XMC0204E2-03G

XMC0204E2-03G Datasheet

Model XMC0204E2-03G

Part	Datasheet
XMC0204E2-03G	XMC0204E2-03G (pdf)

PDF Datasheet Preview
Model XMC0204E2-03G Hybrid Coupler 3 dB, 90° Description The XMC0204E2-03G is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for broad band S-band radar applications and high reliability applications in the 2000 MHz to 4000 MHz range. It can be used in high power applications up to 200 Watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion CTE compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Available in 6 of 6 ENIG XMC0204E2-03G RoHS compliant finish. Features: • 2000 - 4000 MHz • S Band Radar • High Power • Very Low Loss • Tight Amplitude • High Isolation • Production Friendly • Tape and Reel • ENIG Finish Electrical Specifications ** Frequency Isolation 2700 - 3500 2300 - 4000 Phase dB Min 23 20 Power Degrees 90 ± 90 ± Avg. CW Watts Insertion Loss dB Max ΘJC ºC/Watt VSWR Max 1 Operating Temp. -55 to +85 -55 to +85 Amplitude Balance dB Max ± ± Power Handling for commercial, non-life critical applications. See derating chart for other applications *Specification based on performance of unit properly installed on Anaren Test Board 58481-0001 with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details. Mechanical Outline Available on Tape USA/Canada 315 432-8909 and Reel for Pick and Toll Free: 800 411-6596 Place Manufacturing. Europe: +44 2392-232392 Model XMC0204E2-03G Hybrid Coupler Pin Configuration The XMC0204E2-03G has an orientation marker to denote Pin Once port one has been identified the other ports are known automatically. Please see the chart below for clarification:

PDF Datasheet Preview

Model XMC0204E2-03G

Hybrid Coupler 3 dB, 90°

Description The XMC0204E2-03G is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for broad band S-band radar applications and high reliability applications in the 2000 MHz to 4000 MHz range. It can be used in high power applications up to 200 Watts.

Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion CTE compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Available in 6 of 6 ENIG XMC0204E2-03G RoHS compliant finish.

Features:
• 2000 - 4000 MHz
• S Band Radar
• High Power
• Very Low Loss
• Tight Amplitude
• High Isolation
• Production Friendly
• Tape and Reel
• ENIG Finish

Electrical Specifications **

Frequency Isolation
2700 - 3500 2300 - 4000

Phase
dB Min
23 20

Power

Degrees
90 ±
90 ±

Avg. CW Watts

Insertion Loss
dB Max
ΘJC
ºC/Watt

VSWR

Max 1

Operating Temp.
-55 to +85
-55 to +85

Amplitude Balance
dB Max
± ±
*Power Handling for commercial, non-life critical applications. See derating chart for other applications **Specification based on performance of unit properly installed on Anaren Test Board 58481-0001 with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details.

Mechanical Outline

Available on Tape

USA/Canada 315 432-8909
and Reel for Pick and

Toll Free:
800 411-6596

Place Manufacturing.

Europe:
+44 2392-232392

Model XMC0204E2-03G

Hybrid Coupler Pin Configuration The XMC0204E2-03G has an orientation marker to denote Pin Once port one has been identified the other ports are known automatically. Please see the chart below for clarification:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived XMC0204E2-03G Datasheet file may be downloaded here without warranties.

Datasheet ID: XMC0204E2-03G 518036