DSTINIM410#

DSTINIM410# Datasheet

DSTINIm410 Networked Micro Evaluation Board

Part	Datasheet
DSTINIM410#	DSTINIM410# (pdf)

PDF Datasheet Preview
DSTINIm410 Networked Micro Evaluation Board The DSTINIm410 is a fully assembled and tested circuit board that evaluates the DS80C410 network microcontroller. In addition to the DS80C410, the DSTINIm410 includes a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into a 144-pin SODIMM connector. For evaluation, the DSTINIm410 can be inserted into the DSTINIs400 socket board. The combination of the two boards allows full evaluation of the features of the DS80C410 using an Ethernet network. Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612 Getting Started with the TINIm400 DS80C400 Verification Module. ORDERING INFORMATION PART DSTINIm410# TEMP RANGE Room temp Room temp DIMENSIONS Approx. 67mm x 48mm, 144 SODIMM Approx. 67mm x 48mm, 144 SODIMM Note To evaluate the DS80C410, order the DSTINIm410 and DSTINIs400. # Denotes a RoHS-compliant device that may include lead that is exempt under the RoHS requirements. TINI and 1-Wire are registered trademarks of Dallas Semiconductor. Hosts the Runtime Environment in Validated Hardware Design in Conjunction with the DSTINIs400 Industry Standard MII Interface to Connects to Network Interfaces Including 10/100 Base-T, Optical, and HomePNA Three Hardware Serial Ports Integrated Network Master CAN 2.0B Port Real-Time Clock for Time Stamping 1MB Flash ROM for Application Storage 1MB NV SRAM for Data Storage 3.3V Single-Supply Operation Fully Assembled and Tested Design COMPONENT LIST DESIGNATION QTY C17, C18 C6, C7 C19, C20 BT1 DN1 0.1uF, ±20%, 10V ceramic capacitors 0805 27pF, ±20%, 50V C0G ceramic capacitors 0805 1.0uF, ±20%, 10V ceramic capacitor 1206 4.7uF, ±20%, 10V ceramic capacitor 1206 47uF, ±20%, tantalum capacitors C 1 CR1632 3V lithium cell 1 BAT54S diode SOT23 DESIGNATION DS1 Q1, Q3 Q2 R1, R4, R7, R8 R2 R3 R5 QTY 1 2 SML-LX23SRC Lumex LED BSS84 P-Channel FET SOT23 2N7002 N-Channel FET SOT23 10kΩ, ±5% resistors 0805 1.5kΩ, ±5% resistor 0805 1kΩ, ±5% resistor 0805 2.2kΩ, ±5% resistor 0805 1 of 5 DSTINIm410 Networked Microcontroller Eval Board COMPONENT LIST continued DESIGNATION QTY 1 10Ω, ±5% resistor 0805

PDF Datasheet Preview

DSTINIm410 Networked Micro Evaluation Board

The DSTINIm410 is a fully assembled and tested circuit board that evaluates the DS80C410 network microcontroller. In addition to the DS80C410, the DSTINIm410 includes a real-time clock, 1MB flash, 1MB static RAM, and support for an external Ethernet PHY for connecting to a wide variety of networks. The circuit board is designed as a module to be plugged into a 144-pin SODIMM connector. For evaluation, the DSTINIm410 can be inserted into the DSTINIs400 socket board. The combination of the two boards allows full evaluation of the features of the DS80C410 using an Ethernet network.

Detailed information about the initial setup process and use of the TINI platform is contained in Application Note 612 Getting Started with the TINIm400 DS80C400 Verification Module.
ORDERING INFORMATION

PART DSTINIm410#

TEMP RANGE Room temp Room temp

DIMENSIONS

Approx. 67mm x 48mm, 144 SODIMM

Approx. 67mm x 48mm, 144 SODIMM

Note To evaluate the DS80C410, order the DSTINIm410 and DSTINIs400.
# Denotes a RoHS-compliant device that may include lead that is exempt under the RoHS requirements.

TINI and 1-Wire are registered trademarks of Dallas Semiconductor.

Hosts the Runtime Environment in Validated Hardware Design in Conjunction with the DSTINIs400

Industry Standard MII Interface to Connects to Network Interfaces Including 10/100 Base-T, Optical, and HomePNA

Three Hardware Serial Ports Integrated Network Master

CAN 2.0B Port

Real-Time Clock for Time Stamping
1MB Flash ROM for Application Storage
1MB NV SRAM for Data Storage
3.3V Single-Supply Operation

Fully Assembled and Tested Design

COMPONENT LIST

DESIGNATION QTY

C17,

C18 C6, C7

C19, C20 BT1 DN1
0.1uF, ±20%, 10V ceramic capacitors 0805
27pF, ±20%, 50V C0G ceramic capacitors 0805
1.0uF, ±20%, 10V ceramic capacitor 1206
4.7uF, ±20%, 10V ceramic capacitor 1206
47uF, ±20%, tantalum capacitors C
1 CR1632 3V lithium cell
1 BAT54S diode SOT23

DESIGNATION DS1

Q1, Q3

Q2 R1, R4, R7, R8

R2 R3 R5

QTY 1 2

SML-LX23SRC Lumex LED BSS84 P-Channel FET SOT23 2N7002 N-Channel FET SOT23 10kΩ, ±5% resistors 0805 1.5kΩ, ±5% resistor 0805 1kΩ, ±5% resistor 0805 2.2kΩ, ±5% resistor 0805
1 of 5

DSTINIm410 Networked Microcontroller Eval Board

COMPONENT LIST continued

DESIGNATION QTY
1 10Ω, ±5% resistor 0805

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSTINIM410# Datasheet file may be downloaded here without warranties.

Datasheet ID: DSTINIM410# 647196