HSDL-3200#021

HSDL-3200#021 Datasheet

HSDL-3200 Data Compliant Kb/s Infrared Transceiver

Part	Datasheet
HSDL-3200#021	HSDL-3200#021 (pdf)

PDF Datasheet Preview
HSDL-3200 Data Compliant Kb/s Infrared Transceiver Data Sheet The HSDL-3200 is a new generation of low-cost Infrared IR transceiver module from Lite-On Technology. It features the smallest footprint in the industry at H x W x D mm. The supply voltage can range from V to V. The LED drive current of 25 mA assures that link distances meet the IrDA Data low power physical layer specification. The HSDL-3200 meets the link distance of 20 cm to other low power devices, and 30 cm to standard 1 meter IrDA devices. R1 47 8 LEDA TXD 7 TXD LED DRIVER RXD 6 RXD SHUT DOWN 5 SD 4 AGND C1 µF C2 100 nF 3 VCC 2 CX RIX PULSE SHAPER 1 GND SHIELD • Fully compliant to IrDA data low power specifications • Ultra small package • Minimal height mm • to VCC • Low shutdown current 10 nA Typical • Complete shutdown TXD, RXD, PIN diode • Three external components • Temperature performance guaranteed, to +85°C • 25 mA LED drive current • Integrated EMI shield • IEC825-1 Class 1 eye safe • Edge detection input Prevents the LED from long turn-on time • Lead-free and RoHS compliant • Mobile telecom Cellular phones Pagers Smart phones • Data communication PDAs Portable printers • Digital imaging Digital cameras Photo-imaging printers • Electronic wallet HSDL-3200#021 Pinout 87654321 HSDL-3200-028 Pinout 87654321 I/O Pins Configuration Table Ground Pin Bypass Capacitor Supply Voltage Analog Ground Shut Down Receiver Data Output Transmitter Data Input LED Anode Symbol GND CX VCC AGND SD RXD TXD LEDA Note The shutdown pin SD must be driven either high or low. Do NOT float the pin. Active Ordering Information The ordering information is as shown in the table below. There are two options available. Front Option #021 Taped and 13” Reel packaging, 2500 per reel Top Option Taped and 13” Reel Packaging, 2500 per reel Recommended Application Circuit Components Component Recommended Value Note 47 ± 1%, Watt µF, ± 20%, Tantalum 100 nF, ± 20%, X7R Ceramic Note C1 must be placed within cm of the HSDL-3200 to obtain optimum noise immunity. Caution The BiCMOS inherent to this design of this component increases the component’s susceptibility to damage from electrostatic discharge ESD . It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Absolute Maximum Ratings For implementations where case to ambient thermal resistance 50°C/W. Parameter Min. Max. Storage Temperature Operating Temperature DC LED Current ILED DC Peak LED Current ILED PK LED Anode Voltage VLEDA Supply Voltage Input Voltage TXD, SD Output Voltage RXD 7 VCC Units °C °C mA Conditions 90 µs Pulse Width, Duty Cycle Recommended Operating Conditions Parameter Min. Operating Temperature Supply Voltage

PDF Datasheet Preview

HSDL-3200 Data Compliant Kb/s Infrared Transceiver

Data Sheet

The HSDL-3200 is a new generation of low-cost Infrared IR transceiver module from Lite-On Technology. It features the smallest footprint in the industry at H x W x D mm. The supply voltage can range from V to V. The LED drive current of 25 mA assures that link distances meet the IrDA Data low power physical layer specification.

The HSDL-3200 meets the link distance of 20 cm to other low power devices, and 30 cm to standard 1 meter IrDA devices.

R1 47
8 LEDA

TXD 7 TXD

LED DRIVER

RXD 6 RXD SHUT DOWN 5 SD
4 AGND

C1 µF

C2 100 nF
3 VCC 2 CX

RIX PULSE SHAPER
1 GND

SHIELD
• Fully compliant to IrDA data low power specifications
• Ultra small package
• Minimal height mm
• to VCC
• Low shutdown current
10 nA Typical
• Complete shutdown

TXD, RXD, PIN diode
• Three external components
• Temperature performance guaranteed, to +85°C
• 25 mA LED drive current
• Integrated EMI shield
• IEC825-1 Class 1 eye safe
• Edge detection input

Prevents the LED from long turn-on time
• Lead-free and RoHS compliant
• Mobile telecom Cellular phones Pagers Smart phones
• Data communication PDAs Portable printers
• Digital imaging Digital cameras Photo-imaging printers
• Electronic wallet

HSDL-3200#021 Pinout
87654321

HSDL-3200-028 Pinout
87654321

I/O Pins Configuration Table

Ground

Pin Bypass Capacitor

Supply Voltage

Analog Ground

Shut Down

Receiver Data Output

Transmitter Data Input

LED Anode

Symbol GND CX VCC AGND SD RXD TXD LEDA

Note The shutdown pin SD must be driven either high or low. Do NOT float the pin.

Active
Ordering Information
The ordering information is as shown in the table below. There are two options available.

Front Option
#021

Taped and 13” Reel packaging, 2500 per reel

Top Option

Taped and 13” Reel

Packaging, 2500 per reel

Recommended Application Circuit Components

Component

Recommended Value

Note
47 ± 1%, Watt
µF, ± 20%, Tantalum
100 nF, ± 20%, X7R Ceramic

Note C1 must be placed within cm of the HSDL-3200 to obtain optimum noise immunity.

Caution The BiCMOS inherent to this design of this component increases the component’s susceptibility to damage from electrostatic discharge ESD . It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

Absolute Maximum Ratings

For implementations where case to ambient thermal resistance 50°C/W.

Parameter

Min.

Max.

Storage Temperature

Operating Temperature

DC LED Current

ILED DC

Peak LED Current

ILED PK

LED Anode Voltage

VLEDA

Supply Voltage

Input Voltage TXD, SD

Output Voltage RXD
7 VCC

Units °C °C mA

Conditions
90 µs Pulse Width, Duty Cycle

Recommended Operating Conditions

Parameter

Min.

Operating Temperature

Supply Voltage

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSDL-3200#021 Datasheet file may be downloaded here without warranties.

Datasheet ID: HSDL-3200#021 645811