CA3100R22-18PBF80

CA3100R22-18PBF80 Datasheet

Datasheet for part number CA3100R22-18PBF80

Part	Datasheet
CA3100R22-18PBF80	CA3100R22-18PBF80 (pdf)

PDF Datasheet Preview
Datasheet for part number CA3100R22-18PBF80 Our Catalog Part Number CA3100R22-18P-B-F80 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Resistance Size 15/15S/16/16S Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths Min Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 15/15S/16/16S Gage Coupling Torque Contact Retention Size 15/15S/16/16S Shell Material Shell Plating Insulator and Gromet Material Contact Material Harnessing Info Contact Cross-Section Harnessing Info Insulator Diameter Wire Stripping Size 15/15S/16/16S General Info Connector with bayonet coupling Wall mounting receptacle Shortened light-weight endbell without cable clamp Pin 22-18 8 contacts size 16 AWG Crimp Hard silver no 6 mΩ In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min 1,0 N For infos on Gage please see catalog VG95234, part 1 Closing 11 Nm max / Opening 0,8 Nm min Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy See assembly instruction See assembly instruction 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change.

PDF Datasheet Preview

Datasheet for part number CA3100R22-18PBF80

Our Catalog Part Number CA3100R22-18P-B-F80 Brand Cannon Product Category Circular Product Line CA Bayonet Series CA BAYONET

Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C 68 °F Size 15/15S/16/16S Contact Resistance Size 15/15S/16/16S

Operating Voltage

Insulator Resistance

Test Voltage Air and Creepage Paths Min

Ambient Temperature

Safety Provisions

Salt Spray Resistance Mating Cycles Sep. Force per Contact Size 15/15S/16/16S

Gage

Coupling Torque Contact Retention Size 15/15S/16/16S Shell Material Shell Plating Insulator and Gromet Material Contact Material

Harnessing Info Contact Cross-Section

Harnessing Info Insulator Diameter

Wire Stripping Size 15/15S/16/16S

General Info

Connector with bayonet coupling Wall mounting receptacle Shortened light-weight endbell without cable clamp Pin 22-18 8 contacts size 16 AWG Crimp Hard silver no
6 mΩ

In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC Acc. To VG95319, part 2, test no. and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 1600 Vrms 1,1 mm Standard insulator material -55°/+125°C -67/257°F IP67 acc. to DIN 40 050 1 bar pressure after 12 hrs 500 hours salt spray resistant 500 min
1,0 N

For infos on Gage please see catalog VG95234, part 1 Closing 11 Nm max / Opening 0,8 Nm min

Aluminium alloy Olive drab chromate over cadmium plating CR-Elastomere Copper alloy

See assembly instruction

See assembly instruction
6,2 mm

All tests in accordance with VG95319 and/or if applicable with VG95210

Specifications and dimensions subject to change.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CA3100R22-18PBF80 Datasheet file may be downloaded here without warranties.

Datasheet ID: CA3100R22-18PBF80 639553