ICS601G-21

ICS601G-21 Datasheet

ICS601-21

Part	Datasheet
ICS601G-21	ICS601G-21 (pdf)

Related Parts	Information
ICS601G-21T	ICS601G-21T

PDF Datasheet Preview
LOW PHASE NOISE CLOCK MULTIPLIER DATASHEET ICS601-21 The ICS601-21 is a low-cost, low phase noise, high performance clock synthesizer for applications which require low phase noise and low jitter. It is ICS’ lowest phase noise multiplier. Using ICS’ patented analog and digital Phase Locked Loop PLL techniques, the chip accepts a 10 - 27 MHz crystal or clock input, and produces output clocks up to 220 MHz at V. This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed. • Fully integrated PLL, no external loop filter required • Differential V LVPECL outputs • Uses fundamental 10 - 27 MHz crystal or clock • Output clocks up to 220 MHz at V • Low phase noise -122 dBc/Hz at 10 kHz • Low jitter - 15 ps one sigma typ. • Powerdown mode lowers power consumption • Packaged in 16-pin TSSOP • Advanced, low power, sub-micron CMOS process • Operating voltage of V • Commercial temperature range available • Available in Pb lead free package Block Diagram X1/ICLK Crystal or clock input Reference Divider Crystal Oscillator Phase Comparator Charge Pump Loop Filter ROM Based Multipliers VCO Divide 4 S2:0 CLK nCLK IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER ICS601-21 ICS601-21 LOW PHASE NOISE CLOCK MULTIPLIER CLOCK MULTIPLIER Pin Assignment Multiplier Select Table GND 8 16 X2 15 GND 14 CLK 13 nCLK 12 VDD 11 S0 10 S1 16 Pin 173 m il TSSOP Pin Descriptions Multiplier x1 x2 x3 x4 x5 x6 x8 x16 0 = connect directly to ground 1 = connect directly to VDD Pin Number 2-4 5 6 7-8 9 10 11 12 13 14 15 16 Pin Name VDD GND VDD GND S2 S1 S0 VDD nCLK CLK GND X2 Pin Type Power Input Power Output Power Pin Description Crystal or clock input. Connect to a 10-27 MHz fundamental parallel mode crystal or clock input. Connect to V. Connect to ground. Connect to V. Connect to ground. Select pin Internal pull-up resistor. Select pin Internal pull-up resistor. Select pin Internal pull-up resistor. Connect to V. Inverted differential clock output. Differential clock output. Connect to ground. Crystal connection. Connect to 10-27MHz fundamental parallel mode crystal or leave unconnected for clock input. IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER ICS601-21 Ordering Information SEATING PLANE aaa C Part / Order Number 601G-21 601G-21T 601G-21LF 601G-21LFT Marking ICS601G-21 ICS601G-21 601G-21LF 601G-21LF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems ICS assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER ICS601-21 ICS601-21 LOW PHASE NOISE CLOCK MULTIPLIER CLOCK MULTIPLIER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support <product line email> <product line phone> Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW PHASE NOISE CLOCK MULTIPLIER

DATASHEET

ICS601-21

The ICS601-21 is a low-cost, low phase noise, high performance clock synthesizer for applications which require low phase noise and low jitter. It is ICS’ lowest phase noise multiplier. Using ICS’ patented analog and digital Phase Locked Loop PLL techniques, the chip accepts a 10 - 27 MHz crystal or clock input, and produces output clocks up to 220 MHz at V.

This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed.
• Fully integrated PLL, no external loop filter required
• Differential V LVPECL outputs
• Uses fundamental 10 - 27 MHz crystal or clock
• Output clocks up to 220 MHz at V
• Low phase noise -122 dBc/Hz at 10 kHz
• Low jitter - 15 ps one sigma typ.
• Powerdown mode lowers power consumption
• Packaged in 16-pin TSSOP
• Advanced, low power, sub-micron CMOS process
• Operating voltage of V
• Commercial temperature range available
• Available in Pb lead free package

Block Diagram

X1/ICLK Crystal or clock input

Reference Divider

Crystal Oscillator

Phase Comparator

Charge Pump

Loop Filter

ROM Based Multipliers

VCO Divide
4 S2:0

CLK nCLK

IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER

ICS601-21

ICS601-21 LOW PHASE NOISE CLOCK MULTIPLIER

CLOCK MULTIPLIER

Pin Assignment

Multiplier Select Table

GND 8
16 X2 15 GND 14 CLK 13 nCLK 12 VDD 11 S0 10 S1
16 Pin 173 m il TSSOP

Pin Descriptions

Multiplier x1 x2 x3 x4 x5 x6 x8 x16
0 = connect directly to ground 1 = connect directly to VDD

Pin Number
2-4 5 6
7-8 9 10 11 12 13 14 15 16

Pin Name

VDD GND VDD GND

S2 S1 S0 VDD nCLK CLK GND X2

Pin Type

Power Input Power Output Power

Pin Description

Crystal or clock input. Connect to a 10-27 MHz fundamental parallel mode crystal or clock input. Connect to V. Connect to ground. Connect to V. Connect to ground. Select pin Internal pull-up resistor. Select pin Internal pull-up resistor. Select pin Internal pull-up resistor. Connect to V. Inverted differential clock output. Differential clock output. Connect to ground. Crystal connection. Connect to 10-27MHz fundamental parallel mode crystal or leave unconnected for clock input.

IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER

ICS601-21
Ordering Information

SEATING PLANE
aaa C

Part / Order Number 601G-21 601G-21T
601G-21LF 601G-21LFT

Marking ICS601G-21 ICS601G-21 601G-21LF 601G-21LF

Shipping Packaging Tubes

Tape and Reel Tubes

Tape and Reel

Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP

Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems ICS assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments.

IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER

ICS601-21

ICS601-21 LOW PHASE NOISE CLOCK MULTIPLIER

CLOCK MULTIPLIER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
<product line email> <product line phone>

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS601G-21 Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS601G-21 637027