitry to drive the IR receiver pin. The device includes 80KB of flash memory and 2KB of data SRAM. For the ultimate in low-power battery-operated performance, the device includes an ultra-lowpower stop mode 0.2µA typ . In this mode, the minimum amount of circuitry is powered. Wakeup sources include external interrupts, the power-fail interrupt, and a timer interrupt. The microcontroller runs from a wide 1.67V to 3.6V operating voltage. Key Features • High-Performance, Low-Power, 16-Bit RISC Core • Internal 12MHz Oscillator Requires no External Components • 1.67V to 3.6V Operating Voltage • 33 Total Instructions for Simplified Programming • Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement • Dedicated Pointer for Direct Read from Code Space • 16-Bit Instruction Word, 16-Bit Data Bus • 16 x 16-Bit General-Purpose Working Registers • Memory Features o 80KB Flash Memory o 2KB Data SRAM • Additional Peripherals o Power-Fail Warning o Power-On Reset POR /Brownout Reset o Automatic IR Carrier Frequency Generation and Modulation o IR Learning Amplifier o IR Transit Driver with 200mA min Sink Current at 1.8V o Two 16-Bit Programmable Timers/Counters with Prescaler and Capture/Compare o One SPI, One and One USART Port o Programmable Watchdog Timer o 8kHz Nanopower Ring Oscillator Wake-Up Timer o Up to 10 General-Purpose I/Os • Low Power Consumption o 0.2µA typ , 2.0µA max in Stop Mode, TA = +25°C, Power-Fail Monitor Disabled o 2.0mA typ at 12MHz in Active Mode Applications/Uses • Universal Remote Controls for Smartphones • Universal Remote Controls for Tablets 2016 Maxim Integrated

PDF Datasheet Preview

MAXQ616

Infrared Remote Control System-on-Chip

Save Power, Cost and Board Space 16-Bump WLP Reduces Board Space Requirements by 50%

Description The MAXQ616 is a low-power, 16-bit microcontroller designed for low-power applications including universal remote controls, consumer electronics, and white goods. The device combines a powerful 16-bit RISC microcontroller and integrated peripherals including a universal synchronous/asynchronous receiver-transmitter USART , an SPI master/slave and communications ports, along with an IR module with carrier frequency generation and flexible port I/O capable of multiplexed keypad control. An internal amplifier eliminates the need for external circuitry to drive the IR receiver pin.

The device includes 80KB of flash memory and 2KB of data SRAM.

For the ultimate in low-power battery-operated performance, the device includes an ultra-lowpower stop mode 0.2µA typ . In this mode, the minimum amount of circuitry is powered. Wakeup sources include external interrupts, the power-fail interrupt, and a timer interrupt. The microcontroller runs from a wide 1.67V to 3.6V operating voltage.

Key Features
• High-Performance, Low-Power, 16-Bit RISC Core
• Internal 12MHz Oscillator Requires no External Components
• 1.67V to 3.6V Operating Voltage
• 33 Total Instructions for Simplified Programming
• Three Independent Data Pointers Accelerate Data Movement with Automatic

Increment/Decrement
• Dedicated Pointer for Direct Read from Code Space
• 16-Bit Instruction Word, 16-Bit Data Bus
• 16 x 16-Bit General-Purpose Working Registers
• Memory Features
o 80KB Flash Memory o 2KB Data SRAM
• Additional Peripherals o Power-Fail Warning o Power-On Reset POR /Brownout Reset o Automatic IR Carrier Frequency Generation and Modulation o IR Learning Amplifier o IR Transit Driver with 200mA min Sink Current at 1.8V o Two 16-Bit Programmable Timers/Counters with Prescaler and

Capture/Compare o One SPI, One and One USART Port o Programmable Watchdog Timer
o 8kHz Nanopower Ring Oscillator Wake-Up Timer o Up to 10 General-Purpose I/Os
• Low Power Consumption o 0.2µA typ , 2.0µA max in Stop Mode, TA = +25°C, Power-Fail Monitor Disabled o 2.0mA typ at 12MHz in Active Mode Applications/Uses
• Universal Remote Controls for Smartphones
• Universal Remote Controls for Tablets
2016 Maxim Integrated

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAXQ616V-L000+T Datasheet file may be downloaded here without warranties.

Datasheet ID: MAXQ616V-L000+T 647461