HSS-L2C-101-GO

HSS-L2C-101-GO Datasheet

MAGNASPHERE expands its L2 series HSS product line to include

Part	Datasheet
HSS-L2C-101-GO	HSS-L2C-101-GO (pdf)

Related Parts	Information
HSS-1222-GO	HSS-1222-GO
HSS-1595-GO	HSS-1595-GO

PDF Datasheet Preview
MAGNASPHERE expands its L2 series HSS product line to include of next generation sensors that meet and exceed UL634 Level 2 High Security Standard for installations where concealed sensors are desired for both security and aesthetics. ULI HIGH SECURITY LEVEL 2 CUL HIGH SECURITY THE INSIDER THREAT IS REAL. Experts agree that the most devastating threats to government and corporate security have come from employees who were deemed trusted insiders. Armed with simple magnets unscrupulous insiders can disable even triple-balanced BMS magnetic contacts while the system is unarmed, and enter undetected at a later time, leaving no evidence of tamper. MAGNASPHERE L2C HSS Technology Only concealed contact to meet UL 634 Level 2 High Security Standard Incorporates patented removal pry tamper circuit Installs in one inch diameter hole or standard ANSI door cut out ANSI model a retrofit / upgrade to old 2757 / 67 BMS contacts American made, built with MAGNASPHERE switch technology Resists permanent contact welding power surges, stun guns, lightning Single and dual alarm contacts available Compatible with all control panels Highest level of security for every installation Competitively priced MAGNASPHERE CORP. CONSTRUCTION AND TECHNICAL SPECIFICATIONS L2C-XXX-A ANSI Cut Out Housing Brass Max Current A Resistive Max Power W Max Voltage 30 VDC Max Actuation Gap * Single or Dual Closed Loop Contacts Hermetically Sealed Switch Contacts Wire Lead Type Solid Color-Coded Lead Wires, 22 AWG TAMPER BRACKET Fully Epoxy Potted Assembly Operating Temperature -40° C to +80°C Suitable for Indoor Use Intended for Connection to UL Listed Compatible Control Panels Removal Tamper Circuit Closed Loop PATENTED DESIGN #RE 39731, #6603378, # 7944334 & Other Patents Pending SWITCH MODULE " MAGNET MODULE 2x #8 4 7/8 " 3 1/2 " 1/8 " " TYP. 1/4 " 2x #8 B * for UL624 Level 2 installation 1/8 " " 1/4 " 1/32" SPACER s AS NEEDED P/N 1317 Detail B Corp. provides superior performing magnetic contact sensor technology for the residential, commercial, and federal government security markets. The HSS’s leading-edge technology aims to set new industry standards for high security sensors while providing an affordable and more effective alternative to reed-based security contacts. To learn more about the L2 HSS High Security Sensor visit or call MAGNASPHERE CORP. \| 03-2012 L2S-XXX-A-SCHM DRAFT CONSTRUCTION AND TECHNICAL SPECIFICATIONS L2C-XXX 1” Diameter Concealed Housing Switch ABS, Magnet - Brass Max Current A Resistive Max Power W Max Voltage 30 VDC Max Actuation Gap * Single or Dual Closed Loop Contacts Hermetically Sealed Switch Contacts Wire Lead Type Solid Color-Coded Lead Wires, 22 AWG

PDF Datasheet Preview

MAGNASPHERE expands its L2 series HSS product line to include
of next generation sensors that meet and exceed UL634 Level 2 High Security Standard
for installations where concealed sensors are desired for both security and aesthetics.

ULI HIGH SECURITY LEVEL 2 CUL HIGH SECURITY

THE INSIDER THREAT IS REAL. Experts agree that the most devastating threats to government and corporate security have come from employees who were deemed trusted insiders. Armed with simple magnets unscrupulous insiders can disable even triple-balanced BMS magnetic contacts while the system is unarmed, and enter undetected at a later time, leaving no evidence of tamper.

MAGNASPHERE L2C HSS Technology

Only concealed contact to meet UL 634 Level 2 High Security Standard

Incorporates patented removal pry tamper circuit

Installs in one inch diameter hole or standard ANSI door cut out

ANSI model a retrofit / upgrade to old 2757 / 67 BMS contacts

American made, built with MAGNASPHERE switch technology

Resists permanent contact welding power surges, stun guns, lightning

Single and dual alarm contacts available

Compatible with all control panels

Highest level of security for every installation

Competitively priced

MAGNASPHERE CORP.

CONSTRUCTION AND TECHNICAL SPECIFICATIONS L2C-XXX-A ANSI Cut Out

Housing Brass Max Current A Resistive Max Power W Max Voltage 30 VDC Max Actuation Gap * Single or Dual Closed Loop Contacts Hermetically Sealed Switch Contacts Wire Lead Type Solid Color-Coded Lead Wires, 22 AWG

TAMPER BRACKET

Fully Epoxy Potted Assembly Operating Temperature -40° C to +80°C Suitable for Indoor Use Intended for Connection to UL Listed Compatible Control Panels Removal Tamper Circuit Closed Loop

PATENTED DESIGN #RE 39731, #6603378, # 7944334 & Other Patents Pending

SWITCH MODULE "

MAGNET MODULE
2x #8
4 7/8 "
3 1/2 "
1/8 " " TYP.
1/4 "
2x #8

B * for UL624 Level 2 installation
1/8 "
" 1/4 "
1/32" SPACER s AS NEEDED

P/N 1317

Detail B

Corp. provides superior performing magnetic contact sensor technology for the residential, commercial, and federal government security markets. The HSS’s leading-edge technology aims to set new industry standards for high security sensors while providing an affordable and more effective alternative to reed-based security contacts.

To learn more about the L2 HSS High Security Sensor visit or call

MAGNASPHERE CORP. | 03-2012 L2S-XXX-A-SCHM DRAFT

CONSTRUCTION AND TECHNICAL SPECIFICATIONS L2C-XXX 1” Diameter Concealed

Housing Switch ABS, Magnet - Brass Max Current A Resistive Max Power W Max Voltage 30 VDC Max Actuation Gap * Single or Dual Closed Loop Contacts Hermetically Sealed Switch Contacts Wire Lead Type Solid Color-Coded Lead Wires, 22 AWG

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HSS-L2C-101-GO Datasheet file may be downloaded here without warranties.

Datasheet ID: HSS-L2C-101-GO 646973