LTL2R3TGK

LTL2R3TGK Datasheet

Part No. LTL2R3TGK

Part	Datasheet
LTL2R3TGK	LTL2R3TGK (pdf)

PDF Datasheet Preview
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * Popular T-13/4 diameter. Package Dimensions Part No. LTL2R3TGK Lens Water Clear Source Color InGaN Green Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice. Part No. LTL2R3TGK BNS-OD-C131/A4 Page 1 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25°C Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm .063" From Body] Maximum Rating Unit -25°C to + 80°C -30°C to + 100°C 260°C for 5 Seconds Part No. LTL2R3TGK BNS-OD-C131/A4 Page 2 of 10 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25°C Parameter Luminous Intensity Viewing Angle Symbol IV Min. 2500 Typ. 8000 20 Max. Unit Test Condition 18800 IF = 20mA mcd Note 1,5 deg Note 2 Fig.6 Dominant Wavelength nm Note 3 Spectral Line Half-Width Forward Voltage V IF = 20mA µA VR = 5V NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single

PDF Datasheet Preview

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only
* Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * Popular T-13/4 diameter.

Package Dimensions

Part No. LTL2R3TGK

Lens Water Clear

Source Color InGaN Green

Notes All dimensions are in millimeters inches . Tolerance is ±0.25mm .010" unless otherwise noted. Protruded resin under flange is 1.0mm .04" max. Lead spacing is measured where the leads emerge from the package. Specifications are subject to change without notice.

Part No. LTL2R3TGK BNS-OD-C131/A4

Page 1 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Absolute Maximum Ratings at TA=25°C

Parameter Power Dissipation Peak Forward Current 1/10 Duty Cycle, 0.1ms Pulse Width DC Forward Current Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6mm .063" From Body]

Maximum Rating

Unit
-25°C to + 80°C
-30°C to + 100°C
260°C for 5 Seconds

Part No. LTL2R3TGK BNS-OD-C131/A4

Page 2 of 10

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Electrical / Optical Characteristics at TA=25°C

Parameter Luminous Intensity Viewing Angle

Symbol IV

Min. 2500

Typ. 8000 20

Max. Unit Test Condition
18800

IF = 20mA mcd

Note 1,5
deg Note 2 Fig.6

Dominant Wavelength
nm Note 3

Spectral Line Half-Width

Forward Voltage

V IF = 20mA
µA VR = 5V

NOTE Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.
is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LTL2R3TGK Datasheet file may be downloaded here without warranties.

Datasheet ID: LTL2R3TGK 646040