520082-02
520082-02 Datasheet
| Part | Datasheet |
|---|---|
520082-02 |
520082-02 (pdf) |
| PDF Datasheet Preview |
|---|
| Innovative Technology for a Connected World MTTC-1410 User Manual The MTTC-1410 Thermoelectric Temperature Controller is a precision instrument that utilizes Pulse Width Modulation PWM control technology to provide accurate temperature control of thermoelectric devices. The MTTC-1410 is a bi directional controller with selectable voltage output and a full “H” bridge capable of load currents of up to ten amperes. The unit’s LED front control panel can be used to adjust the setpoint temperature, to view the current temperature, or to fine-tune the control parameters for higher accuracy or faster response. Specifications and features • Input Power 110 1.5A /220VAC 0.8A , 50~60Hz • Range of selectable DC output voltages 3, 7, 12, and 14 VDC PWM • Maximum Output Current 10A • Control temperature range -100°C to 200°C • Control stability 0.1°C/24h • Temperature sensor 2 wire Pt1000 RTD included • Control output Proportional control with automatic reset and rate PID , 500 Hz Pulse Width Modulation PWM • Dimensions 15cm x 12.5cm x 26cm • digit LED display, 4 button user interface • Extra terminals for constant 12VDC fan operation up to 1 Ampere Available ranges for settings Item Display Setpoint Proportional band P0001 Integral reset time A0001 Derivative rate time D0001 Calibration offset C00.01 1 Number shown only as an example of the display. 2 will show as in the display. Range 0 20 0 250 0 100 Units °C % Seconds global solutions local support TM Americas Europe Asia: MTTC-1410 Temperature Controller User Manual Product handling Do not operate this unit before reading this manual. The MTTC-1410 was designed, built, and packaged to withstand the shock and vibration normally associated with shipment by common carriers. Occasionally, improper handling during shipment, such as excessive vibration, crushing, etc., will cause damage to the product. Therefore, a thorough inspection should be provided upon receipt of all shipments. Any packaging tears, dents, scratches, or loose objects are signs of damage and should be noted on the Freight Bill. Packages should be opened promptly and units inspected for concealed damage. If damage is found, an immediate claim must be filed with the freight carrier and an inspection requested. Retain all packing materials. Laird Technologies cannot be responsible for the Consignee’s failure to file a timely freight claim. WARNING Electrical Shock Hazard A. ENSURE THAT THERE IS A CIRCUIT BREAKER ON THE LINE AND THAT IT COMPLIES WITH UNIT’S ELECTRICAL REQUIREMENTS. B. PLUG UNIT INTO GROUNDED ELECTRICAL OUTLET ONLY. C. IF THE ELECTRICAL SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY A CORD WITH AN EQUAL OR HIGHER RATING. D. UNPLUG THE POWER CORD BEFORE TURNING THE REAR PANEL VOLTAGE ADJUSTMENT KNOB OR CHANGING THE FUSE. Failure to follow the above precautions could result in electrical shock, fire, personal injury, or damage to the unit, and will void the warranty. Getting Started Temperature Sensor Input AC Input Receptacle AC Power On/Off Switch |
| More datasheets: MDM-31SH003P | 71035-505 | 71035-506 | HSS-L2C-101-GO | HSS-1222-GO | HSS-1595-GO | 68664-008 | 68664-006 | 68664-002 | BSO051N03MS G |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 520082-02 Datasheet file may be downloaded here without warranties.