M08888-11
Part | Datasheet |
---|---|
![]() |
M08888G-11 (pdf) |
PDF Datasheet Preview |
---|
M08888-11 High Performance RGB Driver for DLP/LCD/LCoS Projectors • Three 2A common anode LED/laser drivers • Integrated Msps 10-bit current DACs with 6-bit programmable full scale • Real-time continuous and integrating optical power control • DC-DC control circuitry • Safety circuitry • High speed 4 wire interface or I2C • DLP/LCD/LCoS Projector Systems • Backlight illumination The M08888 is a high efficiency integrated triple channel 2A LED/laser driver for LCD/LCoS/DLP projection displays. It features automatic optical power control for consistent white balance across temperature variation and light source aging. The M08888 allows for the control of an external DC-DC converter to generate optimal light sources supply and improve overall system efficiency. An internal junction temperature monitor is also available. The part can be programmed via I2C or high speed 4-wire SPI interface. M08888 Block Diagram APC_IN0 APC_IN1 APC_IN2 I0_ON I1_ON I2_ON Vref 12.4kΩ CLK_IN/ALARM/LP_MODE REGREF Analog MUX PD M08888 13bit Target DAC Internal Temp Sensor Current Comparator CPC IPC VREF Current scaling Serial Interface Controller 4 wire serial and dual I 2C Register table S__O/ADDR1 CS/ADDR0 SI/SDA_S SCK/SCL_S SerSel References _L_P___M_O_DE ALARM CLK_IN DC-DC Converter Control Timers 10bit DAC 6bit Scale DAC 10bit DAC 6bit Scale DAC 10bit DAC 6bit Scale DAC Headroom control Internal oscillator 2A Driver 2A Driver 2A Driver VLDD monitor Ordering Information Package M08888G-11 * 28 pin, mm x mm QFN M08888-11EVM Evaluation board with M08888-11 * The letter “G” designator in the part number indicates that the device is RoHS-compliant. Operating Temperature -40 °C to +85 °C -40 °C to +85 °C Level V4 E V3 D V2 C V1 B V1P Release Preliminary A V1A Advance July 2015 September 2011 August 2011 June 2011 October 2010 June 2010 Updated register references. Updated Ordering Information Add operating specifications at Tc=120°C in Tables 1-5, 1-6 and Change pin24 from DIS to GND. Update Product Specifications, Functional Descriptions and Register Descriptions Update Product Specifications, Functional Description and Register Descriptions. Swapped pinout of ADDR0 pin 19 and ADDR1 pin Initial Conventions Throughout this document, pins will be identified with italics example IOUT1 while x or X means 0,1,2 to indicate the different channels. M/A-COM Technology Solutions Inc. MACOM and its affiliates reserve the right to make changes to the product s or information contained herein without notice. Visit for additional data sheets and product information. For further information and support please visit: M08888-11 High Performance RGB Driver for DLP/LCD/LCoS Projectors Product Specification Absolute Maximum Ratings These are the absolute maximum ratings at or beyond which the IC can be expected to fail or be damaged. Reliable operation at these extremes for any length of time is not implied. Table Absolute Maximum Ratings Parameter DVDD, ALVDD DHVDD, AHVDD IOUT0, IOUT1, IOUT2 TJCTN TSTG SERSEL APC_IN0, APC_IN1, APC_IN2 IAPC_IN0, IAPC_IN1, IAPC_IN2 I_VREF I0_ON, I1_ON, I2_ON CLK_IN, CS, SI, SCLK, SO SCLK_S, SDA_S REGREF I_REGREF V Digital and Analog Voltage at pins DVDD and ALVDD V Digital and Analog Voltage at pins DVDD and ALVDD Output pins for driving LED/Laser - maximum voltage Junction Temperature Storage Temperature Serial data format select input RGB Photodiode Feedback Input Voltage RGB Photodiode Feedback Input Current into Reference Voltage Pin Enable LED/Laser output SPI inputs and output I2C interface External DC-DC converter control signal Current into or out of REGREF Rating -40 to +125 -65 to +150 to ALVDD + to 4 to DVDD to Units V °C °C V mA V mA M/A-COM Technology Solutions Inc. MACOM and its affiliates reserve the right to make changes to the product s or information contained herein without notice. Visit for additional data sheets and product information. For further information and support please visit: M08888-11 High Performance RGB Driver for DLP/LCD/LCoS Projectors DC Characteristics Min and Max values Tc= -40 °C to 85 °C, DVDD=1.8 V+/-5%, ALVDD=1.8 V+/-5%, DHVDD=3.3 V+/-5%, AHVDD V+/-5% unless otherwise noted. Typical values Tc=25 °C, DVDD=1.8 V, ALVDD=1.8 V, DHVDD V, AHVDD V unless otherwise noted. Table DC Characteristics PARAMETER CONDITIONS Min Typ Max Units DVDD ALVDD DHVDD AHVDD ILVDD V supply for digital circuitry V supply for analog circuitry V supply for digital circuitry V supply for analog circuitry V Supply Current DVDD and ALVDD 1, 2 Open Loop Closed Loop IPC IHVDD V DHVDD and AHVDD 1 Standby Current - V Closed Loop CPC Open Loop Closed Loop IPC additional to open loop current Closed Loop CPC LVPOR V SET Threshold V RESET Threshold For positive going supply For negative going supply HVPOR V SET Threshold V RESET Threshold For positive going supply For negative going supply |
More datasheets: DBMAY44S | SSM1N45BTF | DBM25PPK87 | MDM-9PH020P-A174 | 3360-3-14-80-00-00-08-0 | DCMME37PZA101 | PQ50A-14(2517) | MDM-25PH005K | TX22/14/6.4-4C65 | B158-H8576-X-0-7600 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M08888G-11 Datasheet file may be downloaded here without warranties.