PT-120-B-C11-EPC

PT-120-B-C11-EPC Datasheet


PT-120-R-C11-MPB

Part Datasheet
PT-120-B-C11-EPC PT-120-B-C11-EPC PT-120-B-C11-EPC (pdf)
Related Parts Information
PT-120-R-C11-MPB PT-120-R-C11-MPB PT-120-R-C11-MPB
PT-120-RA-C11-MPF PT-120-RA-C11-MPF PT-120-RA-C11-MPF
PT-120-G-C11-MPE PT-120-G-C11-MPE PT-120-G-C11-MPE
PT-120-B-C11-EPD PT-120-B-C11-EPD PT-120-B-C11-EPD
PT-120-R-C11-MPC PT-120-R-C11-MPC PT-120-R-C11-MPC
PT-120-G-C11-MPD PT-120-G-C11-MPD PT-120-G-C11-MPD
PT-120-G-C11-MPB PT-120-G-C11-MPB PT-120-G-C11-MPB
PT-120-G-C11-MPC PT-120-G-C11-MPC PT-120-G-C11-MPC
PT-120-R-C11-MPD PT-120-R-C11-MPD PT-120-R-C11-MPD
PT-120-B-C11-EPB PT-120-B-C11-EPB PT-120-B-C11-EPB
PT-120-B-C11-EPA PT-120-B-C11-EPA PT-120-B-C11-EPA
PDF Datasheet Preview
SUMMARY DATA SHEET

PhlatLight PT120 Projection Chipset

Technology Overview

Luminus Devices’ Projection Technology is an innovative solidstate light source created to replace arc lamps in projection systems. Enabled by unique use of Photonic Lattice technology, PhlatLight chipsets represent a major breakthrough in brightness that delivers all the benefits of solid state light sources in projections applications:
- Wide color gamut for vivid colors, exceeds NTSC.
- Instant turn-on, no more wait time.
- High Reliability no lamp replacement
- Environmentally friendly technology - Mercury-free.
- Electronic control of color points and light intensity on a frame by frame basis

PhlatLight products benefit from numerous innovations in the domain of packaging, thermal management and optical coupling that allow designers to achieve efficient light engine designs and deliver high screen brightness.

Angular Intensity Distribution- Example

GR EEN , B LU E RED

Optical Power Arbitrary Unit
-100 -80 -60 -40 -20 0
20 40 60 80 100

Angle degrees
• Matched RGB Chipset with 12mm2 emitting area designed for projection applications
• Photonic lattice technology for very high surface brightness
• 100% surface emission for high collection efficiency and low
optical losses
• Wide color gamut RED 623 nm, GREEN 525 nm, BLUE 462
nm, EP Blue 460nm typical dominant wavelength
• Single emitting area per color allows for collection with sin-
gle lens for simplified optics
• 16:9 aspect ratio matched with micro-display and screen as-
pect ratio
• Thermally efficient Type CX Common Anode package
• RoHS lead-free compliant
• Specifically engineered for Rear-Projection Displays, front projectors, head-up projection displays
• Optimized for Micro-Display diagonal sizes ranging from to with 16:9 aspect ratio.
• Suitable for DLP e.g. xHD5, 1080p , LCoS, HTPS and 3LCD microdisplays

Optical and Electrical Characteristics

Symbol Red

Bin Kit

Emitting Area

Emitting Area Dimensions
4.6x2.6

Characteristics at recommended Pulsed Drive Current IF2,3

Reference Duty Cycle4

Recommended Peak Drive Current 5 Peak Luminous Flux6
30 1800

Peak Radiometric Power
λdmin

Dominant Wavelength
λdmax

FWHM - Spectral bandwidth at 50% of Color Saturation7,8

Chromaticity Coordinates7,8
EP-Blue is recommended for new designs. Please see page 9 for part ordering numbers. All ratings are based on operation with a constant heat sink temperature Ths = 40ºC. See Thermal Resistance section for Ths definition.

Parameters rated at typical duty cycle and Pulsed operation frequency f>240Hz;

DC= -tT

Duty Cycle used to specify device ratings under Pulsed operation. PhlatLight devices can operate at duty cycles ranging from 1% to At higher duty cycles, drive current should be adjusted to maintain the junction temperature at desired levels to meet the application lifetime requirements.

In pulsed operation, rise time from 10 to 90% of forward current should be larger than microseconds. For Blue and EP-Blue devices, total flux from emitting area at typical dominant wavelength at recommended peak drive current conditions. In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1 For Reference only Assuming Tj<80ºC for Red devices and Tj<115ºC for Blue devices and Tj<125ºC for Green devices
2010 Luminus Devices, Inc. - All Rights Reserved Page 3

Absolute Maximum Ratings

Maximum Current1,2 Maximum Operating Junction Temperature3 Storage Temperature Range

Green

Blue

EP-Blue Unit

Tjmax
-40/+100 -40/+100 -40/+100 -40/+100

Note 1:

Note 2 Note 3:

Luminus PhlatLight LEDs are designed for operation to an absolute maximum forward drive current density of 2.5A/mm2 cw, and 3A/mm2 pulsed f>240Hz, duty cycle < Please refer to absolute maximum rating table above for specific absolute maximum currents for the products covered in this datasheet. Product lifetime data is specified at recommended forward drive currents. Sustained operation at absolute maximum currents will result in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the lifetime derating curves available from Luminus for further information. In pulsed operation, rise time from 10 to 90% of forward current should be larger than microseconds. Sustained operation at Maximum Operating Junction Temperature Tjmax will result in reduced device life time.

Luminous Flux variation with Wavelength = f λd at Recommended Operating Current IF
2000 1800 1600 1400 1200 1000
800 600 400 200
618 620 622 624 626 628 630 λd nm
4000 3500 3000 2500 2000 1500 1000
500 0
515 520 525 530 535 λd nm
1400
1200
1000
450 452 454 456 458 460 462 464 466 468 470
λd nm

See note 1 on page
2010 Luminus Devices, Inc. - All Rights Reserved Page 4

Luminous Flux variation with Drive Current - = f IF - Typical
2000
1500
1000
0 5 10 15 20 25 30 35 IF A
4000 3500 3000 2500 2000 1500 1000
500 0 5
10 15 20 25 30 35 IF A
1000
0 5 10 15 20 25 30 35 IF A

See notes 1,2 on page
Ordering Information

Device Part Number

PT-120-R-C11-MPB

PT-120-G-C11-MPB

PT-120-B-C11-MPB1

PT-120-B-C11-EPA2

Color

Red Green Blue EP-Blue

Bin Kit MPB Red PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Bin Kit MPB Green PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Bin Kit MPB Blue PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB Bin Kit EPA Blue PhlatLight PT120 device consisting of a 12mm2 LED, thermistor and connector mounted on a type CX copper-core PCB

Note 1 Not recommended for new designs Note 2 Bin Kit EPA Blue is recommended for new designs.

The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. is a registered trademark of Luminus Devices, Inc., all rights reserved.

This product is protected by U.S. Patents 6,831,302 7,074,631 7,083,993 7,084,434 7,098,589 7,105,861 7,138,666 7,166,870 7,166,871 7,170,100 7,196,354 7,211,831 7,262,550 7,274,043 7,301,271 7,341,880 7,344,903 7,345,416 7,348,603 7,388,233 7,391,059 Patents Pending in the U.S. and other countries.
2010 Luminus Devices, Inc. - All Rights Reserved Page 9
More datasheets: PT-120-RA-C11-MPF | PT-120-G-C11-MPE | PT-120-B-C11-EPD | PT-120-R-C11-MPC | PT-120-G-C11-MPD | PT-120-G-C11-MPB | PT-120-G-C11-MPC | PT-120-R-C11-MPD | PT-120-B-C11-EPB | PT-120-B-C11-EPA


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PT-120-B-C11-EPC Datasheet file may be downloaded here without warranties.

Datasheet ID: PT-120-B-C11-EPC 646689