AK10-200C

AK10-200C Datasheet

AK10 Series

Part	Datasheet
AK10-200C	AK10-200C (pdf)

Related Parts	Information
AK10-250C	AK10-250C

PDF Datasheet Preview
Silicon Avalanche Diodes SILICON DIODE ARRAYS AK10 Series The new AK10 series of high current transient suppressors have been specially designed for use in A.C. Line Protection and any demanding applications AC or DC .They offer superior clamping characteristics over standard S.A.D. technologies by virtue of the Littelfuse Foldbak technology, which provides a clamping voltage which is lower than the avalanche voltage but above the rated working voltage therefore any voltage rise due to increased current conduction is contained to a minimum, providing the best possible protection level. They can also be connected in series and/or parallel to create very high capacity protection solutions. Maximum Ratings • Current Rating IPP 10KA see note 1 • Maximum Junction Temp. is 150°C • Storage Temp. -55°C to 175°C • Rated IPP measured with 8 x 20 µsec pulse Mechanical Characteristics • Epoxy Encapsulated • Axial lead terminals solderable per MIL-STD-202 Method 208 • Device code and logo marked on every device Features • Foldbak technology for superior clamping factor. 1.27mm 10.0mm max AK10 -170 16.5mm max AK10 -380 • Glass Passivated Junction • Bi-directional • Multijunction • Very Low Clamping Voltage Max = 12.7mm SQ 24mm lead centres • Sharp Breakdown Voltage • Low Slope Resistance Agency Approvals Recognized under the Components Program of Underwriters Laboratories - UL497B. Agency File Numbers E128662 ELECTRICAL SPECIFICATION Tamb 25°C Par t Numbers AK10-58 Standoff Voltage VS O Volts Max Reser vse Leakage IR VS O Min. Max Volts Test Cur r e n t Max Clamping

PDF Datasheet Preview

Silicon Avalanche Diodes

SILICON DIODE ARRAYS

AK10 Series

The new AK10 series of high current transient suppressors have
been specially designed for use in A.C. Line Protection and any
demanding applications AC or DC .They offer superior clamping
characteristics over standard S.A.D. technologies by virtue of the

Littelfuse Foldbak technology, which provides a clamping
voltage which is lower than the avalanche voltage but above the
rated working voltage therefore any voltage rise due to
increased current conduction is contained to a minimum,
providing the best possible protection level. They can also be
connected in series and/or parallel to create very high capacity
protection solutions.

Maximum Ratings
• Current Rating IPP 10KA see note 1
• Maximum Junction Temp. is 150°C
• Storage Temp. -55°C to 175°C
• Rated IPP measured with 8 x 20 µsec pulse Mechanical Characteristics
• Epoxy Encapsulated
• Axial lead terminals solderable per MIL-STD-202 Method 208
• Device code and logo marked on every device Features
• Foldbak technology for superior clamping factor.
1.27mm
10.0mm max AK10 -170
16.5mm max AK10 -380
• Glass Passivated Junction
• Bi-directional
• Multijunction
• Very Low Clamping Voltage

Max = 12.7mm SQ
24mm lead centres
• Sharp Breakdown Voltage
• Low Slope Resistance

Agency Approvals Recognized under the Components Program of Underwriters Laboratories - UL497B.

Agency File Numbers E128662

ELECTRICAL SPECIFICATION Tamb 25°C

Par t Numbers

AK10-58

Standoff Voltage

VS O Volts

Max Reser vse Leakage IR VS O

Min. Max Volts

Test Cur r e n t

Max Clamping

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AK10-200C Datasheet file may be downloaded here without warranties.

Datasheet ID: AK10-200C 646426