AC002013

AC002013 Datasheet

Part Number AC002013

Part	Datasheet
AC002013	AC002013 (pdf)

PDF Datasheet Preview
PICDEM MC LV Demonstration Board The PICDEM MC LV Development Board is a development and evaluation tool that provides designers a quick and cost-effective method to evaluate both sensored and sensorless brushless DC BLDC motor control applications. Users can create embedded motor control applications using Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. Supported devices are provided in the table below. Two pre-programmed, Flash-based samples are provided in the kit including PIC18F2431 and dsPIC30F3010 devices. The board is also populated with an ICD connector for the 2 In-Circuit Debugger and an RS-232 port for external communication, LED indicators, push button switches, speed control potentiometer and motor sensor inputs. Finally, users can develop their application with a simple graphical interface, known as the Motor Control Graphical User Interface MC-GUI . The MC-GUI provides a quick and easy way for designers to configure and monitor their motor system parameters such as motor control type, motor speed, rotational direction, current, voltage and fault status. Supported Devices PIC18F2331 PIC18F2431 dsPIC30F2010 dsPIC30F3010 dsPIC30F4012 Packages 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP Key features of the PICDEM MC LV Development Kit include: • Supports PIC18F and motor control devices • Capable of driving motors up to 48V, Amps • Motor terminal strip • 3-phase voltage source inverter bridge • Over-current protection, level programmable using potentiometer • Temperature sensor with I2C interface • Push button switches and master reset • Test points for motor current and back EMF sensing • Speed control potentiometer • Active RS-232 connector • MPLAB ICD 2 connector • FREE! Motor Control GUI software • 3-phase, 24V BLDC motor optional Part Number AC300020 • 24V external power supply optional Part Number AC002013 Development Systems Package Contents • PICDEM MC LV Development Board with pre-programmed BLDC firmware PIC18F2431 and dsPIC30F3010 devices • Software and Documentation CD containing the MC-GUI, User’s Guide and sample applications programs Host System Requirements For the Motor Control GUI • PC-compatible system with an Intel or higher processor, or equivalent • A minimum of 16 MB RAM • A minimum of 16 MB available for hard drive space • CD-ROM drive • One available standard serial port with a matching COM port available through the operating system • Microsoft Windows 2000 or Windows XP Part Numbers and Ordering Information PICDEM MC LV Development Board Availability DM183021 PICDEM MC LV Development Board AC002013 24 Volt Power Supply optional AC300020 24V BLDC Motor with Cables optional Note For best results using the PICDEM MC LV Development Board, purchase of the optional 24V Power Supply AC002013 and 24V BLDC Motor with Cables AC300020 is recommended. IDE MPASM Assembler MPLINK Linker/MPLIB Librarian MPLAB SIM MPLAB C18 MPLAB C30 PICkit 1/PICkit 2 MPLAB ICD 2 MPLAB ICE 2000 MPLAB ICE 4000 Programmer MPLAB PM3 Device Programmer Kit Analog & Interface Boards Development Tools from Microchip Integrated Development Environment IDE Universal Linker/Librarian Simulator Software Simulator C Compiler for PIC18CXXX MCUs C Compiler for dsPIC30F MCUs PICkit 1 Flash Starter Kit/PICkit 2 Starter Kit In-Circuit Debugger Full-featured Modular In-Circuit Emulator for PIC12, PIC16 and PIC18 MCUs Full-featured Modular In-Circuit Emulator for PIC18 and dsPIC MCUs Entry-level Development Kit with Programmer Full-featured, Modular Device Programmer Encoder/Decoder Evaluator 125 kHz and MHz RFID Development Tools A variety of demonstration and evaluation boards for interface, linear, mixedsignal, power management and thermal management functions. Visit our web site at for additional product information and sales office locations. Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199 • 480-792-7200 Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro and PICSTART are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. MPASM, MPLIB, MPLINK and PICDEM are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. 2005, Microchip Technology Incorporated. All rights reserved. Printed in the U.S.A. 8/05 DS51573A DS51573A

PDF Datasheet Preview

PICDEM MC LV Demonstration Board

The PICDEM MC LV Development Board is a development and evaluation tool that provides designers a quick and cost-effective method to evaluate both sensored and sensorless brushless DC BLDC motor control applications. Users can create embedded motor control applications using Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. Supported devices are provided in the table below.

Two pre-programmed, Flash-based samples are provided in the kit including PIC18F2431 and dsPIC30F3010 devices. The board is also populated with an ICD connector for the 2 In-Circuit Debugger and an RS-232 port for external communication, LED indicators, push button switches, speed control potentiometer and motor sensor inputs.

Finally, users can develop their application with a simple graphical interface, known as the Motor Control Graphical User Interface MC-GUI . The MC-GUI provides a quick and easy way for designers to configure and monitor their motor system parameters such as motor control type, motor speed, rotational direction, current, voltage and fault status.

Supported Devices PIC18F2331 PIC18F2431 dsPIC30F2010 dsPIC30F3010 dsPIC30F4012

Packages 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP 28-pin SPDIP

Key features of the PICDEM MC LV Development Kit include:
• Supports PIC18F and motor control devices
• Capable of driving motors up to 48V, Amps
• Motor terminal strip
• 3-phase voltage source inverter bridge
• Over-current protection, level programmable using
potentiometer
• Temperature sensor with I2C interface
• Push button switches and master reset
• Test points for motor current and back EMF sensing
• Speed control potentiometer
• Active RS-232 connector
• MPLAB ICD 2 connector
• FREE! Motor Control GUI software
• 3-phase, 24V BLDC motor optional

Part Number AC300020
• 24V external power supply optional

Part Number AC002013

Development Systems

Package Contents
• PICDEM MC LV Development Board with pre-programmed BLDC firmware PIC18F2431 and dsPIC30F3010 devices
• Software and Documentation CD containing the MC-GUI, User’s Guide and sample applications programs

Host System Requirements For the Motor Control GUI
• PC-compatible system with an Intel or higher processor, or equivalent
• A minimum of 16 MB RAM
• A minimum of 16 MB available for hard drive space
• CD-ROM drive
• One available standard serial port with a matching COM
port available through the operating system
• Microsoft Windows
2000 or Windows XP
Part Numbers and Ordering Information

PICDEM MC LV Development Board

Availability

DM183021

PICDEM MC LV Development Board

AC002013
24 Volt Power Supply optional

AC300020
24V BLDC Motor with Cables optional

Note For best results using the PICDEM MC LV Development Board, purchase of the optional 24V Power Supply AC002013 and 24V BLDC Motor with Cables AC300020 is recommended.

IDE MPASM Assembler MPLINK Linker/MPLIB Librarian MPLAB SIM MPLAB C18 MPLAB C30 PICkit 1/PICkit 2 MPLAB ICD 2 MPLAB ICE 2000 MPLAB ICE 4000 Programmer MPLAB PM3 Device Programmer Kit Analog & Interface Boards

Development Tools from Microchip

Integrated Development Environment IDE Universal Linker/Librarian Simulator Software Simulator C Compiler for PIC18CXXX MCUs C Compiler for dsPIC30F MCUs PICkit 1 Flash Starter Kit/PICkit 2 Starter Kit In-Circuit Debugger Full-featured Modular In-Circuit Emulator for PIC12, PIC16 and PIC18 MCUs Full-featured Modular In-Circuit Emulator for PIC18 and dsPIC MCUs Entry-level Development Kit with Programmer Full-featured, Modular Device Programmer Encoder/Decoder Evaluator 125 kHz and MHz RFID Development Tools A variety of demonstration and evaluation boards for interface, linear, mixedsignal, power management and thermal management functions.

Visit our web site at for additional product information and sales office locations.

Microchip Technology Inc.
• 2355 W. Chandler Blvd.
• Chandler, AZ 85224-6199
• 480-792-7200

Information subject to change. The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, microID, MPLAB, PIC, PICmicro and PICSTART are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. MPASM, MPLIB, MPLINK and PICDEM are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. 2005, Microchip Technology Incorporated. All rights reserved. Printed in the U.S.A. 8/05

DS51573A
*DS51573A*

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AC002013 Datasheet file may be downloaded here without warranties.

Datasheet ID: AC002013 648185