DBM21W1PR

DBM21W1PR Datasheet

DBM21W1PR

Part	Datasheet
DBM21W1PR	DBM21W1PR (pdf)

PDF Datasheet Preview
This is issued in strict confidence on condition that it is not used as a basis for manufacture or sale, and that it is not copied, reprinted or disclosed to a third party either wholly or in part without prior written consent of ITT Cannon. No mounting hardware selected with 3,05 mounting hole Signal contacts not shown for clarity A ± 0,38 B ± 0,13 C ± 0,13 D ± 0,13 E ± 0,38 L ± 0,25 W ± 0,41 K ± 0,25 53,04 38,96 47,04 8,36 12,55 0,99 6,84 1,52 Right angle signal contacts Signal contact diameter Y ± 0,04 0,76 Signal contact length from bottom edge of shell X ± 0,69 4,65 DESCRIPTION Insulator Shells Signal Contacts MATERIAL Polyester Steel Copper alloy FINISH None, Color Black Yellow Chromate over Zinc Gold over Ni No Hardware Specified Mounting Holes Ref Only PCB Signal cont Ø 20 1,14 NOTE DO NOT MAKE ASSUMPTIONS REGARDING HOLE LOCATIONS, CHECK EACH DIMENSION Config Rev Unless otherwise specified, dimensions are in mm & in. Tolerances are .XXX = mm Decimals Angles .X ± 0,20 Xo ± 1.0o .XX ± 0,10 .XXX ± 0,05 Issue Date 22-Jul-15 CONNECTOR, PLUG, ELECTRICAL COMBO D 21W1 RIGHT ANGLE PCB DBM21W1PR Customer Use Drawing

PDF Datasheet Preview

This is issued in strict confidence on condition that it is not used as a basis for manufacture or sale, and that it is not copied, reprinted or disclosed to a third party either wholly or in part without prior written consent of ITT Cannon.

No mounting hardware selected with 3,05 mounting hole

Signal contacts not shown for clarity

A ± 0,38 B ± 0,13 C ± 0,13 D ± 0,13 E ± 0,38 L ± 0,25 W ± 0,41 K ± 0,25 53,04 38,96 47,04 8,36 12,55 0,99 6,84 1,52

Right angle signal contacts

Signal contact diameter Y ± 0,04 0,76

Signal contact length from bottom edge of shell X ± 0,69 4,65

DESCRIPTION Insulator Shells Signal Contacts

MATERIAL Polyester Steel

Copper alloy

FINISH None, Color Black Yellow Chromate over Zinc

Gold over Ni

No Hardware Specified Mounting Holes Ref Only

PCB Signal cont Ø 20 1,14

NOTE DO NOT MAKE ASSUMPTIONS REGARDING HOLE LOCATIONS, CHECK EACH DIMENSION

Config Rev

Unless otherwise specified, dimensions are in mm & in.

Tolerances are .XXX = mm

Decimals

Angles
.X ± 0,20 Xo ± 1.0o
.XX ± 0,10
.XXX ± 0,05

Issue Date 22-Jul-15

CONNECTOR, PLUG, ELECTRICAL COMBO D 21W1 RIGHT ANGLE PCB

DBM21W1PR

Customer Use Drawing

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DBM21W1PR Datasheet file may be downloaded here without warranties.

Datasheet ID: DBM21W1PR 640726