IDT8102-25VPCNSG
IDT8102-25VPCNSG Datasheet
DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.
| Part | Datasheet |
|---|---|
IDT8102-25VPCNSG |
IDT8102-25VPCNSG (pdf) |
| Related Parts | Information |
|---|---|
IDT8102-25VPCNVG |
IDT8102-25VPCNVG |
IDT8102-40VPCNSG |
IDT8102-40VPCNSG |
IDT8102-50VPCNVG |
IDT8102-50VPCNVG |
| PDF Datasheet Preview |
|---|
| Active Crystals Ultra Low Power CrystalFree Oscillators • Frequency Range • Output Type • Initial Frequency Tolerance • Supply Voltage • Power Consumption • Standby Current • Standard Package: • Operating Temperature: 4 to 50 MHz CMOS ± 50 ppm to V mA V < 1 uA x mm x mm 0 to 70 °C -20 to 70 °C 8102 PRELIMINARY DATA SHEET This product is rated “Green”, please contact factory for environmental compliancy information Specification Parameter Supply Voltage Symbol VDD Output Frequency FOUT Initial Frequency Tolerance FTOL Supply Current Quiescent Current ISTBY Input LOW level Input HIGH level Output LOW level Output HIGH level Tolerance over Temperature Rise/Fall Time VOH FTEMP TR /TF Symmetry Start-up time Period Jitter TST PJRMS Cycle to Cycle Jitter CCJMAX *Aging is negligible over lifetime ns 17 ps 120 ps Specifications 4 to 50 MHz ± 50 ppm 1 uA max VDD max VDD min VDD max VDD min ± 100 ppm 45% / 55% 400 us Conditions Nominal See ordering code 25°C Typical No load condition 25°C STBY# = GND At STBY# pin IOL = - 1 mA IOH = 1 mA -20 to 70°C 20% to 80% x VDD. Output load CL = 4 pF Output valid time after VDD meets the specified range & STBY# transition 4 pF load 50 MHz 4 pF load 50 MHz Package Outline and Dimensions 4L SMD x 3.2mm Pin #1 ID Chamfer x 45° Top View 4L SMD x 2.0mm Bottom View Pin #1 ID Chamfer x 45° Ref. Side View Ref. Typical PCB Land Pattern STBY# STBY# GND Top View Bottom View Side View June 1, 2011 2011 Integrated Device Technology, Inc 8102 Datasheet Absolute Maximum Ratings Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings are stress specifications only. Functional operation of product at these or under any condition beyond those listed in the operating specifications is not implied. Exposure to absolute maximum rated conditions may affect product reliability. Item VDD STBY# OUT Storage Temperature Maximum Absolute Rating V V to VDD + V to VDD + V -65°C to 150°C Pin Descriptions Pin # Name STBY# Standby Mode1 0 = Output Disabled OUT2 Ground CMOS Output Power Pulled high internally Weak pull down to GND during STBY# enable and startup Ordering Information Solder Reflow Profile CrystalFree Oscillator Temperature °C 3°C/sec max 250 200 150°C 150 100 50 245°C 260°C max 217°C 40 sec max 6°C/sec max 60-180 sec 60-150 sec Time Output Waveform VOL SYM = t1 / t2 TF t1 Time 8 1 0 2 - 50 V P C N S G E T Frequency 4 to 50MHz Package NSG x 4 pin NVG x 4 pin Temp Blank 0 to 70°C E -20 to 70°C Shipping Blank Tubes T Tape and Reel 6024 Silver Creek Valley Road San Jose, California 95138 Sales 800-345-7015 inside USA +1 408-284-8200 outside USA Fax 408-284-2775 Technical Support +1 408-739-5400 DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright 2010, All rights reserved. June 1, 2011 2011 Integrated Device Technology, Inc |
| More datasheets: 83905AK-01LFT | 83905AG-01LFT | 83905AK-01LF | DEMM9PK87 | DDMM50SR | LX2206 EVAL KIT | LTST-C193KRKT-2A | MDM-25PCBRM7 | 1000671086 | NDS9956A |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDT8102-25VPCNSG Datasheet file may be downloaded here without warranties.