SBM-160-RGBW-H41-RE102

SBM-160-RGBW-H41-RE102 Datasheet

SBM-160 LEDs

Part	Datasheet
SBM-160-RGBW-H41-RE102	SBM-160-RGBW-H41-RE102 (pdf)

PDF Datasheet Preview
SBM-160 LEDs SBM-160 Product Datasheet Table of Contents Technology Overview. 2 Test Specifications 2 White Binning Structure. 3 Chromaticity Bins. 4 Product Shipping & Labeling Information. 5 Electrical Characteristics. 5 Lifetime & Lumen Maintenance. 9 Spectral Characteristics. Radiation Patterns 10 Thermal Resistance 10 Mechanical Dimensions 11 Solder Profile 13 Ordering Information 14 Features: • Extremely high optical output up to 270 Red lumens up to 640 Green lumens up to 120 Blue lumens up to 550 White lumens • High thermal conductivity package - junction to heat sink thermal resistance as low as ºC/W per die • Photonic lattice technology for very high surface brightness and uniform emission • Four big chips with emitting area of up to 4 mm2 each • Environmentally friendly RoHS compliant • Variable drive currents less than 1 A through 4 A • Available in RGBW combination • Fiber-coupled Illumination • Architectural and Entertainment Lighting • Medical Lighting • Machine Vision • Spot Lighting • Displays and Signage PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 SBM-160 Product Datasheet Technology Overview Luminus Big Chip LEDs benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency. Photonic Lattice Technology and longer lifetimes. Luminus’ photonic lattice technology enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot. For red, green and blue LEDs, the photonic lattice structures extract more light and create radiation patterns that are more collimated than traditional LEDs. Having higher collimation from the source increases optical collection efficiencies and simplifies optical designs. Reliability Designed from the ground up, Luminus Big Chip LEDs are one of the most reliable light sources in the world today. Big Chip LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus Big Chip LEDs are ready for even the most demanding applications. Packaging Technology Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of C/W per chip. Luminus SBM-160 LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All Big Chip LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Understanding Big Chip LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products. Testing Temperature Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus Big Chip LEDs perform in the field just as they are specified. Multiple Operating Points The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions currents from less than 1A to 4A, and duty cycle from <1% to 100% , multiple drive conditions are listed. PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 SBM-160 Product Datasheet SBM-160 White Binning Structure White die of SBM-160 LEDs is tested for luminous flux and chromaticity at a drive current of A/mm2 and placed into one of the following luminous flux FF and chromaticity WW bins: Note Some flux and chromaticity bins may have limited availability. Application specific bin kits, consisting of multiple bins, may be available. For ordering information, please refer to page 14 and reference PDS-001792 SBM-160 Binning & Labeling document. Example The part number SBM-160-RGBW-H41-EA-G4 refers to a RGBW, SBM-160 emitter, with a flux range of 510-550 lumens and a chromaticity value within the box defined by the four points Parameter Drive Condition2 Current Density Forward Voltage Typical Luminous Flux4 Minimum Luminous Flux Wavelength min-max FWHM Chromaticity Coordinates5, 6 Radiometric Efficiency Optical & Electrical Characteristics I j VF min VF typ VF typ min λd x y ηrad 215 160 619-624 18 21 Green 550 400 520-530 38 Blue 90 65 450-460 24 15 White 510 440 N/A N/A 13 Unit A/mm2 V lm nm % PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 SBM-160 Product Datasheet Optical & Electrical Characteristics Characteristics Curves for Red Relative Luminus Flux % 120% 100% 80% 60% 40% 20% 0% 0 1 2 3 4 Current A Current A Forward Voltage V Note 1 Yellow squares indicate reference drive conditions Characteristics Curves for Green Relative Luminus Flux % 120% 100% 80% 60% 40% 20% 0% 0 1 2 3 4 Current A Note 1 Yellow squares indicate reference drive conditions Current A Forward Voltage V PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 SBM-160 devices are available premounted on a copper-clad MCPCB for prototyping purposes. Please see page 14 for ordering information. For a detailed drawing, refer drawing number DWG-001381 PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 SBM-160 Product Datasheet Temperature ºC Solder Profile SAC 305 Reflow Profile Window For Low Density Boards 250 225 200 175 150 125 100 75 50 25 0 30 60 90 120 150 180 210 240 270 300 Time sec Solder Profile Stage Rate of Rise Preheat Min Temp Ti,min Preheat Max Temp Ti,max Preheat Time Ti,min to Ti,max Liquidus Min Temp TL Liquidus to Liquidus Time TL to TL2 Liquidus Peak Temp Tp Cooldown Profile Length Ambient to Peak Lead-Free Solder 2ºC/sec max 100ºC 175ºC 90 seconds 185ºC 30-60 seconds 240ºC max 4ºC/sec 4 min Lead-based Solder 2ºC/sec max 120ºC 130ºC 120 seconds 160ºC 30 seconds 220ºC max 6ºC/sec - 4 min Note 1 Temperatures are taken and monitored at the component copper layer. Note 2 Optimum profile may differ due to oven type, circuit board or assembly layout. Note 3 Recommended lead free, no-clean solder AIM NC254-SAC305. Note 4 Refer to soldering and handling application note for additional solder profiles and details. PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821 SBM-160 Product Datasheet Ordering Part Number 1,2 SBM-160-RGBW-H41-RE102 SBR-160-RGBW-R41-RE102 Color RGBW Ordering Information Description SBM-160 RGBW Big Chip LED surface mount LED consisting of a red 4 mm2 LED, a green 4 mm2 LED, a blue 4 mm2 LED, a white 4 mm2 LED , tray pack SBR-160 evaluation module consisting of a SBM-160 RGBW surface mount LED mounted on a development board Note 1 SBM-160-RGBW-H41-RE102 denotes a bin kit comprising of all flux bins as listed on page 3 and chromaticity bins listed on page 3 and Note 1 For ordering information on all available bin kits, please see PDS-001792 SBM-160 Binning & Labeling document. The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDs is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries. PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved Luminus Devices, Inc. • T • 1100 Technology Park Drive • Billerica, MA 01821

PDF Datasheet Preview

SBM-160 LEDs

SBM-160 Product Datasheet

Table of Contents
Technology Overview. 2 Test Specifications 2 White Binning Structure. 3 Chromaticity Bins. 4 Product Shipping & Labeling Information. 5 Electrical Characteristics. 5 Lifetime & Lumen Maintenance. 9 Spectral Characteristics. Radiation Patterns 10 Thermal Resistance 10 Mechanical Dimensions 11 Solder Profile 13 Ordering Information 14

Features:
• Extremely high optical output up to 270 Red lumens
up to 640 Green lumens
up to 120 Blue lumens
up to 550 White lumens
• High thermal conductivity package - junction to heat sink thermal resistance as low as ºC/W per die
• Photonic lattice technology for very high surface brightness and uniform emission
• Four big chips with emitting area of up to 4 mm2 each
• Environmentally friendly RoHS compliant
• Variable drive currents less than 1 A through 4 A
• Available in RGBW combination
• Fiber-coupled Illumination
• Architectural and Entertainment

Lighting
• Medical Lighting
• Machine Vision
• Spot Lighting
• Displays and Signage

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

SBM-160 Product Datasheet

Technology Overview

Luminus Big Chip LEDs benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.

Photonic Lattice Technology
and longer lifetimes.

Luminus’ photonic lattice technology enables large area LED chips with uniform brightness over the entire LED chip surface. The optical power and brightness produced by these large monolithic chips enable solutions which replace arc and halogen lamps where arrays of traditional high power LEDs cannot.

For red, green and blue LEDs, the photonic lattice structures extract more light and create radiation patterns that are more collimated than traditional LEDs. Having higher collimation from the source increases optical collection efficiencies and simplifies optical designs.

Reliability

Designed from the ground up, Luminus Big Chip LEDs are one of the most reliable light sources in the world today. Big Chip LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus Big Chip LEDs are ready for even the most demanding applications.

Packaging Technology

Thermal management is critical in high power LED applications. With a thermal resistance from junction to heat sink of C/W per chip. Luminus SBM-160 LEDs have the lowest thermal resistance of any LED on the market. This allows the LED to be driven at higher current densities while maintaining a low junction temperature, thereby resulting in brighter solutions

Environmental Benefits

Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All Big Chip LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury.

Understanding Big Chip LED Test Specifications

Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.

Testing Temperature

Luminus core board products are typically measured in such a way that the characteristics reported agree with how the devices will actually perform when incorporated into a system. This measurement is accomplished by mounting the devices on a 40ºC heat sink and allowing the device to reach thermal equilibrium while fully powered. Only after the device reaches equilibrium are the measurements taken. This method of measurement ensures that Luminus Big Chip LEDs perform in the field just as they are specified.

Multiple Operating Points

The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions currents from less than 1A to 4A, and duty cycle from <1% to 100% , multiple drive conditions are listed.

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

SBM-160 Product Datasheet

SBM-160 White Binning Structure

White die of SBM-160 LEDs is tested for luminous flux and chromaticity at a drive current of A/mm2 and placed into one of the following luminous flux FF and chromaticity WW bins:
Note Some flux and chromaticity bins may have limited availability. Application specific bin kits, consisting of multiple bins, may be available. For ordering information, please refer to page 14 and reference PDS-001792 SBM-160 Binning & Labeling document.

Example The part number SBM-160-RGBW-H41-EA-G4 refers to a RGBW, SBM-160 emitter, with a flux range of 510-550 lumens and a chromaticity value within the box defined by the four points

Parameter Drive Condition2 Current Density

Forward Voltage

Typical Luminous Flux4 Minimum Luminous Flux Wavelength min-max FWHM Chromaticity Coordinates5, 6

Radiometric Efficiency

Optical & Electrical Characteristics

I j VF min VF typ VF typ min λd x y
ηrad
215 160 619-624 18 21

Green
550 400 520-530 38

Blue
90 65 450-460 24 15

White
510 440 N/A N/A 13

Unit

A/mm2

V lm nm %

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

SBM-160 Product Datasheet

Optical & Electrical Characteristics

Characteristics Curves for Red

Relative Luminus Flux %
120% 100%
80% 60% 40%
20% 0% 0 1 2 3 4 Current A

Current A

Forward Voltage V

Note 1 Yellow squares indicate reference drive conditions

Characteristics Curves for Green

Relative Luminus Flux %
120% 100%
80% 60% 40% 20% 0%
0 1 2 3 4 Current A

Note 1 Yellow squares indicate reference drive conditions

Current A

Forward Voltage V

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821
SBM-160 devices are available premounted on a copper-clad MCPCB for prototyping purposes. Please see page 14 for ordering information.

For a detailed drawing, refer drawing number DWG-001381

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

SBM-160 Product Datasheet

Temperature ºC

Solder Profile

SAC 305 Reflow Profile Window For Low Density Boards
250 225 200 175 150 125 100
75 50 25 0
30 60
90 120 150 180 210 240 270 300 Time sec

Solder Profile Stage Rate of Rise Preheat Min Temp Ti,min Preheat Max Temp Ti,max Preheat Time Ti,min to Ti,max Liquidus Min Temp TL Liquidus to Liquidus Time TL to TL2 Liquidus Peak Temp Tp Cooldown Profile Length Ambient to Peak

Lead-Free Solder 2ºC/sec max 100ºC 175ºC 90 seconds 185ºC 30-60 seconds 240ºC max 4ºC/sec 4 min

Lead-based Solder 2ºC/sec max 120ºC 130ºC 120 seconds 160ºC 30 seconds 220ºC max 6ºC/sec - 4 min

Note 1 Temperatures are taken and monitored at the component copper layer. Note 2 Optimum profile may differ due to oven type, circuit board or assembly layout. Note 3 Recommended lead free, no-clean solder AIM NC254-SAC305. Note 4 Refer to soldering and handling application note for additional solder profiles and details.

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

SBM-160 Product Datasheet
Ordering Part Number 1,2 SBM-160-RGBW-H41-RE102 SBR-160-RGBW-R41-RE102

Color RGBW
Ordering Information

Description SBM-160 RGBW Big Chip LED surface mount LED consisting of a red 4 mm2 LED, a green 4 mm2 LED, a blue 4 mm2 LED, a white 4 mm2 LED , tray pack

SBR-160 evaluation module consisting of a SBM-160 RGBW surface mount LED mounted on a development board
Note 1 SBM-160-RGBW-H41-RE102 denotes a bin kit comprising of all flux bins as listed on page 3 and chromaticity bins listed on page 3 and Note 1 For ordering information on all available bin kits, please see PDS-001792 SBM-160 Binning & Labeling document.

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. Big Chip LEDs is a registered trademark of Luminus Devices, Inc., all rights reserved.

This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries.

PDS-001432Rev 04 2011 Luminus Devices, Inc. - All Rights Reserved

Luminus Devices, Inc.
• T
• 1100 Technology Park Drive
• Billerica, MA 01821

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SBM-160-RGBW-H41-RE102 Datasheet file may be downloaded here without warranties.

Datasheet ID: SBM-160-RGBW-H41-RE102 646692