DS1075K

DS1075K Datasheet

DS1075

Part	Datasheet
DS1075K	DS1075K (pdf)

PDF Datasheet Preview
§ Programs EEPROM to set frequency and operating modes § Supports Dallas Programmable Oscillator family DS1075 DS1075-IND DS1073 DS1065 § Operates with a PC-compatible host system § Easy Windows installation Win95 or higher § Demonstrates ease of programming frequency changes through the prescaler and divider reference choices, internal-external-crystal oscillator power-down mode output enable/disable Kit Contents 1 pc. Program/Evaluation PC board 1 pc. floppy disk with Software Samples 300mil DIP 2 DS1075M-060 2 DS1075M-066 2 DS1075M-080 2 DS1075M-100 DS1075K Oscillator Programming/ Evaluation Kit DS1075 Programming/Evaluation Kit Equipment Needed To use the DS1075K, you will need An IBM-compatible PC running Microsoft windows 95 with a floppy drive and an available serial port A 5V power supply with suitable connectors to fit the banana jacks on the PC Board A RS232 cable with DB25 connector to connect from the PC serial port to the kit The DS1075K programming/evaluation kit makes programming and performance evaluation of the Dallas oscillator product line easy. It contains everything needed to program the Dallas programmable oscillators with this kit the user can change the register setting that controls the mode of operation and the divide-by number for the selection of output frequency desired. The kit makes programming as easy and fast as a “click of the mouse,” and you have changed the EEPROM register setting that controls the frequency selection and operation mode. Programming of 8pin DIP part is supported in the kit. An SO socket ENPLAS OTS-8 is required to program 8-pin SO parts. For more information contact Application Support 972 371-4289 or fax 972 371-4799 Marketing Support 972 371-6001 1 of 1 090302

PDF Datasheet Preview

§ Programs EEPROM to set frequency and
operating modes
§ Supports Dallas Programmable Oscillator
family

DS1075

DS1075-IND

DS1073

DS1065
§ Operates with a PC-compatible host system
§ Easy Windows installation Win95 or higher
§ Demonstrates
ease of programming frequency changes
through the prescaler and divider
reference choices, internal-external-crystal
oscillator
power-down mode
output enable/disable

Kit Contents
1 pc. Program/Evaluation PC board
1 pc. floppy disk with Software

Samples 300mil DIP 2 DS1075M-060 2 DS1075M-066 2 DS1075M-080 2 DS1075M-100

DS1075K

Oscillator Programming/ Evaluation Kit

DS1075 Programming/Evaluation Kit

Equipment Needed

To use the DS1075K, you will need An IBM-compatible PC running Microsoft
windows 95 with a floppy drive and an available serial port A 5V power supply with suitable connectors to fit the banana jacks on the PC Board A RS232 cable with DB25 connector to connect from the PC serial port to the kit

The DS1075K programming/evaluation kit makes programming and performance evaluation of the Dallas oscillator product line easy. It contains everything needed to program the Dallas programmable oscillators with this kit the user can change the register setting that controls the mode of operation and the divide-by number for the selection of output frequency desired.

The kit makes programming as easy and fast as a “click of the mouse,” and you have changed the EEPROM register setting that controls the frequency selection and operation mode. Programming of 8pin DIP part is supported in the kit. An SO socket ENPLAS OTS-8 is required to program 8-pin SO parts.

For more information contact Application Support 972 371-4289 or fax 972 371-4799 Marketing Support 972 371-6001
1 of 1
090302

More datasheets: ADM6346-42ARTZ-R7 | CY28416OXC | CY28416OXCT | XMC0204E2-03G | AT27LV040A-90TU | BDS150 | BDS210 | 7-323-BA | 7-322-BA | 3312GM

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DS1075K Datasheet file may be downloaded here without warranties.

Datasheet ID: DS1075K 508380