MAX9587AZT+

MAX9587AZT+ Datasheet

µMAX is a registered trademark of Maxim Integrated Products, Inc.

Part	Datasheet
MAX9587AZT+	MAX9587AZT+ (pdf)

Related Parts	Information
MAX9587EVKIT+	MAX9587EVKIT+

PDF Datasheet Preview
Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers The are small, low-power, multichannel video amplifiers with integrated reconstruction filters and input clamps. Specially suited for standarddefinition video signals, these devices are ideal for a wide range of television and set-top box applications. The video signals from the outputs of a digital-to-analog converter DAC are AC-coupled to the inputs of the External video signals, in which the DC bias is usually not known, can also be AC-coupled to the inputs of the input sync-tip clamps set the DC level of composite video or luma signals, and the input bias circuits set the DC level of chroma signals. The reconstruction filter typically has ±1dB passband flatness at 8.5MHz and 55dB attenuation at 27MHz. The amplifiers have 2V/V gain and the outputs can be DCcoupled to a 75Ω load, which is the equivalent of two video loads, or AC-coupled to a 150Ω load. The operate from a 2.7V to 3.6V single supply and are specified over the -40°C to +125°C automotive temperature range. The are offered in small SOT23 and packages. Set-Top Boxes Televisions µMAX is a registered trademark of Maxim Integrated Products, Inc. o Single- MAX9586 , Dual- MAX9587 , Triple- MAX9588 , and Quad- MAX9589 Channel Devices o 8.5MHz, ±1dB Passband o 55dB Attenuation at 27MHz o Fixed Gain of 2V/V o Low Power 4.25mA per Channel o 2.7V to 3.6V Single-Supply Operation o Small SOT23 and µMAX Packages Ordering Information PART PIN-PACKAGE CHANNELS MAX9586AZK+T 5 Thin SOT23 MAX9587AZT+T 6 Thin SOT23 MAX9588AUA+T 8 µMAX MAX9589AUB+T 10 µMAX Note All devices are specified over the -40°C to +125°C operating temperature range. +Denotes a lead Pb -free/RoHS-compliant package. T = Tape and reel. Pin Configurations and Selector Guide located at end of data sheet. Block Diagrams UNKNOWN BIAS INA CLAMP MAX9588 AV = 2V/V 300mV OUTA INB CLAMP OUTB AV = 2V/V INC BIAS Block Diagrams continued at end of data sheet. OUTC AV = 2V/V Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers ABSOLUTE MAXIMUM RATINGS VDD to GND to +4V IN_ to GND to +4V SHDN to +4V OUT_ Short Circuit Duration to VDD, GND .................Continuous Input Current IN_, SHDN Continuous Power Dissipation TA = +70°C 5-Pin Thin SOT23 derate 9.1mW/°C above +70°C ....727mW 6-Pin Thin SOT23 derate 9.1mW/°C above +70°C ....727mW 8-Pin µMAX derate 4.5mW/°C above +70°C .............362mW 10-Pin µMAX derate 5.6mW/°C above +70°C ...........444mW Operating Temperature Range .........................-40°C to +125°C Junction Temperature Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10s .................................+300°C Soldering Temperature reflow Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS VDD = 3.3V, VGND = 0V, VRL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C. Note 1 PARAMETER CONDITIONS TYP MAX UNITS Supply Voltage Range Supply Current Sync-Tip Clamp Level Input Voltage Range VDD IDD VCLP Guaranteed by PSRR Per channel Sync-tip clamp VDD = 2.7V, sync-tip clamp input Guaranteed by DC VDD = 2.7V, bias input voltage gain VDD = 3V, sync-tip clamp input VP-P VDD = 3V, bias input Sync Crush Sync-tip clamp, percentage reduction in sync pulse 0.3VP-P , guaranteed by input clamping current measurement, measured at input Input Clamping Current Maximum Input Source Resistance Sync-tip clamp Bias Voltage Input Resistance VBIAS Bias circuit Bias circuit VDD = 2.7V, VIN = VCLP to VCLP + 1.05V VDD = 3V, VIN = VCLP to VCLP + 1.2V DC Voltage Gain Note 2 RL = 150Ω to GND VDD = 2.7V, VIN = VBIAS ±0.525V DC Gain Matching Output Level

PDF Datasheet Preview

Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers

The are small, low-power, multichannel video amplifiers with integrated reconstruction filters and input clamps. Specially suited for standarddefinition video signals, these devices are ideal for a wide range of television and set-top box applications.

The video signals from the outputs of a digital-to-analog converter DAC are AC-coupled to the inputs of the External video signals, in which the DC bias is usually not known, can also be AC-coupled to the inputs of the input sync-tip clamps set the DC level of composite video or luma signals, and the input bias circuits set the DC level of chroma signals.

The reconstruction filter typically has ±1dB passband flatness at 8.5MHz and 55dB attenuation at 27MHz. The amplifiers have 2V/V gain and the outputs can be DCcoupled to a 75Ω load, which is the equivalent of two video loads, or AC-coupled to a 150Ω load.

The operate from a 2.7V to 3.6V single supply and are specified over the -40°C to +125°C automotive temperature range. The are offered in small SOT23 and packages.

Set-Top Boxes

Televisions
µMAX is a registered trademark of Maxim Integrated Products, Inc.
o Single- MAX9586 , Dual- MAX9587 , Triple- MAX9588 , and Quad- MAX9589 Channel Devices
o 8.5MHz, ±1dB Passband o 55dB Attenuation at 27MHz o Fixed Gain of 2V/V o Low Power 4.25mA per Channel o 2.7V to 3.6V Single-Supply Operation o Small SOT23 and µMAX Packages
Ordering Information

PART

PIN-PACKAGE

CHANNELS

MAX9586AZK+T
5 Thin SOT23

MAX9587AZT+T
6 Thin SOT23

MAX9588AUA+T
8 µMAX

MAX9589AUB+T
10 µMAX

Note All devices are specified over the -40°C to +125°C operating temperature range. +Denotes a lead Pb -free/RoHS-compliant package. T = Tape and reel.

Pin Configurations and Selector Guide located at end of data sheet.

Block Diagrams

UNKNOWN BIAS

INA CLAMP

MAX9588

AV = 2V/V
300mV OUTA

INB CLAMP

OUTB

AV = 2V/V

INC BIAS

Block Diagrams continued at end of data sheet.

OUTC

AV = 2V/V

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at

Single, Dual, Triple, and Quad Standard-Definition Video Filter Amplifiers with AC-Coupled Input Buffers

ABSOLUTE MAXIMUM RATINGS

VDD to GND to +4V IN_ to GND to +4V SHDN to +4V OUT_ Short Circuit Duration to VDD, GND .................Continuous Input Current

IN_, SHDN Continuous Power Dissipation TA = +70°C
5-Pin Thin SOT23 derate 9.1mW/°C above +70°C ....727mW
6-Pin Thin SOT23 derate 9.1mW/°C above +70°C ....727mW 8-Pin µMAX derate 4.5mW/°C above +70°C .............362mW 10-Pin µMAX derate 5.6mW/°C above +70°C ...........444mW Operating Temperature Range .........................-40°C to +125°C Junction Temperature Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10s .................................+300°C Soldering Temperature reflow

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

VDD = 3.3V, VGND = 0V, VRL = no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C. Note 1

PARAMETER

CONDITIONS

TYP MAX UNITS

Supply Voltage Range Supply Current Sync-Tip Clamp Level

Input Voltage Range

VDD IDD VCLP

Guaranteed by PSRR

Per channel

Sync-tip clamp

VDD = 2.7V, sync-tip clamp input

Guaranteed by DC VDD = 2.7V, bias input
voltage gain

VDD = 3V, sync-tip clamp input

VP-P

VDD = 3V, bias input

Sync Crush

Sync-tip clamp, percentage reduction in sync pulse 0.3VP-P , guaranteed by input clamping current measurement, measured at input

Input Clamping Current

Maximum Input Source Resistance

Sync-tip clamp

Bias Voltage Input Resistance

VBIAS

Bias circuit Bias circuit

VDD = 2.7V, VIN = VCLP to VCLP + 1.05V

VDD = 3V, VIN = VCLP to

VCLP + 1.2V

DC Voltage Gain Note 2

RL = 150Ω to GND

VDD = 2.7V, VIN = VBIAS
±0.525V

DC Gain Matching Output Level

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX9587AZT+ Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX9587AZT+ 647430