ICS8430-111
Part | Datasheet |
---|---|
![]() |
8430DY-111LFT (pdf) |
Related Parts | Information |
---|---|
![]() |
8430DY-111LF |
PDF Datasheet Preview |
---|
700MHz, Low Jitter, Differential-to3.3V LVPECL Frequency Synthesizer ICS8430-111 PRELIMINARY DATA SHEET The ICS8430-111 is a general purpose, dual out- put high frequency synthesizer and a member of HiPerClockS the HiPerClockS family of High Performance Clock Solutions from IDT. The CLK, nCLK pair can accept most standard differential input levels. The single ended TEST_CLK input accepts LVCMOS or LVTTL input levels and translates them to 3.3V LVPECL levels. The VCO operates at a frequency range of 200MHz to 700MHz. With the output config- ured to divide the VCO frequency by 2, output frequency steps as small as 2MHz can be achieved using a 16MHz differential or single ended reference clock. Output frequencies up to 700MHz can be programmed using the serial or parallel interfaces to the configuration logic. The low jitter and frequency range of the ICS8430-111 makes it an ideal clock generator for most clock tree applications. • Dual differential 3.3V LVPECL output • Selectable 14MHz to 27MHz differential CLK, nCLK or TEST_CLK input • CLK, nCLK accepts any differential input signal LVPECL, LVHSTL, LVDS, SSTL, HCSL • TEST_CLK accepts the following input types LVCMOS, LVTTL • Output frequency range up to 700MHz • VCO range 200MHz to 700MHz • Parallel or serial interface for programming counter and output dividers • Cycle-to-cycle jitter 25ps maximum • 3.3V supply voltage • 0°C to 70°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages • Industrial termperature information available upon request BLOCK DIAGRAM PIN ASSIGNMENT nCLK nP_LOAD VCO_SEL M0 M1 M2 M3 M4 VCO_SEL CLK_SEL TEST_CLK nCCLLKK ÷ 16 PLL PHASE DETECTOR VCO ÷M 0 ÷N FOUT0 nFOUT0 FOUT1 nFOUT1 TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 8430DY-111 ICS8430DY-111 32 Lead LQFP tray 0°C to 70°C 8430DY-111T ICS8430DY-111 32 Lead LQFP 1000 tape & reel 0°C to 70°C 8430DY-111LF ICS8430D111L 32 Lead "Lead-Free" LQFP tray 0°C to 70°C 8430DY-111LFT ICS8430D111L 32 Lead "Lead-Free" LQFP 1000 tape & reel 0°C to 70°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. 2009 Integrated Device Technology, Inc. ICS8430-111 Preliminary Data Sheet 700MHZ, LOW JITTER DIFFERENTIAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER 6024 Silver Creek Valley Road San Jose, CA 95138 Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Techical Support +480-763-2056 DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performace, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitablity of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Techology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright All rights reserved. |
More datasheets: PHG.XB.322.CLLD82 | PHG.XB.312.CLLD52Z | PHG.XB.312.CLLD72 | FGG.XB.312.CLAD62 | FGG.XB.312.CLAD62Z | FGG.XB.322.CLAD72 | EGG.XB.312.ZLL | EGG.XB.322.CLL | EGG.XB.322.ZLL | IRFS350A |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8430DY-111LFT Datasheet file may be downloaded here without warranties.