PT-120-R-C11-MPB
Part | Datasheet |
---|---|
![]() |
PT-120-B-C11-EPD (pdf) |
Related Parts | Information |
---|---|
![]() |
PT-120-R-C11-MPB |
![]() |
PT-120-RA-C11-MPF |
![]() |
PT-120-G-C11-MPE |
![]() |
PT-120-R-C11-MPC |
![]() |
PT-120-G-C11-MPD |
![]() |
PT-120-G-C11-MPB |
![]() |
PT-120-G-C11-MPC |
![]() |
PT-120-R-C11-MPD |
![]() |
PT-120-B-C11-EPB |
![]() |
PT-120-B-C11-EPA |
![]() |
PT-120-B-C11-EPC |
PDF Datasheet Preview |
---|
SUMMARY DATA SHEET PhlatLight PT120 Projection Chipset Technology Overview Luminus Devices’ Projection Technology is an innovative solidstate light source created to replace arc lamps in projection systems. Enabled by unique use of Photonic Lattice technology, PhlatLight chipsets represent a major breakthrough in brightness that delivers all the benefits of solid state light sources in projections applications: - Wide color gamut for vivid colors, exceeds NTSC. - Instant turn-on, no more wait time. - High Reliability no lamp replacement - Environmentally friendly technology - Mercury-free. - Electronic control of color points and light intensity on a frame by frame basis PhlatLight products benefit from numerous innovations in the domain of packaging, thermal management and optical coupling that allow designers to achieve efficient light engine designs and deliver high screen brightness. Angular Intensity Distribution- Example GR EEN , B LU E RED Optical Power Arbitrary Unit -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle degrees • Matched RGB Chipset with 12mm2 emitting area designed for projection applications • Photonic lattice technology for very high surface brightness • 100% surface emission for high collection efficiency and low optical losses • Wide color gamut RED 623 nm, GREEN 525 nm, BLUE 462 nm, EP Blue 460nm typical dominant wavelength • Single emitting area per color allows for collection with sin- gle lens for simplified optics • 16:9 aspect ratio matched with micro-display and screen as- pect ratio • Thermally efficient Type CX Common Anode package • RoHS lead-free compliant • Specifically engineered for Rear-Projection Displays, front projectors, head-up projection displays • Optimized for Micro-Display diagonal sizes ranging from to with 16:9 aspect ratio. • Suitable for DLP e.g. xHD5, 1080p , LCoS, HTPS and 3LCD microdisplays Optical and Electrical Characteristics Symbol Red Bin Kit Emitting Area Emitting Area Dimensions 4.6x2.6 Characteristics at recommended Pulsed Drive Current IF2,3 Reference Duty Cycle4 Recommended Peak Drive Current 5 Peak Luminous Flux6 30 1800 Peak Radiometric Power λdmin Dominant Wavelength λdmax FWHM - Spectral bandwidth at 50% of Color Saturation7,8 Chromaticity Coordinates7,8 EP-Blue is recommended for new designs. Please see page 9 for part ordering numbers. All ratings are based on operation with a constant heat sink temperature Ths = 40ºC. See Thermal Resistance section for Ths definition. Parameters rated at typical duty cycle and Pulsed operation frequency f>240Hz; DC= -tT Duty Cycle used to specify device ratings under Pulsed operation. PhlatLight devices can operate at duty cycles ranging from 1% to At higher duty cycles, drive current should be adjusted to maintain the junction temperature at desired levels to meet the application lifetime requirements. In pulsed operation, rise time from 10 to 90% of forward current should be larger than microseconds. For Blue and EP-Blue devices, total flux from emitting area at typical dominant wavelength at recommended peak drive current conditions. In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1 For Reference only Assuming Tj<80ºC for Red devices and Tj<115ºC for Blue devices and Tj<125ºC for Green devices 2010 Luminus Devices, Inc. - All Rights Reserved Page 3 Absolute Maximum Ratings Maximum Current1,2 Maximum Operating Junction Temperature3 Storage Temperature Range Green Blue EP-Blue Unit Tjmax -40/+100 -40/+100 -40/+100 -40/+100 Note 1: Note 2 Note 3: Luminus PhlatLight LEDs are designed for operation to an absolute maximum forward drive current density of 2.5A/mm2 cw, and 3A/mm2 pulsed f>240Hz, duty cycle < Please refer to absolute maximum rating table above for specific absolute maximum currents for the products covered in this datasheet. Product lifetime data is specified at recommended forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the lifetime derating curves available from Luminus for further information. In pulsed operation, rise time from 10 to 90% of forward current should be larger than microseconds. Sustained operation at Maximum Operating Junction Temperature Tjmax will result in reduced device life time. Luminous Flux variation with Wavelength = f λd at Recommended Operating Current IF 2000 1800 1600 1400 1200 1000 800 600 400 200 618 620 622 624 626 628 630 λd nm 4000 3500 3000 2500 2000 1500 1000 500 0 515 520 525 530 535 λd nm 1400 1200 1000 450 452 454 456 458 460 462 464 466 468 470 λd nm See note 1 on page 2010 Luminus Devices, Inc. - All Rights Reserved Page 4 Luminous Flux variation with Drive Current - = f IF - Typical 2000 1500 1000 0 5 10 15 20 25 30 35 IF A 4000 3500 3000 2500 2000 1500 1000 500 0 5 10 15 20 25 30 35 IF A 1000 0 5 10 15 20 25 30 35 IF A See notes 1,2 on page Ordering Information Device Part Number PT-120-R-C11-MPB PT-120-G-C11-MPB PT-120-B-C11-MPB1 PT-120-B-C11-EPA2 Color Red Green Blue EP-Blue Bin Kit MPB Red PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Bin Kit MPB Green PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Bin Kit MPB Blue PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Bin Kit EPA Blue PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Note 1 Not recommended for new designs Note 2 Bin Kit EPA Blue is recommended for new designs. The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. is a registered trademark of Luminus Devices, Inc., all rights reserved. This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries. 2010 Luminus Devices, Inc. - All Rights Reserved Page 9 |
More datasheets: 1109 | MA190 | MDM-9PH006F | VMK90-02T2 | FZL4146GGEGHUMA1 | DDMZ50PZK87 | DCE37SA197 | PT-120-R-C11-MPB | PT-120-RA-C11-MPF | PT-120-G-C11-MPE |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PT-120-B-C11-EPD Datasheet file may be downloaded here without warranties.