LTL1CHTBJ3A

LTL1CHTBJ3A Datasheet

Part No. LTL1CHTBJ3A

Part	Datasheet
LTL1CHTBJ3A	LTL1CHTBJ3A (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * mm diameter package. Package Dimensions Part No. LTL1CHTBJ3A Lens White Diffused Source Color InGaN Blue Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL1CHTBJ3A BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm .063" From Body] Maximum Rating Unit -25°C to + 80°C -30°C to + 100°C 260°C for 5 Seconds Part No. LTL1CHTBJ3A BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity Viewing Angle IF = 20mA mcd Note 1,5 deg Note 2 Fig.6 Peak Emission Wavelength Dominant Wavelength Measurement nm Fig.1 nm Note 3 Spectral Line Half-Width Forward Voltage V IF = 20mA uA VR = 5V NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * mm diameter package.

Package Dimensions

Part No. LTL1CHTBJ3A

Lens White Diffused

Source Color InGaN Blue

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL1CHTBJ3A BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25℃

Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm .063" From Body]

Maximum Rating

Unit
-25°C to + 80°C
-30°C to + 100°C
260°C for 5 Seconds

Part No. LTL1CHTBJ3A BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25℃

Parameter

Symbol Min.

Typ.

Max. Unit Test Condition

Luminous Intensity Viewing Angle

IF = 20mA mcd

Note 1,5 deg Note 2 Fig.6

Peak Emission Wavelength

Dominant Wavelength

Measurement
nm Fig.1
nm Note 3

Spectral Line Half-Width

Forward Voltage

V IF = 20mA
uA VR = 5V

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL1CHTBJ3A Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL1CHTBJ3A 646019