ICS508MI
ICS508MI Datasheet
ICS508
| Part | Datasheet |
|---|---|
ICS508MI |
ICS508MI (pdf) |
| Related Parts | Information |
|---|---|
|
ICS508MT |
ICS508MT |
|
ICS508MIT |
ICS508MIT |
|
ICS508M |
ICS508M |
| PDF Datasheet Preview |
|---|
| PECL TO CMOS CONVERTER DATASHEET ICS508 The ICS508 is the most cost effective way to generate a high quality, high frequency CMOS clock output from a PECL clock input. The ICS508 has separate VDD supplies for the PECL input buffer and the output buffer, allowing different voltages to be used. For example, the input clock could use a V supply while the output operates from 2.5V. The device has an Output Enable pin that tri-states the clock output when the OE pin is taken low. The ICS508 is a member of IDT’s ClockBlocksTM family. • Packaged in 8 pin SOIC or die • Separate VDD supplies allow voltage translation • Clock frequency of 0 - 250 MHz • Duty cycle of 45/55 • Operating voltages of to 5.5V • Tri-state output for board level testing • 24mA output drive capability • Industrial temperature version available • Advanced, low power, sub-micron CMOS process NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram PECLIN VDDP GND VDDC O utp ut Buffer OE GND IDT / ICS PECL TO CMOS CONVERTER ICS508 ICS508 PECL TO CMOS CONVERTER Pin Assignment PECL TO CMOS TRANSLATOR VDDP PECLIN 2 PECLIN 3 GND 4 VDDC 8 Pin 150 mil SOIC Pin Descriptions Pin Number 1 2 3 4 5 Pin Name VDDP PECLIN GND OE GND CLK VDDC Pin Type Pin Description Output Connect to 3.3V or 5V. Supplies PECL input buffer. Input Complementary PECL clock input. Input PECL clock input. Power Connect to ground. Input Output enable. Tri-states CLK output when low. Internal pull-up to VDDC. Power Connect to ground. Output Clock output. *Ordering Information A1 -C- SEATING PLANE h x 45 Part / Order Number 508M* 508MT* 508MI* 508MIT* 508MLF 508MLFT 508MILF 508MILFT 508-DWF 508-DPK Marking see page 6 Shipping Packaging Package Tubes 8 pin SOIC Tape and Reel 8 pin SOIC Tubes 8 pin SOIC Tape and Reel 8 pin SOIC Tubes 8 pin SOIC Tape and Reel 8 pin SOIC Tubes 8 pin SOIC Tape and Reel 8 pin SOIC Die on uncut, probed wafers Tested die in waffle pack Temperature 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS PECL TO CMOS CONVERTER ICS508 ICS508 PECL TO CMOS CONVERTER PECL TO CMOS TRANSLATOR Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters |
| More datasheets: FGG.XB.312.CLAD62 | FGG.XB.312.CLAD62Z | FGG.XB.322.CLAD72 | EGG.XB.312.ZLL | EGG.XB.322.CLL | EGG.XB.322.ZLL | IRFS350A | 8430DY-111LFT | 8430DY-111LF | ICS508MT |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS508MI Datasheet file may be downloaded here without warranties.