IS480P

IS480P Datasheet

IS480P

Part	Datasheet
IS480P	IS480P (pdf)

PDF Datasheet Preview
ISOCOM COMPONENTS IS480P The IS480P High Speed Photocoupler contains a AlGaAs LED and Photo detector with built-in Schmitt Trigger to provide logic-compatible waveforms, eliminating the need for additional wave shaping. The totem pole output eliminates the need for a pull up resistor and allows for direct Intelligent Power Module Drive or Gate Drive. Minimized Propagation Delay difference between devices makes this photocoupler excellent solutions for improving inverter efficiency through reduced switching dead time. The device is in Stretched SO6 package. • Totem Pole Output • Wide Operating Voltage Range VCC 4.5V to 30V • Operating Temperature Range - 40°C to +105°C • Performance specified for Common IPM Applications over Industrial Temperature range. • Maximum Propagation Delays tPLH / tPHL 200ns / 220ns • Propagation Delay Difference Min / Max -210ns / 210ns • Maximum Pulse Width Distortion PWD 120ns • Hysteresis • 20kV/us Minimum Common Mode Rejection at VCM 1500V • Lead Free and RoHS Compliant • Safety Approvals Pending • Isolated IGBT/MOSFET Gate Drive • IPM Interface Isolation • Industrial Inverters • AC Brushless and DC Motor Drives • Digital Isolation ORDER INFORMATION • Supply in Tape & Reel 1 Anode 2 NC 3 Cathode 4 GND 5 VO 6 VCC A 0.1uF bypass Capacitor must be connected between Pins 6 and ABSOLUTE MAXIMUM RATINGS TA = 25°C Stresses exceeding the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for long periods of time can adversely affect reliability. Input Forward Current Forward Peak Current Pulse Width < 1us, 300pps 10mA 1.0A Output Output Current Output Voltage Supply Voltage 50mA -0.5V to 35V Total Package Isolation Voltage Total Power Dissipation Operating Temperature Storage Temperature Lead Soldering Temperature 10s 5000VRMS 145mW -40 to 105 °C -55 to 125 °C 260°C ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate Hartlepool, Cleveland, TS25 1PE, United Kingdom Tel +44 0 1429 863 609 Fax +44 0 1429 863 581 e-mail: 1 21/09/2016 ISOCOM COMPONENTS ASIA LTD Hong Kong Office, Block A, 8/F, Wah Hing Industrial mansion, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong. Tel +852 2995 9217 Fax +852 8161 6292 e-mail DC93200 ISOCOM COMPONENTS

PDF Datasheet Preview

ISOCOM

COMPONENTS

IS480P

The IS480P High Speed Photocoupler contains a AlGaAs LED and Photo detector with built-in Schmitt Trigger to provide logic-compatible waveforms, eliminating the need for additional wave shaping.

The totem pole output eliminates the need for a pull up resistor and allows for direct Intelligent Power Module Drive or Gate Drive. Minimized Propagation Delay difference between devices makes this photocoupler excellent solutions for improving inverter efficiency through reduced switching dead time.

The device is in Stretched SO6 package.
• Totem Pole Output
• Wide Operating Voltage Range

VCC 4.5V to 30V
• Operating Temperature Range
- 40°C to +105°C
• Performance specified for Common IPM

Applications over Industrial Temperature range.
• Maximum Propagation Delays
tPLH / tPHL 200ns / 220ns
• Propagation Delay Difference

Min / Max -210ns / 210ns
• Maximum Pulse Width Distortion

PWD 120ns
• Hysteresis
• 20kV/us Minimum Common Mode Rejection
at VCM 1500V
• Lead Free and RoHS Compliant
• Safety Approvals Pending
• Isolated IGBT/MOSFET Gate Drive
• IPM Interface Isolation
• Industrial Inverters
• AC Brushless and DC Motor Drives
• Digital Isolation

ORDER INFORMATION
• Supply in Tape & Reel
1 Anode 2 NC 3 Cathode 4 GND 5 VO 6 VCC

A 0.1uF bypass Capacitor must be connected between Pins 6 and

ABSOLUTE MAXIMUM RATINGS TA = 25°C

Stresses exceeding the absolute maximum ratings can cause permanent damage to the device. Exposure to absolute maximum ratings for long periods of time can adversely affect reliability.

Input

Forward Current Forward Peak Current

Pulse Width < 1us, 300pps
10mA 1.0A

Output

Output Current Output Voltage Supply Voltage
50mA -0.5V to 35V

Total Package

Isolation Voltage Total Power Dissipation Operating Temperature Storage Temperature Lead Soldering Temperature 10s
5000VRMS 145mW -40 to 105 °C -55 to 125 °C 260°C

ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate

Hartlepool, Cleveland, TS25 1PE, United Kingdom Tel +44 0 1429 863 609 Fax +44 0 1429 863 581
e-mail:
1 21/09/2016

ISOCOM COMPONENTS ASIA LTD Hong Kong Office,

Block A, 8/F, Wah Hing Industrial mansion, 36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong.

Tel +852 2995 9217 Fax +852 8161 6292 e-mail

DC93200

ISOCOM

COMPONENTS

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IS480P Datasheet file may be downloaded here without warranties.

Datasheet ID: IS480P 639277