MX29GL128EDXFI-11G

MX29GL128EDXFI-11G Datasheet

MX29GL128E

Part	Datasheet
MX29GL128EDXFI-11G	MX29GL128EDXFI-11G (pdf)

Related Parts	Information
MX29GL128EHXCI-90G	MX29GL128EHXCI-90G
MX29GL128EUXFI-11G	MX29GL128EUXFI-11G
MX29GL128EDT2I-11G	MX29GL128EDT2I-11G
MX29GL128EUT2I-11G	MX29GL128EUT2I-11G

PDF Datasheet Preview
MX29GL128E MX29GL128E DATASHEET P/N:PM1500 MX29GL128E SINGLE VOLTAGE 3V ONLY FLASH MEMORY GENERAL FEATURES • Power Supply Operation - to volt for read, erase, and program operations - MX29GL128E H/L VI/O=VCC=2.7V~3.6V, VI/O voltage must tight with VCC - MX29GL128E U/D VI/O=1.65V~3.6V for Input/Output • Byte/Word mode switchable - 16,777,216 x 8 / 8,388,608 x 16 • 64KW/128KB uniform sector architecture - 128 equal sectors • 16-byte/8-word page read buffer • 64-byte/32-word write buffer • Extra 128-word sector for security - Features factory locked and identifiable, and customer lockable • Advanced sector protection function Solid and Password Protect • Latch-up protected to 100mA from -1V to 1.5xVcc • Low Vcc write inhibit Vcc VLKO • Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash • Deep power down mode PERFORMANCE • High Performance - Fast access time - MX29GL128E H/L 90ns VCC=2.7~3.6V - MX29GL128E U/D 110ns VCC=2.7~3.6V, V I/O=1.65V to Vcc - Page access time - MX29GL128E H/L 25ns - MX29GL128E U/D 30ns - Fast program time 10us/word - Fast erase time 0.5s/sector • Low Power Consumption - Low active read current 10mA typical at 5MHz - Low standby current 20uA typical • Typical 100,000 erase/program cycle • 20 years data retention SOFTWARE FEATURES • Program/Erase Suspend & Program/Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased - Suspends sector program operation to read data from another sector which is not being program • Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface CFI HARDWARE FEATURES • Ready/Busy# RY/BY# Output - Provides a hardware method of detecting program and erase operation completion • Hardware Reset# Input - Provides a hardware method to reset the internal state machine to read mode • WP#/ACC input pin - Hardware write protect pin/Provides accelerated program capability PACKAGE • 56-Pin TSOP • 64-Ball FBGA 10mm x 13mm • 64-Ball LFBGA 11mm x 13mm • 70-Pin SSOP • All devices are RoHS Compliant and Halogen-free P/N:PM1500 PIN CONFIGURATION 56 TSOP RESET# WP#/ACC RY/BY# MX29GL128E BYTE# Q15/A-1 VI/O 64 FBGA/64 LFBGA BYTE# Q15/ RES- WP#/ P/N:PM1500 MX29GL128E 70 SSOP BYTE# WP#/ACC RESET# Q15/A-1 PIN DESCRIPTION ORDERING INFORMATION PART NO. MX29GL128EHMC-90G * MX29GL128EHXFI-90G MX29GL128ELXFI-90G MX29GL128EHXCI-90G MX29GL128ELXCI-90G MX29GL128EHT2I-90G MX29GL128ELT2I-90G MX29GL128EUXFI-11G MX29GL128EDXFI-11G MX29GL128EUT2I-11G MX29GL128EDT2I-11G ACCESS TIME ns 90 110 Note 70-pin SSOP only for Pachinko Socket. MX29GL128E PACKAGE 70 Pin SSOP 64 LFBGA 64 LFBGA 64 FBGA 64 FBGA 56 Pin TSOP 56 Pin TSOP 64 LFBGA 64 LFBGA 56 Pin TSOP 56 Pin TSOP Remark VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC P/N:PM1500 MX29GL128E PART NAME DESCRIPTION MX 29 GL 128 E H T2 I OPTION G RoHS compliant & Halogen-free with Vcc 2.7V~3.6V SPEED 90 90ns 11 110ns TEMPERATURE RANGE I Industrial -40° C to 85° C Commercial 0° C to 70° C PACKAGE T2 56-TSOP M 70SSOP XF LFBGA 11mm x 13mm XC FBGA 10mm x 13mm PRODUCT TYPE Protection when WP#=VIL H VI/O=VCC=2.7 to 3.6V, Highest Address Sector Protected L VI/O=VCC=2.7 to 3.6V, Lowest Address Sector Protected U VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Highest Address Sector Protected D VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Lowest Address Sector Protected DENSITY & MODE 128 128Mb x8/x16 Architecture TYPE GL 3V Page Mode DEVICE 29:Flash P/N:PM1500 PACKAGE INFORMATION MX29GL128E P/N:PM1500 MX29GL128E P/N:PM1500 MX29GL128E P/N:PM1500 MX29GL128E P/N:PM1500 MX29GL128E Added overshoot & undershoot specifications. Removed "Preliminary". Changed data retention from 10 years to 20 years. Modified Tdf max. = 20ns. Page P4 P37 P2,61 P40 Date APR/28/2009 Added 1.8V VI/O information. P2,37,40 JUN/29/2009 P64,65 Modified Tsrw min. = 35ns. Added Icr2 parameter and "status Polling for write buffer program" P38,56

PDF Datasheet Preview

MX29GL128E

MX29GL128E DATASHEET

P/N:PM1500

MX29GL128E

SINGLE VOLTAGE 3V ONLY FLASH MEMORY

GENERAL FEATURES
• Power Supply Operation
- to volt for read, erase, and program operations - MX29GL128E H/L VI/O=VCC=2.7V~3.6V, VI/O voltage must tight with VCC - MX29GL128E U/D VI/O=1.65V~3.6V for Input/Output
• Byte/Word mode switchable - 16,777,216 x 8 / 8,388,608 x 16
• 64KW/128KB uniform sector architecture - 128 equal sectors
• 16-byte/8-word page read buffer
• 64-byte/32-word write buffer
• Extra 128-word sector for security - Features factory locked and identifiable, and customer lockable
• Advanced sector protection function Solid and Password Protect
• Latch-up protected to 100mA from -1V to 1.5xVcc
• Low Vcc write inhibit Vcc VLKO
• Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash
• Deep power down mode

PERFORMANCE
• High Performance
- Fast access time - MX29GL128E H/L 90ns VCC=2.7~3.6V - MX29GL128E U/D 110ns VCC=2.7~3.6V, V I/O=1.65V to Vcc
- Page access time - MX29GL128E H/L 25ns - MX29GL128E U/D 30ns
- Fast program time 10us/word - Fast erase time 0.5s/sector
• Low Power Consumption - Low active read current 10mA typical at 5MHz - Low standby current 20uA typical
• Typical 100,000 erase/program cycle
• 20 years data retention

SOFTWARE FEATURES
• Program/Erase Suspend & Program/Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being erased - Suspends sector program operation to read data from another sector which is not being program
• Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface CFI

HARDWARE FEATURES
• Ready/Busy# RY/BY# Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset# Input
- Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability

PACKAGE
• 56-Pin TSOP
• 64-Ball FBGA 10mm x 13mm
• 64-Ball LFBGA 11mm x 13mm
• 70-Pin SSOP
• All devices are RoHS Compliant and Halogen-free

P/N:PM1500

PIN CONFIGURATION
56 TSOP

RESET#

WP#/ACC

RY/BY#

MX29GL128E

BYTE#

Q15/A-1

VI/O
64 FBGA/64 LFBGA

BYTE#

Q15/

RES-

WP#/

P/N:PM1500

MX29GL128E
70 SSOP

BYTE#

WP#/ACC

RESET#

Q15/A-1

PIN DESCRIPTION
ORDERING INFORMATION

PART NO. MX29GL128EHMC-90G * MX29GL128EHXFI-90G MX29GL128ELXFI-90G MX29GL128EHXCI-90G MX29GL128ELXCI-90G MX29GL128EHT2I-90G MX29GL128ELT2I-90G MX29GL128EUXFI-11G MX29GL128EDXFI-11G MX29GL128EUT2I-11G MX29GL128EDT2I-11G

ACCESS TIME ns 90 110

Note 70-pin SSOP only for Pachinko Socket.

MX29GL128E

PACKAGE 70 Pin SSOP
64 LFBGA 64 LFBGA 64 FBGA 64 FBGA 56 Pin TSOP 56 Pin TSOP 64 LFBGA 64 LFBGA 56 Pin TSOP 56 Pin TSOP

Remark VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC VI/O=1.65 to VCC

P/N:PM1500

MX29GL128E

PART NAME DESCRIPTION MX 29 GL 128 E H T2 I

OPTION G RoHS compliant & Halogen-free with Vcc 2.7V~3.6V

SPEED 90 90ns 11 110ns

TEMPERATURE RANGE I Industrial -40° C to 85° C Commercial 0° C to 70° C

PACKAGE T2 56-TSOP M 70SSOP XF LFBGA 11mm x 13mm XC FBGA 10mm x 13mm

PRODUCT TYPE Protection when WP#=VIL H VI/O=VCC=2.7 to 3.6V, Highest Address Sector Protected L VI/O=VCC=2.7 to 3.6V, Lowest Address Sector Protected U VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Highest Address Sector Protected D VI/O=1.65 to VCC, VCC=2.7 to 3.6V, Lowest Address Sector Protected

DENSITY & MODE 128 128Mb x8/x16 Architecture

TYPE GL 3V Page Mode

DEVICE 29:Flash

P/N:PM1500

PACKAGE INFORMATION

MX29GL128E

P/N:PM1500

MX29GL128E

P/N:PM1500

MX29GL128E

P/N:PM1500

MX29GL128E

P/N:PM1500

MX29GL128E

Added overshoot & undershoot specifications.

Removed "Preliminary".

Changed data retention from 10 years to 20 years.

Modified Tdf max. = 20ns.

Page P4 P37 P2,61 P40

Date APR/28/2009

Added 1.8V VI/O information.

P2,37,40 JUN/29/2009

P64,65

Modified Tsrw min. = 35ns.

Added Icr2 parameter and "status Polling for write buffer program" P38,56

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MX29GL128EDXFI-11G Datasheet file may be downloaded here without warranties.

Datasheet ID: MX29GL128EDXFI-11G 646957