MX8682RTR

MX8682RTR Datasheet

MX8682

Part	Datasheet
MX8682RTR	MX8682RTR (pdf)

Related Parts	Information
MX8682R	MX8682R

PDF Datasheet Preview
IXYS MX8682 12-Bit Digital Output Magnetic Flux Sensor ±100 Gauss / 2KHz Conversion Rate Features: • Higher Sensitivity Version of the MX8681 • Single 5 Volt Power Supply • Externally Configurable ±10A Bi-Direction Current Sense per Turn • 12-Bit Serial Digital Output • Full Scale Magnetic Flux Intensity of ±100 Gauss • 2K Conversions/Second • Microcontroller Compatible • Standard 3 Wire Serial Interface plus Chip Select • In System Calibration OTP Full Scale Trim via the Serial I/O Port • Programmable Digital Filter Time Constant • 4mm x 4mm 8 Lead DFN package RoHS Compliant Applications: • Load Detection and Management • Motor Control • Power Supplies The MX8682 is a 12 Bit Digital Output Magnetic Flux Sensor. The device is a complete sampled data subsystem that converts a magnetic flux intensity of ±100 Gauss full scale into a 12-bit digital output word. The sensor operates as a slave on the serial interface with TTL-level compatible inputs SDI serial data input , SCK serial clock , and CS* chip select, active low . Terminal SDO is the tri-state serial data output. An adjustable exponentially weighted moving average digital filter is included that is capable of improving the signal to noise ratio while reducing the signal bandwidth. The full scale trim and/or the digital filter time constant are controllable through the serial I/O interface and are one-time programmable through the serial interface once programmed, the values are loaded at every poweron . The MX8682 can be mounted onto a PCB or incorporated into a magnetic assembly and then calibrated in-system through the serial interface. The operating voltage range is 4.5V to 5.5V. Ordering Information MX8682R DFN-8 Tube MX8682RTR DFN-8 Tape & Reel Qty 91 2500 Functional Block Diagram Typical Application Circuit PWR GND Hall Plate I/O Reg A/D SDI SCK SDO CS* Power MISO Select Microcontroller MOSI SCK Ground 1 PWR 2 SDO CS* MX8682 5 SDI 4 SCK GND 7 MX8682 Drawing No. 0868209 03/03/08 MX8682 Absolute Maximum Ratings TA = +25°C unless otherwise noted Parameter Min Max Unit Voltage Any Pin to GND DFN-8 Package 30 °C/W Operating Temperature Range -40 +85 °C Storage Temperature Range -65 150 °C IXYS ESD Warning ESD electrostatic discharge sensitive device. Although the MX8681 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Electrical Characteristics PWR= 5V, T = +25°C Parameter Operating Voltage Range PWR Supply Current IPWR Average A/D Reading Average A/D Reading Output Noise SCK pulse period SCK pulse width CS* pulse period CS* falling to first SCK rising Last SCK falling to CS* rising SCK falling to SDO valid Digital output high Digital output low Digital input low Digital input high Digital input current Condition Zero Magnetic Flux 50 Gauss, North Pole

PDF Datasheet Preview

IXYS

MX8682
12-Bit Digital Output Magnetic Flux Sensor ±100 Gauss / 2KHz Conversion Rate

Features:
• Higher Sensitivity Version of the MX8681
• Single 5 Volt Power Supply
• Externally Configurable ±10A Bi-Direction

Current Sense per Turn
• 12-Bit Serial Digital Output
• Full Scale Magnetic Flux Intensity of ±100

Gauss
• 2K Conversions/Second
• Microcontroller Compatible
• Standard 3 Wire Serial Interface plus Chip

Select
• In System Calibration OTP Full Scale Trim via
the Serial I/O Port
• Programmable Digital Filter Time Constant
• 4mm x 4mm 8 Lead DFN package RoHS

Compliant

Applications:
• Load Detection and Management
• Motor Control
• Power Supplies

The MX8682 is a 12 Bit Digital Output Magnetic Flux Sensor. The device is a complete sampled data subsystem that converts a magnetic flux intensity of ±100 Gauss full scale into a 12-bit digital output word. The sensor operates as a slave on the serial interface with TTL-level compatible inputs SDI serial data input , SCK serial clock , and CS* chip select, active low . Terminal SDO is the tri-state serial data output.

An adjustable exponentially weighted moving average digital filter is included that is capable of improving the signal to noise ratio while reducing the signal bandwidth. The full scale trim and/or the digital filter time constant are controllable through the serial I/O interface and are one-time programmable through the serial interface once programmed, the values are loaded at every poweron .

The MX8682 can be mounted onto a PCB or incorporated into a magnetic assembly and then calibrated in-system through the serial interface. The operating voltage range is 4.5V to 5.5V.
Ordering Information

MX8682R DFN-8 Tube

MX8682RTR DFN-8 Tape & Reel

Qty 91 2500

Functional Block Diagram Typical

Application Circuit

PWR GND

Hall Plate

I/O Reg A/D

SDI SCK SDO CS*

Power

MISO Select Microcontroller MOSI SCK

Ground
1 PWR
2 SDO

CS* MX8682
5 SDI
4 SCK GND 7

MX8682

Drawing No. 0868209
03/03/08

MX8682

Absolute Maximum Ratings TA = +25°C unless otherwise noted

Parameter

Min Max Unit

Voltage Any Pin to GND

DFN-8 Package
30 °C/W

Operating Temperature Range -40 +85 °C

Storage Temperature Range
-65 150 °C

IXYS

ESD Warning

ESD electrostatic discharge sensitive device. Although the MX8681 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.

Electrical Characteristics

PWR= 5V, T = +25°C

Parameter Operating Voltage Range PWR Supply Current IPWR Average A/D Reading Average A/D Reading

Output Noise

SCK pulse period SCK pulse width CS* pulse period CS* falling to first SCK rising Last SCK falling to CS* rising SCK falling to SDO valid Digital output high Digital output low Digital input low Digital input high Digital input current

Condition

Zero Magnetic Flux 50 Gauss, North Pole

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MX8682RTR Datasheet file may be downloaded here without warranties.

Datasheet ID: MX8682RTR 644422