MAX13170ECAI+T

MAX13170ECAI+T Datasheet

MAX13170E

Part	Datasheet
MAX13170ECAI+T	MAX13170ECAI+T (pdf)

Related Parts	Information
MAX13170ECAI+	MAX13170ECAI+

PDF Datasheet Preview
MAX13170E EVAALVUAAILTAIOBNLEKIT +5V Multiprotocol, 3Tx/3Rx, SoftwareSelectable Clock/Data Transceiver The MAX13170E is a three-driver/three-receiver multiprotocol transceiver that operates from a +5V single supply. The MAX13170E, along with the MAX13172E and the MAX13174E, form a complete software-selectable data terminal equipment DTE or data communication equipment DCE interface port that supports the V.28 RS-232 , V.10/V.11 RS-449/V.36, EIA-530, EIA-530A, X.21 , and V.35 protocols. The MAX13170E transceivers carry the high-speed clock and data signals, while the MAX13172E carry the control signals. The MAX13170E can be terminated by the MAX13174E software-selectable resistor termination network or by discrete termination networks. The MAX13170E has an internal charge pump and a proprietary low-dropout transmitter output stage that allows V.11-, V.28-, and V.35-compliant operation from a +5V single supply. The MAX13170E features a nocable mode that reduces supply current to 0.5µA, and disables all high-impedance transmitter and receiver outputs. Short-circuit current limiting and thermal shutdown circuitry protect the receiver and transmitter outputs against excessive power dissipation. The MAX13170E has extended ESD protection for all the transmitter outputs and receivers inputs. The MAX13170E is available in a 5.3mm x 10.2mm, 28-pin SSOP package and operates over the 0°C to +70°C commercial temperature range. Data Networking CSU and DSU Data Routers PCI Cards Telecommunications Equipment Pin Configuration appears at end of data sheet. The MAX13170E/MAX13172E/MAX13174E Chipset is a Pin-for-Pin Upgrade to the MXL1544/MAX3175/ MXL1543/MXL1543B Chipset Supports RS-232, RS-449, EIA-530, EIA-530A, V.35, V.36, and X.21 Software-Selectable Cable Termination Using the MAX13174E Complete DTE or DCE Port with the MAX13172E/MAX13174E Fail-Safe Receivers +5V Single-Supply Operation 0.5µA No-Cable Mode TUV-Certified NET1/NET2 and TBR1/TBR2Compliant Pending Extended ESD Protection for All the Transmitter Outputs and Receivers Inputs to GND ±13kV Using the Human Body Model ±8kV Using the Contact Method Specified in IEC 61000-4-2 ±5kV Using the Air-Gap Discharge Method Specified in IEC 61000-4-2 Ordering Information PART MAX13170ECAI+ TEMP RANGE 0°C to +70°C +Denotes a lead-free package. PIN-PACKAGE 28 SSOP Typical Operating Circuit LL CTS DSR DCD DTR RTS RXD RXC TXC SCTE TXD T4 R4 MAX13172E R1 MAX13170E R1 MAX13174E 18 13 5 10 8 22 6 23 20 19 4 1 7 16 3 9 17 12 15 11 24 14 2 TXD A 103 TXD B SCTE A 113 SCTE B TXC A 114 TXC B RXC A 115 RXC B RXD A 104 RXD B SG 102 SHIELD 101 RTS A 105 RTS B DTR A 108 DTR B DCD A 107 DCD B DSR A 109 DSR B CTS A 106 CTS B LL A 141 DB-25 CONNECTOR Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at +5V Multiprotocol, 3Tx/3Rx, SoftwareSelectable Clock/Data Transceiver MAX13170E ABSOLUTE MAXIMUM RATINGS All voltages referenced to GND, unless otherwise noted. Supply Voltages VCC to +6V Charge-Pump Output Voltages VDD to +7.1V to -7.1V VDD to VCC to +6V Logic Input Voltages M0, M1, M2, DCE/DTE, T_IN ................................-0.3V to +6V Logic Output Voltages R_OUT to VCC + 0.3V Transmitter Outputs T_OUT_, T3OUT_/R1IN_ No Cable Mode or V.28 to +15V Short-Circuit Duration to Receiver Inputs R_IN_T3OUT_/R1IN_ to +15V R_INA to R_INB, T3OUT/R1INA to +15V Continuous Power Dissipation TA = +70°C 28-Pin SSOP derate 9.5mW/°C above +70°C ...........762mW Junction-to-Case Thermal Resistance Note 1 28-Pin SSOP Junction-to-Ambient Thermal Resistance Note 1 28-Pin SSOP Operating Temperature Range ................................0°C to 70°C Junction Temperature Storage Temperature Range ............................-65°C to +150°C Lead Temperature soldering, 10s ................................+300°C Note 1 Package thermal resistances were obtained using the method described in JESD51-7, using a 4-layer board. For detailed information on package thermal considerations, refer to Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS VCC = 4.5V to 5.5V, C3 = C4 = C5 = 4.7µF, C1 = C2 = 1µF, TA = TMIN to TMAX. Typical values are at VCC = 5V, and TA = +25°C. Note 2 PARAMETER VCC Operating Range VCC Supply Current DCE Mode Digital Inputs = GND or VCC Transmitter Outputs Static SYMBOL VCC CONDITIONS V.11 mode, no load V.11 mode, full load V.35 mode, no load V.35 mode, full load V.28 mode, no load MIN TYP MAX UNITS 133 180 153 195 Internal Power Dissipation DCE Mode V.28 mode, full load No cable mode V.11 mode, full load V.35 mode, full load V.28 mode, full load V.28, V.35 modes, no load Positive Charge-Pump Output Voltage Note 3 V.28, V.35 modes, with load, IDD = 10mA V.11 mode V.11 mode, VDD variation, IDD = 0mA to 25mA V.28, V.35 modes, no load Negative Charge-Pump Output Voltage V.28, V.35 modes, with load, IEE = 10mA Note 3 V.11 mode Note 3

PDF Datasheet Preview

MAX13170E

EVAALVUAAILTAIOBNLEKIT +5V Multiprotocol, 3Tx/3Rx, SoftwareSelectable Clock/Data Transceiver

The MAX13170E is a three-driver/three-receiver multiprotocol transceiver that operates from a +5V single supply. The MAX13170E, along with the MAX13172E and the MAX13174E, form a complete software-selectable data terminal equipment DTE or data communication equipment DCE interface port that supports the V.28 RS-232 , V.10/V.11 RS-449/V.36, EIA-530, EIA-530A, X.21 , and V.35 protocols. The MAX13170E transceivers carry the high-speed clock and data signals, while the MAX13172E carry the control signals. The MAX13170E can be terminated by the MAX13174E software-selectable resistor termination network or by discrete termination networks.

The MAX13170E has an internal charge pump and a proprietary low-dropout transmitter output stage that allows V.11-, V.28-, and V.35-compliant operation from a +5V single supply. The MAX13170E features a nocable mode that reduces supply current to 0.5µA, and disables all high-impedance transmitter and receiver outputs. Short-circuit current limiting and thermal shutdown circuitry protect the receiver and transmitter outputs against excessive power dissipation. The MAX13170E has extended ESD protection for all the transmitter outputs and receivers inputs.

The MAX13170E is available in a 5.3mm x 10.2mm, 28-pin SSOP package and operates over the 0°C to +70°C commercial temperature range.

Data Networking CSU and DSU Data Routers

PCI Cards

Telecommunications Equipment

Pin Configuration appears at end of data sheet.

The MAX13170E/MAX13172E/MAX13174E Chipset is a Pin-for-Pin Upgrade to the MXL1544/MAX3175/ MXL1543/MXL1543B Chipset

Supports RS-232, RS-449, EIA-530, EIA-530A, V.35, V.36, and X.21

Software-Selectable Cable Termination Using the MAX13174E

Complete DTE or DCE Port with the MAX13172E/MAX13174E

Fail-Safe Receivers
+5V Single-Supply Operation
0.5µA No-Cable Mode

TUV-Certified NET1/NET2 and TBR1/TBR2Compliant Pending

Extended ESD Protection for All the Transmitter Outputs and Receivers Inputs to GND ±13kV Using the Human Body Model ±8kV Using the Contact Method Specified in IEC 61000-4-2 ±5kV Using the Air-Gap Discharge Method Specified in IEC 61000-4-2
Ordering Information

PART MAX13170ECAI+

TEMP RANGE 0°C to +70°C
+Denotes a lead-free package.

PIN-PACKAGE 28 SSOP

Typical Operating Circuit

LL CTS DSR

DCD DTR RTS

RXD RXC

TXC SCTE TXD

T4 R4

MAX13172E R1

MAX13170E R1

MAX13174E
18 13 5 10 8
22 6 23 20 19 4
1 7 16 3 9 17
12 15 11 24 14 2

TXD A 103 TXD B SCTE A 113 SCTE B TXC A 114 TXC B

RXC A 115 RXC B RXD A 104 RXD B SG 102 SHIELD 101

RTS A 105 RTS B DTR A 108 DTR B DCD A 107 DCD B

DSR A 109 DSR B CTS A 106 CTS B LL A 141

DB-25 CONNECTOR

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at
+5V Multiprotocol, 3Tx/3Rx, SoftwareSelectable Clock/Data Transceiver

MAX13170E

ABSOLUTE MAXIMUM RATINGS

All voltages referenced to GND, unless otherwise noted. Supply Voltages

VCC to +6V Charge-Pump Output Voltages

VDD to +7.1V to -7.1V VDD to VCC to +6V Logic Input Voltages M0, M1, M2, DCE/DTE, T_IN ................................-0.3V to +6V Logic Output Voltages R_OUT to VCC + 0.3V Transmitter Outputs T_OUT_, T3OUT_/R1IN_ No Cable Mode
or V.28 to +15V Short-Circuit Duration to

Receiver Inputs R_IN_T3OUT_/R1IN_ to +15V R_INA to R_INB, T3OUT/R1INA to +15V

Continuous Power Dissipation TA = +70°C 28-Pin SSOP derate 9.5mW/°C above +70°C ...........762mW

Junction-to-Case Thermal Resistance Note 1 28-Pin SSOP

Junction-to-Ambient Thermal Resistance Note 1 28-Pin SSOP

Operating Temperature Range ................................0°C to 70°C Junction Temperature Storage Temperature Range ............................-65°C to +150°C

Lead Temperature soldering, 10s ................................+300°C

Note 1 Package thermal resistances were obtained using the method described in JESD51-7, using a 4-layer board. For detailed information on package thermal considerations, refer to

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

VCC = 4.5V to 5.5V, C3 = C4 = C5 = 4.7µF, C1 = C2 = 1µF, TA = TMIN to TMAX. Typical values are at VCC = 5V, and TA = +25°C. Note 2

PARAMETER VCC Operating Range

VCC Supply Current DCE Mode Digital Inputs = GND or VCC Transmitter Outputs Static

SYMBOL VCC

CONDITIONS

V.11 mode, no load V.11 mode, full load V.35 mode, no load V.35 mode, full load V.28 mode, no load

MIN TYP MAX UNITS
133 180
153 195

Internal Power Dissipation DCE Mode

V.28 mode, full load

No cable mode

V.11 mode, full load

V.35 mode, full load

V.28 mode, full load

V.28, V.35 modes, no load

Positive Charge-Pump Output Voltage Note 3

V.28, V.35 modes, with load, IDD = 10mA V.11 mode

V.11 mode, VDD variation, IDD = 0mA to 25mA

V.28, V.35 modes, no load

Negative Charge-Pump Output Voltage

V.28, V.35 modes, with load, IEE = 10mA

Note 3

V.11 mode Note 3

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX13170ECAI+T Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX13170ECAI+T 647217