LTL-4221NLC

LTL-4221NLC Datasheet

Part No. LTL-4221NLC

Part	Datasheet
LTL-4221NLC	LTL-4221NLC (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only * Lead Pb free product RoHS compliant. * High efficiency. * Low power consumption. * CMOS/MOS compatible. * TTL compatible. * Wide viewing angle. Package Dimensions Part No. LTL-4221NLC Lens Red Diffused Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. The LED lamp original is LTL-4221NLC Part No. LTL-4221NLC-002 BNS-OD-C131/A4 Source Color Hi-Eff.Red Page 1 of 11 LITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Maximum Rating Unit -55℃ to + 100℃ -55℃ to + 100℃ 260℃ for 5 Seconds Max. Part No. LTL-4221NLC-002 BNS-OD-C131/A4 Page 2 of 11 LITE-ON TECHNOLOGY CORPORATION. Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width Symbol IV λP λd Min. Typ. Max. Unit Test Condition IF = 2mA 50 mcd Note 1,4 deg Note 2 Fig.6 Measurement Fig.1 nm Note 3 V IF = 2mA 10 uA VR = 5V Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. The Iv guarantee should be added ±15% Part No. LTL-4221NLC-002 BNS-OD-C131/A4 Page 3 of 11 LITE-ON TECHNOLOGY CORPORATION.

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION.

Property of Lite-On Only
* Lead Pb free product RoHS compliant. * High efficiency. * Low power consumption. * CMOS/MOS compatible. * TTL compatible. * Wide viewing angle.

Package Dimensions

Part No. LTL-4221NLC

Lens Red Diffused

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. The LED lamp original is LTL-4221NLC

Part No. LTL-4221NLC-002 BNS-OD-C131/A4

Source Color Hi-Eff.Red

Page 1 of 11

LITE-ON TECHNOLOGY CORPORATION.

Property of Lite-On Only

Absolute Maximum Ratings at TA=25℃

Maximum Rating

Unit
-55℃ to + 100℃
-55℃ to + 100℃
260℃ for 5 Seconds Max.

Part No. LTL-4221NLC-002 BNS-OD-C131/A4

Page 2 of 11

LITE-ON TECHNOLOGY CORPORATION.

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25℃

Parameter Luminous Intensity Viewing Angle Peak Emission Wavelength Dominant Wavelength Spectral Line Half-Width

Symbol IV
λP λd

Min. Typ. Max. Unit Test Condition

IF = 2mA 50 mcd

Note 1,4
deg Note 2 Fig.6

Measurement

Fig.1
nm Note 3

V IF = 2mA
10 uA VR = 5V

Note Luminous intensity is measured with a light sensor and filter combination that approximates the CIE Commission International De L'Eclairage eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device. The Iv guarantee should be added ±15%

Part No. LTL-4221NLC-002 BNS-OD-C131/A4

Page 3 of 11

LITE-ON TECHNOLOGY CORPORATION.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL-4221NLC Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL-4221NLC 645959