CZ500-020S

CZ500-020S Datasheet

• CoolZorb T 500 series no charge absorber samples 4”X4” use the following designation when ordering CZ500-XXXS where XXX is thickness of absorber in thousands of an inch

Part	Datasheet
CZ500-020S	CZ500-020S (pdf)

PDF Datasheet Preview
Americas Europe Asia: Hybrid Thermal/EMI Absorber CoolZorb T 500 Series HYBRID THERMAL/EMI ABSORBER CoolZorb T 500 is a thin version hybrid absorber, thermal management material that is used for borh heat transfer and EMI mitigation. CoolZorb T 500 product is used like a traditional thermal interface material between heat source such as an IC and heat sink or other heat transfer device or metal chassis and also functions to suppress unwanted energy coupling, resonances or surface currents causing board level EMI issues. • Designed specifically for thin applications less than 1mm • Silicone gel binder imparts inherent tack typical of thermal gap fillers • Filler particles impart good thermal conductivity and excellent EMI suppression in the microwave frequency range • CoolZorb T 500 passes UL 94 V0 requirements • Does not require adhesive when used like a traditional thermal interface material VALUE • Lower BOM and Design cost - Reduces EMI issues due to capacitive coupling of heat sinks • Lower BOM and Design cost - Dual function improves design, assembly, cost of ownership • Customer Perceived Value - Improved reliability performance of electronics o Better signal integrity due to reduction of EMI o Consistent performance of electronics due to temperature stability and low outgassing properties of product • Time to Market - Improved EMC performance / lower cost to meet compliance • Corporate Social Responsibility - Environmentally friendly solution that meets regulatory requirements including RoHS and REACH directives TYPICAL PROPERTIES Color Thermal conductivity Density Hardness 3 sec Tensile strength Temperature Range UL Flammability Volume resistivity Outgassing TML Outgassing CVCM Coefficient of Thermal Expansion CTE EMI Attenuation 10 GHz EMI Attenuation 18 GHz Standard Thickness range Thickness Tolerance DATA Dark gray 4.0W/m-K g/cc 75 Shore 00 psi -40°C to 175°C UL 94 V-0 x 1013 Ω*cm pending um/mC dB/cm dB/cm - 0.5-0.75mm +/- 10% of nominal TEST METHOD Visual ASTM D5470 ASTM D792 ASTM D2240 ASTM D638 NA UL ASTM D257 ASTM E595-07 ASTM E595-07 IPC-TM-650 Hybrid Thermal/EMI Absorber CoolZorb T 500 Thermal resistance at 50C ASTM D5470 CoolZorb T 500 Percent Deflection ASTM D575 CoolZorb Deflection Comparison ASTM D575 CoolZorb Attenuation dB/cm AVAILABILITY • Standard sheet size is 18” X 18” • Thickness availability range is - 0.5mm- 0.75mm • Common standards for thickness are 0.020”and thickness 0.5mm and 0.75mm • No charge samples are available in 4” X 4” size for each of the above common thicknesses PART NUMBER SYSTEM • CoolZorb T 500 series absorber sheets 18”X18” use the following designation when ordering A17554-XXX where XXX is thickness of absorber in thousands of an inch • CoolZorb T 500 series no charge absorber samples 4”X4” use the following designation when ordering CZ500-XXXS where XXX is thickness of absorber in thousands of an inch • Example A17554-020 = CoolZorb T 500, 0.020”X18”X18” sheet size Example CZ500-030S = CoolZorb T 500, 0.030”X4”X4” no charge sample size RFP-DS-COOLZORB T 500 010518 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

PDF Datasheet Preview

Americas Europe Asia:

Hybrid Thermal/EMI Absorber

CoolZorb T 500 Series

HYBRID THERMAL/EMI ABSORBER

CoolZorb T 500 is a thin version hybrid absorber, thermal management material that is used for borh heat transfer and EMI mitigation. CoolZorb T 500 product is used like a traditional thermal interface material between heat source such as an IC and heat sink or other heat transfer device or metal chassis and also functions to suppress unwanted energy coupling, resonances or surface currents causing board level EMI issues.
• Designed specifically for thin applications less than 1mm
• Silicone gel binder imparts inherent tack typical of thermal gap fillers
• Filler particles impart good thermal conductivity and excellent EMI suppression in the
microwave frequency range
• CoolZorb T 500 passes UL 94 V0 requirements
• Does not require adhesive when used like a traditional thermal interface material

VALUE
• Lower BOM and Design cost - Reduces EMI issues due to capacitive coupling of heat sinks
• Lower BOM and Design cost - Dual function improves design, assembly, cost of ownership
• Customer Perceived Value - Improved reliability performance of electronics
o Better signal integrity due to reduction of EMI o Consistent performance of electronics due to temperature stability and
low outgassing properties of product
• Time to Market - Improved EMC performance / lower cost to meet compliance
• Corporate Social Responsibility - Environmentally friendly solution that meets regulatory
requirements including RoHS and REACH directives

TYPICAL PROPERTIES

Color Thermal conductivity Density Hardness 3 sec Tensile strength Temperature Range UL Flammability Volume resistivity Outgassing TML Outgassing CVCM Coefficient of Thermal Expansion CTE EMI Attenuation 10 GHz EMI Attenuation 18 GHz Standard Thickness range

Thickness Tolerance

DATA

Dark gray 4.0W/m-K g/cc 75 Shore 00 psi -40°C to 175°C UL 94 V-0 x 1013 Ω*cm pending um/mC dB/cm dB/cm - 0.5-0.75mm +/- 10% of nominal

TEST METHOD

Visual ASTM D5470 ASTM D792 ASTM D2240 ASTM D638 NA UL ASTM D257 ASTM E595-07 ASTM E595-07 IPC-TM-650

Hybrid Thermal/EMI Absorber

CoolZorb T 500 Thermal resistance at 50C ASTM D5470

CoolZorb T 500 Percent Deflection ASTM D575

CoolZorb Deflection Comparison ASTM D575

CoolZorb Attenuation dB/cm

AVAILABILITY
• Standard sheet size is 18” X 18”
• Thickness availability range is - 0.5mm- 0.75mm
• Common standards for thickness are 0.020”and thickness 0.5mm and 0.75mm
• No charge samples are available in 4” X 4” size for each of the above common thicknesses

PART NUMBER SYSTEM
• CoolZorb T 500 series absorber sheets 18”X18” use the following designation when ordering A17554-XXX where XXX is thickness of absorber in thousands of an inch
• CoolZorb T 500 series no charge absorber samples 4”X4” use the following designation when ordering CZ500-XXXS where XXX is thickness of absorber in thousands of an inch
• Example A17554-020 = CoolZorb T 500, 0.020”X18”X18” sheet size Example CZ500-030S = CoolZorb T 500, 0.030”X4”X4” no charge sample size

RFP-DS-COOLZORB T 500 010518

Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end
user. Laird Technologies makes no warranties as to the fitness, merchantability, suitability or non- infringement of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. Copyright 2015 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CZ500-020S Datasheet file may be downloaded here without warranties.

Datasheet ID: CZ500-020S 645150