MAX106EVKIT

MAX106EVKIT Datasheet

MAX104/MAX106/MAX108 Evaluation Kits

Part	Datasheet
MAX106EVKIT	MAX106EVKIT (pdf)

Related Parts	Information
MAX104EVKIT	MAX104EVKIT

PDF Datasheet Preview
MAX104/MAX106/MAX108 Evaluation Kits Evaluate MAX104/MAX106/MAX108 The MAX104/MAX106/MAX108 evaluation kits EV kits are designed to simplify evaluation of the devices’ analog-to-digital converters ADCs . Each EV kit contains all circuitry necessary to evaluate the dynamic performance of these ultra-high-speed converters, including the power-supply generation for the PECL termination voltage PECLVTT . Since the design combines highspeed analog and digital circuitry, the board layout calls for special precautions and design features. Connectors for the power supplies VCCA/VCCI, VCCD, VCCO, VEE , SMA connectors for analog and clock inputs VIN+, VIN-, CLK+, CLK- , and all digital PECL outputs simplify connection to the EV kit. The four-layer board layout GETek material is optimized for best dynamic performance of the MAX104 family. The EV kits come with a MAX104/MAX106/MAX108 installed on the board with a heatsink attached for operation over the full commercial temperature range. DESIGNATION QTY C1, C13, C20, C31, C40, C46, C48 10µF ±10%, 16V tantalum caps AVX TAJD106D016 C2, C14, C17, C18, C19, C21, C32, C41, C47, 0.01µF ±10% ceramic capacitors 0603 C49, C15, C16, 47pF ±10% ceramic capacitors 0402 1 1N5819 Schottky diode 1 potentiometer R3, R4 Not populated see text for description of reset input operation. o Clock and Analog Inputs Through SMA Coaxial Connectors o ±250mV Input Signal Range o Demultiplexed Differential PECL Outputs o On-Board Generation of PECL Termination Voltage PECLVTT o On-Board Generation of ECL Termination Voltage ECLVTT o Separate Analog and Digital Power and Ground Connections with Optimized Four-Layer PCB o Square-Pin Headers for Easy Connection of Logic Analyzer to Digital Outputs o Fully Assembled and Tested Ordering Information PART TEMP. RANGE PINPACKAGE MAX104EVKIT 0°C to +70°C 192 ESBGA MAX106EVKIT 0°C to +70°C 192 ESBGA MAX108EVKIT* 0°C to +70°C 192 ESBGA *Future factory for availability. SAMPLING RATE 1Gsps 600Msps 1.5Gsps Component List DESIGNATION QTY 38 ±1% resistors 0603 R51, R53 2 ±1% resistors 0603 R52, R54 2 ±1% resistors 0603 10 SMA connectors edge mounted JU3, 5 3-pin headers JU2, JU4, JU5, JUA0- to JUA7-, JUA0+ to JUA7+, JUP0- to JUP7-, JUP0+ to JUP7+, JUOR+, JUOR-, JUDR-, JUDR+, JURO-, JURO+ 2-pin headers GETek is trademark of GE Electromaterials. Maxim Integrated Products 1 For free samples & the latest literature or phone For small orders, phone Evaluate MAX104/MAX106/MAX108 MAX104/MAX106/MAX108 Evaluation Kits Component List continued DESIGNATION QTY None VCCO, VCCD, GNDD, PECLVTT, GNDA, VCCA, 24 VCCI, GNDI, VEE, ECLVTT None DESCRIPTION Protective feet Test points

PDF Datasheet Preview

MAX104/MAX106/MAX108 Evaluation Kits

Evaluate MAX104/MAX106/MAX108

The MAX104/MAX106/MAX108 evaluation kits EV kits are designed to simplify evaluation of the devices’ analog-to-digital converters ADCs . Each EV kit contains all circuitry necessary to evaluate the dynamic performance of these ultra-high-speed converters, including the power-supply generation for the PECL termination voltage PECLVTT . Since the design combines highspeed analog and digital circuitry, the board layout calls for special precautions and design features.

Connectors for the power supplies VCCA/VCCI, VCCD, VCCO, VEE , SMA connectors for analog and clock inputs VIN+, VIN-, CLK+, CLK- , and all digital PECL outputs simplify connection to the EV kit. The four-layer board layout GETek material is optimized for best dynamic performance of the MAX104 family.

The EV kits come with a MAX104/MAX106/MAX108 installed on the board with a heatsink attached for operation over the full commercial temperature range.

DESIGNATION QTY

C1, C13, C20, C31, C40, C46, C48
10µF ±10%, 16V tantalum caps AVX TAJD106D016

C2, C14,

C17, C18, C19, C21, C32, C41, C47,
0.01µF ±10% ceramic capacitors 0603

C49,

C15, C16,
47pF ±10% ceramic capacitors 0402
1 1N5819 Schottky diode
1 potentiometer

R3, R4

Not populated see text for description of reset input operation.
o Clock and Analog Inputs Through SMA Coaxial Connectors
o ±250mV Input Signal Range
o Demultiplexed Differential PECL Outputs
o On-Board Generation of PECL Termination Voltage PECLVTT
o On-Board Generation of ECL Termination Voltage ECLVTT
o Separate Analog and Digital Power and Ground Connections with Optimized Four-Layer PCB
o Square-Pin Headers for Easy Connection of Logic Analyzer to Digital Outputs
o Fully Assembled and Tested
Ordering Information

PART

TEMP. RANGE

PINPACKAGE

MAX104EVKIT 0°C to +70°C 192 ESBGA

MAX106EVKIT 0°C to +70°C 192 ESBGA

MAX108EVKIT* 0°C to +70°C 192 ESBGA
*Future factory for availability.

SAMPLING RATE
1Gsps 600Msps 1.5Gsps

Component List

DESIGNATION QTY
38 ±1% resistors 0603

R51, R53
2 ±1% resistors 0603

R52, R54
2 ±1% resistors 0603
10 SMA connectors edge mounted

JU3, 5 3-pin headers

JU2, JU4, JU5,

JUA0- to JUA7-,

JUA0+ to JUA7+,

JUP0- to JUP7-, JUP0+ to JUP7+,

JUOR+, JUOR-,

JUDR-, JUDR+,

JURO-, JURO+
2-pin headers

GETek is trademark of GE Electromaterials.

Maxim Integrated Products 1

For free samples & the latest literature or phone For small orders, phone

Evaluate MAX104/MAX106/MAX108

MAX104/MAX106/MAX108 Evaluation Kits

Component List continued

DESIGNATION QTY

None

VCCO, VCCD, GNDD, PECLVTT,

GNDA, VCCA, 24 VCCI, GNDI, VEE,

ECLVTT

None

DESCRIPTION Protective feet

Test points

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX106EVKIT Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX106EVKIT 647199