WP154A4SEJ3VBDZGW/CA

WP154A4SEJ3VBDZGW/CA Datasheet

Part Number WP154A4SEJ3VBDZGW/CA Hyper Red Blue Green

Part	Datasheet
WP154A4SEJ3VBDZGW/CA	WP154A4SEJ3VBDZGW/CA (pdf)

PDF Datasheet Preview
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES z Uniform light output. z Low power consumption. z Long life-solid state reliability. z RoHS compliant. Package Dimensions T-1 3/4 5mm FULL COLOR LED LAMP Part Number WP154A4SEJ3VBDZGW/CA Hyper Red Blue Green The Hyper Red device is based on light emitting diode chip made from AlGaInP. The Blue source color devices are made with InGaN Light Emitting Diode. The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Lead spacing is measured where the leads emerge from the package. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO DSAN1168 APPROVED WYNEC DATE JUL/24/2013 DRAWN Q.M.Chen PAGE 1 OF 8 ERP 1101031384 Selection Guide Dice Lens Type Hyper Red AlGaInP WP154A4SEJ3VBDZGW/CA Blue InGaN White Diffused Green InGaN Notes is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. Luminous intensity/ luminous Flux * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Parameter Device Typ. λpeak Peak Wavelength Hyper Red Blue Green λD [1] Dominant Wavelength Hyper Red Blue Green Hyper Red Spectral Line Half-width Blue Green Capacitance Hyper Red Blue Green

PDF Datasheet Preview

ATTENTION

OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
z Uniform light output. z Low power consumption. z Long life-solid state reliability. z RoHS compliant.

Package Dimensions

T-1 3/4 5mm FULL COLOR LED LAMP

Part Number WP154A4SEJ3VBDZGW/CA Hyper Red Blue Green

The Hyper Red device is based on light emitting diode chip made from AlGaInP. The Blue source color devices are made with InGaN Light Emitting Diode. The Green source color devices are made with InGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.

Notes All dimensions are in millimeters inches . Tolerance is unless otherwise noted. Lead spacing is measured where the leads emerge from the package. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

SPEC NO DSAN1168 APPROVED WYNEC

DATE JUL/24/2013 DRAWN Q.M.Chen

PAGE 1 OF 8 ERP 1101031384

Selection Guide

Dice

Lens Type

Hyper Red AlGaInP

WP154A4SEJ3VBDZGW/CA Blue InGaN

White Diffused

Green InGaN

Notes is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. Luminous intensity/ luminous Flux * Luminous intensity value is traceable to the CIE127-2007 compliant national standards.

Electrical / Optical Characteristics at TA=25°C

Parameter

Device

Typ.
λpeak

Peak Wavelength

Hyper Red

Blue

Green
λD [1]

Dominant Wavelength

Hyper Red

Blue

Green

Hyper Red

Spectral Line Half-width

Blue

Green

Capacitance

Hyper Red

Blue

Green

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived WP154A4SEJ3VBDZGW/CA Datasheet file may be downloaded here without warranties.

Datasheet ID: WP154A4SEJ3VBDZGW/CA 644867