ANT-916-PMB

ANT-916-PMB Datasheet

ANT-868/916-PMB DATA SHEET

Part	Datasheet
ANT-916-PMB	ANT-916-PMB (pdf)

PDF Datasheet Preview
ANT-868/916-PMB DATA SHEET Product Dimensions 8-32 UNC Thread PMB Series antennas combine a soft blade-type element with a rugged package that is resistant to damage and abuse. The antenna features a molded tab that allows coding of the product’s enclosure to control 360-degree rotational travel. The PMB mounts to a PCB via one or two screws and meets Part 15 requirements. Low cost Soft blade-type element Rotates 360 degrees Omni-directional pattern Weather resistant Flexible main shaft Damage resistant Screw-mount Electrical Specifications Center Freq. Covers 868MHz and 902 - 928MHz Bandwidth 200MHz Wavelength 1/4-wave VSWR <2 typ. at center Impedance 50 ohms Connection Screw-mount 6-32 UNC Screw included Electrical specifications and plots measured on x reference ground plane Ordering Information ANT-868/916-PMB VSWR Graph Polar Plot & Gain Information S11 SWR 1 CENTER 868.000MHz 2 CENTER 916.000MHz SPAN 248.000MHz Typical VSWR Monopole antenna gain and radiation patterns are dependant on the ground plane and layout of the end product. Since antenna manufacturers do not measure on standardized ground references, comparison of published specifications is an unreliable indication of actual antenna performance in an end product. Optimum full-wave ground planes are impractical for the majority of products on which these antennas are used the ground plane for 916MHz would be in diameter, 418MHz would be in diameter . For this reason, Antenna Factor tests and tunes antennas on reduced-size, compromised ground planes. To avoid mis-comparison or inappropriate application, gain and polar plots do not appear on this data sheet, but are available upon request for most products. Antenna Factor 159 Ort Lane Merlin, OR 97532 541-956-0931 phone 541-471-6251 fax

PDF Datasheet Preview

ANT-868/916-PMB DATA SHEET

Product Dimensions
8-32 UNC Thread

PMB Series antennas combine a soft blade-type element with a rugged package that is resistant to damage and abuse. The antenna features a molded tab that allows coding of the product’s enclosure to control 360-degree rotational travel. The PMB mounts to a PCB via one or two screws and meets Part 15 requirements.

Low cost Soft blade-type element Rotates 360 degrees Omni-directional pattern Weather resistant Flexible main shaft Damage resistant Screw-mount

Electrical Specifications

Center Freq. Covers 868MHz and 902 - 928MHz

Bandwidth 200MHz

Wavelength 1/4-wave

VSWR
<2 typ. at center

Impedance 50 ohms

Connection Screw-mount 6-32 UNC Screw included

Electrical specifications and plots measured on x reference ground plane
Ordering Information

ANT-868/916-PMB

VSWR Graph

Polar Plot & Gain Information

S11 SWR
1 CENTER 868.000MHz 2 CENTER 916.000MHz

SPAN 248.000MHz

Typical VSWR

Monopole antenna gain and radiation patterns are dependant on the ground plane and layout of the end product. Since antenna manufacturers do not measure on standardized ground references, comparison of published specifications is an unreliable indication of actual antenna performance in an end product. Optimum full-wave ground planes are impractical for the majority of products on which these antennas are used the ground plane for 916MHz would be in diameter, 418MHz would be in diameter . For this reason, Antenna Factor tests and tunes antennas on reduced-size, compromised ground planes. To avoid mis-comparison or inappropriate application, gain and polar plots do not appear on this data sheet, but are available upon request for most products.

Antenna Factor 159 Ort Lane Merlin, OR 97532 541-956-0931 phone 541-471-6251 fax

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ANT-916-PMB Datasheet file may be downloaded here without warranties.

Datasheet ID: ANT-916-PMB 645761