IDT5V9351PFGI8

IDT5V9351PFGI8 Datasheet

IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER

Part	Datasheet
IDT5V9351PFGI8	IDT5V9351PFGI8 (pdf)

Related Parts	Information
IDT5V9351PFGI	IDT5V9351PFGI

PDF Datasheet Preview
IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER LOW VOLTAGE PLL CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE IDT5V9351 PRODUCT DISCONTINUATION NOTICE - LAST TIME BUY EXPIRES OCTOBER 28, 2014 FEATURES: • Fully integrated PLL • Output frequency up to 200MHz • 2.5V and 3.3V Compatible • Compatible with PowerPC , Intel, and high performance RISC microprocessors • Output frequency configurable • Cycle-to-cycle jitter max. 22ps RMS • Compatible with MPC9351 • Available in TQFP package • Use replacement part 87951AYI-147LF DESCRIPTION: The IDT5V9351 is a high performance, zero delay, low skew, phase-lock loop PLL clock driver. It has four banks of configurable outputs. The IDT5V9351 uses a differential PECL reference input and an external feedback input. These features allow the IDT5V9351 to be used as a zero delay, low skew fan-out buffer. REF_SEL allows selection between PECL input or TCLK, a CMOS clock driver input. If PLL_EN is set to low and REF_SEL to high, it will bypass the PLL. By doing so, the IDT5V9351 will be in clock buffer mode. Any clock applied to TCLK will be divided down to four output banks. When PLL_EN is set high, PLL is enabled. Any clock applied to TCLK will be clocked in both phase and frequency to FBIN. PECL clock is activated by setting REF_SEL to low. FUNCTIONAL BLOCK DIAGRAM PECL_CLK tCLK pullup pulldown 0 REF REF_SEL pulldown FBIN pulldown 200 - 400MHz PLL_En pullup fSELA fSELB fSELC fSELD pulldown pulldown The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE 2013 Integrated Device Technology, Inc. QC0 QC1 QD0 QD1 QD2 QD3 QD4 MAY 2013 DSC-5972/18 IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER PIN CONFIGURATION REF_SEL PLL_EN TCLK GND QA VCC QB GND VCCA FBIN fSELA fSELB fSELC fSELD GND PECL_CLK 32 31 30 29 28 27 26 25 9 10 11 12 13 14 15 16 INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION Device Type Package INDUSTRIAL TEMPERATURE RANGE -40ºC to +85ºC Industrial TFQP - Green 5V9351 Low Voltage PLL Clock Driver IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE Table Discription of Change NRND - Not Recommended for New Designs Product Discontinuation Notice - Last Time Buy Expires October 28, 2014 - PDN# CQ-13-02 Date 5/20/13 12/19/13 IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER INDUSTRIAL TEMPERATURE RANGE We’ve Got Your Timing Solution. 6024 Silver Creek Valley Road San Jose, CA 95138 Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Tech Support +480-763-2056 DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright All rights reserved.

PDF Datasheet Preview

IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER

LOW VOLTAGE PLL CLOCK DRIVER

INDUSTRIAL TEMPERATURE RANGE

IDT5V9351

PRODUCT DISCONTINUATION NOTICE - LAST TIME BUY EXPIRES OCTOBER 28, 2014

FEATURES:
• Fully integrated PLL
• Output frequency up to 200MHz
• 2.5V and 3.3V Compatible
• Compatible with PowerPC , Intel, and high performance RISC
microprocessors
• Output frequency configurable
• Cycle-to-cycle jitter max. 22ps RMS
• Compatible with MPC9351
• Available in TQFP package
• Use replacement part 87951AYI-147LF

DESCRIPTION:

The IDT5V9351 is a high performance, zero delay, low skew, phase-lock loop PLL clock driver. It has four banks of configurable outputs. The IDT5V9351 uses a differential PECL reference input and an external feedback input. These features allow the IDT5V9351 to be used as a zero delay, low skew fan-out buffer. REF_SEL allows selection between PECL input or TCLK, a CMOS clock driver input.

If PLL_EN is set to low and REF_SEL to high, it will bypass the PLL. By doing so, the IDT5V9351 will be in clock buffer mode. Any clock applied to TCLK will be divided down to four output banks.

When PLL_EN is set high, PLL is enabled. Any clock applied to TCLK will be clocked in both phase and frequency to FBIN. PECL clock is activated by setting REF_SEL to low.

FUNCTIONAL BLOCK DIAGRAM

PECL_CLK
tCLK
pullup pulldown
0 REF

REF_SEL
pulldown

FBIN
pulldown
200 - 400MHz

PLL_En
pullup
fSELA fSELB fSELC fSELD
pulldown
pulldown

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

INDUSTRIAL TEMPERATURE RANGE
2013 Integrated Device Technology, Inc.

QC0 QC1

QD0 QD1 QD2 QD3 QD4

MAY 2013

DSC-5972/18

IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER

PIN CONFIGURATION

REF_SEL PLL_EN TCLK GND QA VCC QB GND

VCCA FBIN fSELA fSELB fSELC fSELD GND PECL_CLK
32 31 30 29 28 27 26 25
9 10 11 12 13 14 15 16

INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION

Device Type Package

INDUSTRIAL TEMPERATURE RANGE
-40ºC to +85ºC Industrial

TFQP - Green
5V9351 Low Voltage PLL Clock Driver

IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER

INDUSTRIAL TEMPERATURE RANGE

Table

Discription of Change

NRND - Not Recommended for New Designs Product Discontinuation Notice - Last Time Buy Expires October 28, 2014 - PDN# CQ-13-02

Date 5/20/13 12/19/13

IDT5V9351 LOW VOLTAGE PLL CLOCK DRIVER

INDUSTRIAL TEMPERATURE RANGE

We’ve Got Your Timing Solution.
6024 Silver Creek Valley Road San Jose, CA 95138

Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

Tech Support +480-763-2056

DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.

Copyright All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDT5V9351PFGI8 Datasheet file may be downloaded here without warranties.

Datasheet ID: IDT5V9351PFGI8 637296