MK3711DMI

MK3711DMI Datasheet

MK3711

Part	Datasheet
MK3711DMI	MK3711DMI (pdf)

Related Parts	Information
MK3711DM	MK3711DM

PDF Datasheet Preview
LOW COST 8 TO 16 MHZ VOLT VCXO DATASHEET MK3711 The MK3711D is a drop-in replacement for the original MK3711S device. Compared to these earlier devices, the MK3711D offers a wider operating frequency range and improved power supply noise rejection. Used in conjunction with an external pullable quartz crystal, this monolithic integrated circuit replaces more costly hybrid canned VCXO devices. The MK3711 is designed primarily for data and clock recovery applications within end products such as ADSL modems, set-top box receivers, and telecom systems. The MK3711D exhibits a moderate VCXO gain of 120ppm/V typical, when used with a high quality external pullable quartz crystal. The frequency of the on-chip VCXO is adjusted by an external control voltage input into pin VIN. Since VIN is a high impedance input, it can be driven directly from an PWM RC integrator circuit. Frequency output increases with VIN voltage input. The usable range of VIN is 0 to 3V. • MK3711D is a drop-in replacement for the earlier MK3711S device • MK3711D offers an 8-16 MHz output frequency range and improved power supply noise rejection • Uses an inexpensive 8 to 16 MHz external crystal • On-chip VCXO with guaranteed pull range of ±115 ppm minimum • VCXO tuning voltage 0 to V • Packaged in 8 pin SOIC 150 mil wide • Available in Pb lead free package • Industrial temperature range available MK3711B is Obsolete NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram 8-16 MHz X1 Pullable Crystal Voltage Controlled Crystal Oscillator VDD 8-16 MHz IDT LOW COST 8 TO 16 MHZ VOLT VCXO MK3711 MK3711 LOW COST 8 TO 16 MHZ VOLT VCXO Pin Assignment X1 1 VDD 2 VIN 3 GND 4 8 X2 7 DC 6 REF 5 DC MK3711D 8 Pi n 150 mi l SOIC VCXO AND MULTIPLIER Pin Descriptions Pin Number Pin Name XI VDD VIN GND DC REF DC X2 Pin Type Pin Description Input Crystal connection. Connect to the external pullable crystal. Power Connect to V 0.01uf decoupling capacitor recommended . Ordering Information Symbol A A1 B C D E H L α BASIC BASIC For reference only. Controlling dimensions in mm. h x 45 SEATING PLANE L Part / Order Number MK3711DM MK3711DMTR* MK3711DMLF MK3711DMLFTR MK3711DMI* MK3711DMITR* MK3711DMILF MK3711DMILFTR Marking MK3711DM 3711DMLF 3711DMI 3711DMIL Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT LOW COST 8 TO 16 MHZ VOLT VCXO MK3711 MK3711 LOW COST 8 TO 16 MHZ VOLT VCXO VCXO AND MULTIPLIER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW COST 8 TO 16 MHZ VOLT VCXO

DATASHEET

MK3711

The MK3711D is a drop-in replacement for the original MK3711S device. Compared to these earlier devices, the MK3711D offers a wider operating frequency range and improved power supply noise rejection.

Used in conjunction with an external pullable quartz crystal, this monolithic integrated circuit replaces more costly hybrid canned VCXO devices. The MK3711 is designed primarily for data and clock recovery applications within end products such as ADSL modems, set-top box receivers, and telecom systems.

The MK3711D exhibits a moderate VCXO gain of 120ppm/V typical, when used with a high quality external pullable quartz crystal.

The frequency of the on-chip VCXO is adjusted by an external control voltage input into pin VIN. Since VIN is a high impedance input, it can be driven directly from an PWM RC integrator circuit. Frequency output increases with VIN voltage input. The usable range of VIN is 0 to 3V.
• MK3711D is a drop-in replacement for the earlier

MK3711S device
• MK3711D offers an 8-16 MHz output frequency range
and improved power supply noise rejection
• Uses an inexpensive 8 to 16 MHz external crystal
• On-chip VCXO with guaranteed pull range of ±115 ppm
minimum
• VCXO tuning voltage 0 to V
• Packaged in 8 pin SOIC 150 mil wide
• Available in Pb lead free package
• Industrial temperature range available

MK3711B is Obsolete

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram
8-16 MHz X1

Pullable

Crystal

Voltage Controlled

Crystal Oscillator

VDD 8-16 MHz

IDT LOW COST 8 TO 16 MHZ VOLT VCXO

MK3711

MK3711 LOW COST 8 TO 16 MHZ VOLT VCXO

Pin Assignment

X1 1 VDD 2 VIN 3 GND 4
8 X2 7 DC 6 REF 5 DC

MK3711D 8 Pi n 150 mi l SOIC

VCXO AND MULTIPLIER

Pin Descriptions

Pin Number

Pin Name

XI VDD VIN

GND DC REF

DC X2

Pin Type

Pin Description

Input Crystal connection. Connect to the external pullable crystal.

Power Connect to V 0.01uf decoupling capacitor recommended .
Ordering Information

Symbol A A1 B C D E H L α

BASIC

BASIC
*For reference only. Controlling dimensions in mm.
h x 45

SEATING

PLANE L

Part / Order Number

MK3711DM* MK3711DMTR* MK3711DMLF MK3711DMLFTR

MK3711DMI* MK3711DMITR* MK3711DMILF MK3711DMILFTR

Marking

MK3711DM 3711DMLF
3711DMI 3711DMIL

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT LOW COST 8 TO 16 MHZ VOLT VCXO

MK3711

MK3711 LOW COST 8 TO 16 MHZ VOLT VCXO

VCXO AND MULTIPLIER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK3711DMI Datasheet file may be downloaded here without warranties.

Datasheet ID: MK3711DMI 637474