TSM600-250-RA-2
TSM600-250-RA-2 Datasheet
PRODUCT TSM600-250-RA
| Part | Datasheet |
|---|---|
TSM600-250-RA-2 |
TSM600-250-RA-2 (pdf) |
| PDF Datasheet Preview |
|---|
| 308 Constitution Drive Menlo Park, CA 94025-1164 Phone 800-227-4856 PTC Devices Overcurrent Protection Device Raychem Circuit Protection Products PRODUCT TSM600-250-RA Specification Status RELEASED Max Electrical Rating at 20°C Operating Voltage 250VDC Interrupt Current 3ARMS Fault Voltage 600VRMS Lead Material Tin plated brass Configuration Two PPTC devices per TSM600 part Case Material Nylon Resin UL94 V-0 1000V dielectric rating Marking: TSM600 Raychem Logo Part Identification Lot Identification Terminal Description T1 = Tip In T4 = Tip Out R2 = Ring In R3 = Ring Out Not to be used for new designs. For new designs please use TSM600-250F-RA TABLE I. DIMENSIONS: MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX TABLE II. PERFORMANCE RATINGS 20°C unless otherwise noted : IHOLD A RESISTANCE Ω ** 20° C TIME TO TRIP Seconds 20°C 60°C R MIN R TYP R1 MAX* * Maximum device resistance, measured 1-hour post reflow or post trip. ** Resistance per PPTC device. OPERATING TEMPERATURE °C Tripped State Power Dissipation 250V Watts TYPICAL Additional Ratings 20°C Resistance Matched: Ohm measured 24 hours after Storage Temperature -40° to 85° C reflow installation Line Balance: |
| More datasheets: 76650-0058 | IRPLPFC1 | 1893BYI-10LF | ICS1893BY-10T | 1893BYI-10LFT | ICS1893BYI-10T | 1893BY-10LF | ICS1893BY-10 | 1893BY-10LFT | ICS1893BYI-10 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TSM600-250-RA-2 Datasheet file may be downloaded here without warranties.