LTW-77HC4

LTW-77HC4 Datasheet

Part No. LTW-77HC4

Part	Datasheet
LTW-77HC4	LTW-77HC4 (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. Package Dimensions Part No. LTW-77HC4 Lens Color Water Clear Emitted Color InGaN White NOTES All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTW-77HC4 BNS-OD-C131/A4 Page 1 of 8 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at PARAMETER MAXIMUM RATING UNIT Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Electrostatic Discharge Threshold HBM Note A 1000 Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm .063" From Body] for 5 Seconds Note A Product resistance to electrostatic discharge ESD according to the HBM is measured by simulating ESD using a rapid avalanche test RAET . The RAET procedures are designed to approximate the maximum ESD ratings shown. The RAET procedure is performed on each die. The ESD classification of Class II is based on sample testing according to MIL-STD 883E. From CREE official DS . Part No. LTW-77HC4 BNS-OD-C131/A4 Page 2 of 8 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Luminous Intensity Viewing Angle IF = 20mA Note 1,2,3 Iv Spec. Table Note 4 Chromaticity Coordinates IF = 20mA Note 5 Hue Spec. Table & Chromaticity Diagram

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement.

Package Dimensions

Part No. LTW-77HC4

Lens Color Water Clear

Emitted Color InGaN White

NOTES All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTW-77HC4

BNS-OD-C131/A4

Page 1 of 8

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at

PARAMETER

MAXIMUM RATING

UNIT

Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current

Electrostatic Discharge Threshold HBM Note A
1000

Operating Temperature Range

Storage Temperature Range

Lead Soldering Temperature [1.6mm .063" From Body]
for 5 Seconds

Note A Product resistance to electrostatic discharge ESD according to the HBM is measured by simulating ESD using a rapid avalanche test RAET . The RAET procedures are designed to approximate the maximum ESD ratings shown. The RAET procedure is performed on each die. The ESD classification of Class II is based on sample testing according to MIL-STD 883E. From CREE official DS .

Part No. LTW-77HC4

BNS-OD-C131/A4

Page 2 of 8

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at

PARAMETER

SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION

Luminous Intensity Viewing Angle

IF = 20mA

Note 1,2,3

Iv Spec. Table

Note 4

Chromaticity Coordinates

IF = 20mA Note 5

Hue Spec. Table & Chromaticity Diagram

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTW-77HC4 Datasheet file may be downloaded here without warranties.

Datasheet ID: LTW-77HC4 646296